Am new to linux and am trying to install NS2 on Fedora 14 running on VMware, the am following the instructions at: [url], however, on step 5: tclcl installation am receiving the follow error and have tried to look at other posts but no luck.
View 7 Replies
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
I have a hard drive which already has Windows installed. On a new hard drive, I have Ubuntu Linux installed.Is there anyway to run my already installed Windows using Vmware Player on my Ubuntu setup?
View 1 Replies View RelatedI want to install Ubuntu but not as Dual-Boot (Other OS is Windows XP x64 edition).
Does Wubi perform significantly better than an Ubuntu version installed on VMWare or VirtualBox?
My computer has:Intel Core2 Quad Q8200 @ 2.33GHz. 4GB RAM. An almost empty 450GB HD (defragmented)
I just installed Red Hat Linux Professional 8.0 in my VMWare, but I do not know how to start X Windows. I have tried to type "startx" on "RUN", but I get error message: Fatal Server error Server already active for display 0. If this server is no longer running, remove tmp/.X0-lock and start again.
View 1 Replies View RelatedI have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed
The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".
Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
I tried this command and find the this message
[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.4.3" anyway? [no] yes
What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]
Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"
I want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...
[Code].....
I'm trying to access the VMWare console from firefox using the VMWare plugin. The problem is that it doesn't work on Firefox version 3.6.8. So how can I access the console?
View 2 Replies View RelatedI know this has been discussed many times, but with the current versions, things have changed again. So I ask again.
I am installed:
- Fedora 13, x64
I want to install, config and run:
- VMWare Server 2.0.2 (Community Edition)
I have already upgraded my Fedora 13 system using important commands:
- yum install kernel-headers kernel-devel
- yum install gcc
I have a directory:
/lib/modules/2.6.33.5-124.fc13.x86_64
with some subdirectories, but no include folder there.
vmware-config found the gcc, but cant find the kernel-header files. Also I dont know how to give it the correct path to these kernel-header files.
When I try to run VMware 7.1.4-385536.x86_64 I see this message: "Before you can run VMware, several modules must be compiled and loaded into the running kernel GCC 4.6.0 GNU C Compiler (gcc) version 4.6.0 was not found etc.." I am running: 2.6.40.3-0.fc15.x86_64
View 3 Replies View Relatediam new to linux i installed fedora 10 on windows7 ultimate 64bit after intallation the fedora system doesent boot, but windows7 work properly. i instlled fedora 10 in seperate fee partiotion
View 2 Replies View RelatedActually I found a discussion on this topic. But my problem a bit different from the discussion made over there...The major discussion in that topic is related to the Graphics Issue. But my problem is with the CPU(as my machine says so).... I am posting my screenshot herewith. Please take some time to review it. This would be grateful.
Actually the error says: "This Kernel requires an x86-64 CPU. but only detected i686 CPU. Unable to Boot - please use a kernel appropriate for ur CPU." What does this mean?? My machine has Intel Core 2 Duo t6600 processor. Is Virtualization Playing a role in this issue...??
I just installed VMware server 2.02 on a CentOS 5.4 machine. I tried to run 'vmware': it starts via my web browser (firefox) with xdg-open. Then, firefox displays this:
Connection Interrupted
The connection to the server was reset while the page was loading. The network link was interrupted while negotiating a connection. try again.
Ive tried to install Fedora 14 in a VMware Workstation 7.1.3 and theres the following error: "Running anaconda 14.22, the Fedora system installer, please wait. 23:19:38
The following error was found while parsing the kickstart configuration file:
The following ocurred on line 65 of the kickstart file:
To install VMware Work Station for my Mandriva Linux.
The downloaded file is 'VMware 7.0.1 for Linux'.
'VMware-Workstation-Full-7.0.1-227600.x86_64.bundle'
It has the .bundle at the end.
What is .bundle?
How do I install it?
It may be the case my old processor won't support the product.
AMD Athlon 3500++ is my processor. I bought this computer almost 5 years ago.
I have installed vmware but it is asking for GCC 4.3.2
GNC C Compiler (gcc) Version 4.3.2
how do I download, compile and install it?
I'm looking to install either vmware server, virtualbox or another solution.
Which works the best with fedora 11? I'm interested in USB and performance.
btw, I wasn't sure which forum to put this in
I have Vmware Fusion 2.0.6 (196839) running on my MacBook Pro. I installed Fedora 11 on the fusion and it works fine. The only problem that I am having is that when I try to install vmware tools, by runnning ./vmware-install.pl in the terminal, I am prompted with this message: What is the location of the directory of C header files that match your running kernel? [/usr/src/linux/include]
If I press Enter, the same message pops up. I am fairly new to linux, and I am just setting this up so I can set up a web server on this virtual machine for testing purposes.
the kernel that I have running is:
root@box1 include# uname -r
2.6.30.8-64.fc11.i686.PAE
I've installed F13. Installer has set:
kernel-PAE-2.6.33.3-85.fc13.i686
kernel-headers-2.6.33.6-147.fc13.i686
Installation of VMware Workstation was ok, but at first launch it ask me for path of
kernel-headers-2.6.33.3 Why I have different versions of kernel and kernel-headers? How can I make working VMware? Installation of kernel-headers 2.6.33.3 from package-manager seems impossible.What is the path to specify kernel-headers for VMware?
I am an ex-VMS systems programmer/DBA. I have been given the task of installing Oracle 11gR2 on Linux VMware. I have opened a ticket with Oracle on this, but thought I would see if anyone has already done this.
View 6 Replies View RelatedI'm trying to install VMware Tools for the sake of the SVGA driver alone. For the life of me, I cannot get it to work. I'm able to run ./vmware-install.pl but when it comes to configuring it that's where I've run into trouble. I've been trying and trying and trying and trying all morning to get this to work and I'm getting very frustrated now. It keeps asking me, "What is the location of the directory of C header files that match your running kernel?" I've Googled this and read several threads on the issue, tried every conceivable path I think it might be and it keeps coming back again and again saying "The path "<path>" is not valid. Would you like to change it?" WTF!? Can somebody please tell me what the default location of the C header files is under Fedora 14? Geez Louise I just want to install VMware Tools, for Christ's sake! It shouldn't be this difficult. BTW,
View 3 Replies View RelatedJust Completed Installing a fresh fedora 11 on my Dell Laptop.The Hardware says:
Code:
[root@localhost Download]# uname -arn
Linux localhost.localdomain 2.6.29.4-167.fc11.i686.PAE #1 SMP Wed May 27 17:28:22 EDT 2009 i686 i686 i386 GNU/Linux
You have mail in /var/spool/mail/root
[root@localhost Download]#
I wanted to explore Vmware ESX (Free Download) on my Linux Machine. What Package I need to install on Fedora ?
I've looked through the forums and found that installing openmotif may fix my problem. I tried it but to no avail. Here is my challenge, I'm trying to install Grid Engine on my VMWare fedora installation. I get this dependency error:
Quote:
rpm -i sun-sge-bin-linux24-x64-6.2-5.x86_64.rpm
error: Failed dependencies:
libXm.so.3()(64bit) is needed by sun-sge-bin-linux24-x64-6.2-5.x86_64
libXp.so.6()(64bit) is needed by sun-sge-bin-linux24-x64-6.2-5.x86_64
sun-sge-common = 6.2 is needed by sun-sge-bin-linux24-x64-6.2-5.x86_64
I installed the latest version of openmotif and when I do a search for the two files, there is no libxm.so.3 but libxp.so.6 is there. When I try to install the rpm again I still get the exact same error.
My computer has 512 mb ram..i am using xp..i want to install ubuntu 10.04 within this xp(without dual booting).I heard about virtual machine such as virtual box or vmware player that help us to do the same..so i want to ask which one will be good practice vmware or virtualbox..remember i have only 512 mb ram...
I have also doubt regarding these quereis..
1) can i install software of my choice in ubuntu after installation.
2) can i access internet by ubuntu
3) if i keep some data in ubuntu...will it be kept there also after machine shut down.
Actually i did dual booting xp and ubuntu..i succeed but sometimes my computer get stucked due to low memory..
I installed VMware server on my CentOS 5 machine. I had problems getting that working. Then I installed VMware Workstation. That worked fine. Then I tried using VMware server, but apparently VMware Workstation deleted some of VMware Servers files. So, I uninstalled VMware Workstation. Then I tried to reinstall VMware Server, but rpm complains package VMware-server-2.0.2-203138.x86_64 is already installed
View 3 Replies View RelatedI've been trying to run the vmware-config.pl, but I'm getting this message
Quote:
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? yes
Then I hit enter, and later get this message
Quote:
Unable to build the vmmon module.
I have installed gcc and the kernel-devel tools, and after installing all that I did an update, but still not getting through with the configuration.
I'm new to Fedora 14, vmware player. After getting Fedora up and running in VMware player. The disk size was 2.7 GB. After three hours of working with it, the disk size has bloated to 4.3 GB. I havent added software to account for the near doubling in size. How do I reduce the size back to 2.7GB range or lower. Im new to Fedora and superuser controls. Im removing more software than adding software. Is this a VMWARE problem or Fedora problem?
View 1 Replies View RelatedI am an administrator of a student lab with 20 PCs. I was thinking of a way to protect those machines in the long run with the presence of some students with destructive behaviour. The most suitable solution to install a Linux OS and use virtual machines to load Microsoft OS. This way once the OS fails I can simply replace the VM with a clone that was previously made.
The point is that most students have no experience with Linux, that's why I need to load the Virtual machine automatically at login and in full-screen view so that The startup process ends up in Microsoft OS through the virtual machine (VMWare based) in Linux platform.
update : I'm using Fedora13 Linux distribution. I believe that part of launching the VM in full-screen is more difficult than automatically launching VMWare at startup. Is there some way I can tell VMWare to launch a particular virtual machine in full-screen when it starts on boot?
I was trying to install vmware player 3.0 and it prompt that it require the kernel kernel-2.6.35.6-45.fc14.i686 to be compile before it start.
Quote:
Kernel headers for version 2.6.35.6-45.fc14.i686 were not found. If you
I try following but unable to find.
Code:
Nothing to do
Code:
Code:
Then I try to map to the file, but not working.
I am having trouble getting adobe-flash to properly work on fedora. I have done it before but on a different distribution, and i am migrating to fedora. Here is the output and command that i used for installation of adobe-flash (below). I dont know what else could be causing the problem, note: i restarted firefox after installation accordingly. I tired upload the code and the forums system said
Code:
The text that you have entered is too long (23586 characters). Please shorten it to 10000 characters long.
so i put the information a a .txt file and it is at this download link from 2shared. u have to look for the small words Save file to your PC: click here the other stuff is just junk links to try to get u to get ad funds from clicks, took me a few clicks to find which one actaully downlaods the file. [URl]...
