I have Fedora 14 And MTS MBlaze Mobile BroadBand Connection And its USB MODEM
in order to use usb modem
we use 3 packages
ie
1. usb_modeswitch
2. usb_modeswitch_data
3. wvdial
i have configured wvdial.conf put the req [Dialer Defaults] its behaving perfectly normal it runs the script everything is fine even shows various IP's DNS however when i open Firefox it dose not work.
I have installed Fedora 14 on my laptop And trying to use MTS MBlaze Mobile BroadBand Connection And its a USB MODEM in order to use usb modem I am using use 3 packages ie
1. usb_modeswitch
2. usb_modeswitch_data
3. wvdial
Its connecting when i Dial using wvdial as below
root@Athreyasa Athreyasa]# wvdial
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
[code]....
After connecting i am getting ip as 180.215.44.134 gateway as 10.212.64.1 but if i try to browse the Internet using firefox it says no server found error.I tried to ping [URL] and its not pinging after connecting. nslookup also fails against [URL]however if i ping any of the ip that i am getting while connecting it is pinging Also disabled the firewall and selinux is set to disable just in case to check something else is blocking but no luck
I have installed the 3 packages required for MTS Mblaze 3G Modem to get connected to the internet.
Quote:
1. usb_modeswitch
2. usb_modeswitch-data
3. wvdial
Here is the "/etc/wvdial.conf" file that gets generated when I do the "wvdialconf"
Code:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = yes
[code]...
But now when I open Mozilla or Google Chrome Internet Browsers, I am not able to connect. Moreover, I also tried to ping to [URL] but it is not pinging.Is it related to some Network Manager settings. As when I look at the Network Connection Icon, it shows CROSS i.e. not connected to any network...
I am using Fedora 13. and had bought MTS Mblaze Mobile Broadband device. One installer comes with this device for Fedora, I have installed it.There were some issues while starting this application on fedora. But after seeing some threads for SELinux, it had been solved.Now, when I run this software, a window appears. If i clicked connect, it does show connecting and once connected automatically firefox opens.
But i am not able to access internet. After some time software shows device is in sleep mode due to inactivity. Network connectivity icon on launch panel on fedora shows network is connected.I had similar problem with Mandriva 10..
I have been trying to connect to my University's VPN Server and for some reason vpnc fails. I have configured the vpn settings the same way I did for the past two years. They worked properly on Fedora 12 and 13, but for some reason fails on Fedora 14.
Code:
Jan 6 16:45:20 exodusprime NetworkManager[1269]: <info> Starting VPN service 'vpnc'...
Jan 6 16:45:20 exodusprime NetworkManager[1269]: <info> VPN service 'vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 11731
Jan 6 16:45:20 exodusprime NetworkManager[1269]: <info> VPN service 'vpnc' appeared; activating connections
Jan 6 16:45:21 exodusprime NetworkManager[1269]: <info> VPN plugin state changed: 3
Jan 6 16:45:21 exodusprime NetworkManager[1269]: <info> VPN connection 'Swinburne University VPN' (Connect) reply received.
code....
In all but one place my HP Pavilion laptop running Fedora 14 will work flawlessly to use the Internet for e-mail, ftp, http, etc. In one network there is a wireless router - Cisco/Linksys E3000 - that allows every computer to use the Internet normally for wireless or for wired connections, every computer but mine. If I use Google's Chrome I can access the Internet. I can ping any web site too, but the moment I try to access anything with Firefox 3.6.17 there is a long delay and the standard error page appears. Weather or not I use a wired connection is apparently irrelevant.The Windows 7 computers in the same network are free of this curious problem. Strangely I have noted a problem like this, possibly the same problem, with another network at a coffee shop and they both share the misfortune of using AT&T, which is proud to not support Linux ... for customers of course (it's good enough for themselves I'm sure)
View 3 Replies View RelatedI'm pretty new to Linux, but have had a bit of functional tutoring. i'm triple booting my old Dimension 8400. Have been running with Jackalope and XP for some time now and wanted to install Lynx and get a good handle on it before i completely wipe my other machine (Win7/Jackalope) and install it there.
Installed Lynx from a USB stick and all seems well, it recognises the UBS wireless and all available connections but just sits and spins on the password login and never connects...hmmm. I have tried all possible combinations of rebooting with the USB connected/disconnected/connecting after... to no avail.
The wireless seems to "work out of the box" just as seamlessly as it did for Jackalope, all the steps are similar, it just never connects.
After updating to kernel-2.6.33.6-147.fc13.i686, my email (Thunderbird) fails to connect to the pop-server, and webpages (Firefox) load VERY slow, if at all.When I go back to kernel-2.6.33.3-85.fc13.i686, I have no problem at all.Network chipset: RTL8180
View 2 Replies View Relatedin linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies View RelatedIam using Ubuntu(10.04) Desktop_edition in acer 5745 Laptop(64-Bit) , I got a Blaze USB to it and it is 32 bit (CrossPlatformUI-V1.0.27-SSTL-i386-ubuntu.deb).Iam not able to install tht deviceIs thr anyway that can work on 64 bit or should i buy a new device which supports my architecture
View 1 Replies View RelatedI have a MTS MBlaze USB dongle, with which I can connect to the internet. The question is, how do I set up a ssh connection accessible over the internet so that any one can connect to my PC through that (using valid username/password provided by me of course) ? If not possible, what do I need to make this possible ?
View 3 Replies View RelatedI'm running squeeze/testing. Two or three days ago I became unable to get my mail from pop.gmx.net. A bit of investigation and I found that the error message I was getting was: "could not resolve pop.gmx.net: Name or service not known". Now the funny thing is that I can ping, traceroute, or nslookup the site successfully. Telnet, rlogin and ssh give the same: "could not resolve pop.gmx.net: Name or service not known" error message.
I have tried using the IP address instead of the pop.gmx.net and everything works fine. There is no issue with connecting to pop.gmail.com on the same port. Obviously there is some cache somewhere with a messed up pop.gmx.net. Any idea as to how I can track this down?
Dell mini 10 with ubuntu 10.04/windows xp, connecting to linksys wrt54g. Connected when I was using 9.10, has worked for several months since 10.04 was installed. Still works if I boot XP, but, when booting Ubuntu, router won't accept the passkey which I obtained from my wired computer. I've glanced through a bunch of posts and see several which are close, but no solution. Only cause that I can think of might be a shut down while connected. I say that because it was working and I had no need to change settings.
View 5 Replies View RelatedI am attempting to install Fedora 12 on an HP Pavillion 8766C (Pentium 3 900 mhz with 512 MB ram). I have tried installing from 4 different i386 DVD .iso and 2 Live CD .iso that I burned and the install hangs on each of the discs. I either get a "Anaconda 12.46 Install Exited Abnormally" from the Live CD's or "Boot has failed, sleep forever" from the DVD's. I have also tried the Fedora 12 respin DVD and Ubuntu 9.10 Live CD with similar results. I am about to give on the whole thing at this point! The only success I have had is with the Gparted Live CD.
View 8 Replies View RelatedI finally have my system to where I can connect to proftpd but my uploads fail. I think my problem lies in the upload folder. I do not really understand where to put it. Will someone look at this config file and tell me where to put it and what I need to do to get it working. A basic anonymous configuration, no upload directories.
[code]...
I've tried out many Debian distros and noticed the ones that I try based on Ubuntu, my USB WiFi adapter works fine and I don't really have any issues. When I try one that is based on current Jessie, I have sporadic WiFi issues and just overall instability with regards to connectivity and audio playback. I have tried two distros based on Jessie and had very similar results on both. Is there anything in particular I can try? I've done everything short of installing Debian stable and just pointing to Jessie. I've done that in a VM so I know I can handle it, but wanted to se if there was anything I should be trying first. I just didn't think a distro based directly on Jessie and Jessie backports would be any different from installing base Jessie as far as compatibility is concerned.
Code: Select allCard-2: Realtek RTL8191SU 802.11n WLAN Adapter
driver: r8712u usb-ID: 008-004
IF: wlan0 state: up
Since my update to OpenSuse 11.2 knetworkmanager refuses to connect to WEP enabled networks (worked fine with knetworkmanager 11.1). I am sure that I use the correct password and I tried on 3 different networks. The manager is connecting to open networks and WAP protected networks without problems. I saw on other forums that there were similar problems with previous versions of networkmanager. But I could not find a solution for my problem.
View 9 Replies View RelatedThe nm-applet starts automatically as it should, and also tries to connect to the local, wireless LAN, but always fails its first attempt. If I click the icon and ask nm-applet to connect again, it always succeeds.
The server, running the wireless LAN, never sees the first attempt to connect, so no wonder this attempt fails. But it would be nice to make it succeed!
I have an Atheros AR242x card. It can see my wireless network (WPA2). When i attempt to connect to the network it asks for the WPA2 passphrase. After entering the password it begins connecting but hangs up for about 3 minutes before saying wireless disconnected. The wireless worked for one day on a fresh install (Ubuntu 10.04)and then started doing this.
View 2 Replies View RelatedMy Realtek RTL8187 Wifi fail to connect using WPA security. The authentication window shows up repeatedly every time I try to connect. Please note the password is correct. I searched and haven't found a conclusive solutions as of yet.
View 1 Replies View RelatedHas anyone else experienced a failure to connect to a mobile network. I have root access wireless tether on my Droid X and I can't seem to connect to it. It times out. My buddies windows box can, and his Iphone will as well. I can see the network just fine, just no connection. Tried changing frequencies as well. And restarting both the phone and laptop.
View 3 Replies View RelatedI've recently bought a Canon EOS 550D and would like to make it work in digiKam. Although it is in the list of the supported camera, when I want to import photos from my camera I get stuck because apparently it is not recognized correctly (the import starts, but a message saying "failed to connect to the camera appears".The camera works fine with other softwares like F-Spot and I can browse into it using nautilus.
View 1 Replies View RelatedAnnoying problems I have with Yast2 Software Management?
1. Sometimes when starting Yast2 Software Management it fails to connect to the SW repositories. It happens inevitably (i.e. without exception) at the first attempt after a fresh boot up, and sometimes otherwise. I can only retry or abort, and retrying usually brings no success anyway. Is it perhaps due to a time-out somewhere?
2. If I click on the 'abort' button (see above) or 'cancel' in Yast otherwise, I inevitably (i.e. without exception) get the following type of error message
Code:
** (<unknown>:4220): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
** (<unknown>:4220): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
** (<unknown>:4220): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
** (<unknown>:4220): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
(sometimes only 2 identical lines of error code)
I am running OpenSuse 11.3 with Gnome.
A friend called me today and he explained to me that after his ubuntu install he was unable to connect to a wired Ethernet network. He says it trys to connect using ETH0 and then seemingly fails and disconnects. I have him run a if config and send me a pic. The very odd thing about it is He had a lot 5-8 INET6 address? The laptops is Acer extensa 4420
View 1 Replies View RelatedUbuntu 9.10 comes with rt2870, the driver for my Zonet ZEW2545, and I have had to blacklist rt2800usb in /etc/modprobe.d/blacklist.conf in order for rt2870 to work. My network adapter is able to attempt to connect to my router, but after 10-40 seconds it tells me I am disconnected again. This adapter works fine on windows.
View 1 Replies View RelatedI have a Lenovo S10e netbook running a pretty clean version of 32bit opensuse 11.4, with very few standard patches since I installed it all those moons ago. The problem is that firefox cannot connect to the internet, the odd bit is that skype has no such problems. Are there any network related functions that that typically go screwy that might cause such a problem? The netbook really hasn't been used much for tinkering to have 'accumulated' a problem, but I'm about to give it to the extremely non-technical parents in law and cannot have it misbehaving, especially not as they are in a different country.
View 8 Replies View RelatedDell Studio 1735 w/BCM4312 WEP fails to connect even though I'm using the 10 character HEX key. It connects fine when there's no security on my Linksys WRT310N router. Ubuntu, Windows 7, my Samsung TV and TiVo all connect fine with the 10 character HEX key, but with opensuse 11.4 I can't connect.
Code:
lspci -nnk tells me I've got:
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
Kernel driver in use: wl
[Code]...
I'm trying to find out why the wireless access point at work most of the time won't let me connect to the network. I'm using Ubuntu 10.04 on a DELL vostro 1720. The router model is D-LINK DIR-655. lspci gives me: Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01), and I'm using Broardcom STA drivers.
If I try like 10-20 times to connect I will often finally get connected and once connected everything works fine for the rest of the day. The only router I'm having this problem with is this one. In the log below, the last lines is a connectionattempt that succeeded and all the lines above those are several attempts that failed. It seemes like there is some kind of timeout issue but I'm not sure what and how to fix it.
The syslog for the connection attempts are (I have marked out MAC adesses and public ips with *):
[Code]....
Dell Inspiron 640m laptop, running 10.04. It previously connected via wifi & now fails to connect, although the wireless indicator shows a connection. Connection via ethernet works. Below there's some information that looked like might it be useful to diagnose the problem based on other posts in this forum.
[Code]....
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....