General :: Installation Of NS2.27 (OTCL Make Failed)

Apr 9, 2011

I'm trying to install NS2.27. I have to use this version, so I started the installation. There were some errors, I fixed them one by one. But there is an error that I can't pass it. I really tired of searching the Net for errors. The installation process stops here:

Code:
gcc-4.3 -o otclsh -g -O2 -I. -I/home/nabi/Desktop/ns-allinone-2.27/include -I/home/nabi/Desktop/ns-allinone-2.27/include -I/include otclAppInit.c
-L. -lotcl -L/home/nabi/Desktop/ns-allinone-2.27/lib -ltk8.4 -L/home/nabi/Desktop/ns-allinone-2.27/lib -ltcl8.4 -lXext -lX11 -lnsl -ldl -lm
/tmp/cc8MtFKZ.o: In function `Tcl_AppInit':
/home/nabi/Desktop/ns-allinone-2.27/otcl-1.8/otclAppInit.c:237: undefined reference to `Otcl_Init'
collect2: ld returned 1 exit status
make: *** [otclsh] Error 1
otcl-1.8 make failed! Exiting ...

View 4 Replies


ADVERTISEMENT

Networking :: Connect Otcl And C++?

Jan 10, 2010

i have downloaded ex-linkage.cc and ex-linkage.tcl codes while browsing "ns by example" in google.i followed the steps involved as follows:add the object file in makefile then#make
#ns ex-linkage.tclthese steps i followed but got error as cannot create objects for the class connected

View 1 Replies View Related

Networking :: Connection Between Otcl And C++ Error?

Jan 11, 2010

have downloaded ex-linkage.cc and ex-linkage.tcl codes from the linki followed the steps involved as follows:

add the object file in makefile then
#make
#ns ex-linkage.tcl

[code]...

View 3 Replies View Related

Networking :: Finding A Network Simulator Code In C++ And Perl Not Using Tcl Or Otcl?

Apr 19, 2011

I need to refer a sample code to develop a network simulator using c++/system c as back end and perl scripting asd front end.CAn anyone please refer to me any websites were this kind code is given.I do not want to use this otcl script language so wothout this is any code available just for sample so i wii know were to start and develop my own code.

View 3 Replies View Related

General :: Install NS-2.28 Under 10 Happen "Ns Make Failed"

Dec 15, 2010

I want to install NS2.28 under Fedora 10,using GCC3.4.2(and GCC3.2),occured the follow problem:

Ns make failed!

I also used some other higher version GCC to compile NS-2.28,but there were some other problems.

View 5 Replies View Related

Software :: Failed To Install Chpasswd 2.2-4 I Have ./configure, Make, Make Install?

May 2, 2010

i installed a mail server in RHEL 5 with postfix, dovecot, openwebmail, but i failed to install chpasswd 2.2-4 i have ./configure, make, make install, but nothing happens can any one help me with some documentetion for chpasswd for changing password for mail account

View 5 Replies View Related

Ubuntu :: Installing Emacs 23.1 - Error "makeinfo Is Missing - Cannot Build Manuals Make: *** [info] Error 1 **** Installation Failed"

Feb 6, 2010

I've been trying to install the latest version of Emacs from source but I'm running into a trouble. The commands "./configure" and "make" work just fine. However, when I run "sudo checkinstall" I get a message saying that makeinfo is missing:

Code: makeinfo is missing - cannot build manuals make: *** [info] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. What is Error 1

View 4 Replies View Related

Fedora Installation :: FED13 Kickstart - Client Failed - Loader Failed To Mount

Jun 27, 2010

I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.

Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.

First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:

Code:

Is this a bug or can I modify anything to correct this error? How?

View 3 Replies View Related

Ubuntu :: Failed Configure/make Of Tesseract?

Mar 14, 2011

Seems it failed because I am missing a header file called allheaders.h. What is this and where do I get it?
Here is the output of the configure and make commands:

/var/tmp/tesseract-ocr-read-only$ ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu

[code]....

View 1 Replies View Related

Software :: RPM Source 4.3.3 Make Failed In CentOS

Oct 29, 2010

I'm using CentOS 5.5 and trying to compile RPM 4.3.3, this is required for our target board specific needs. When I did compile RPM 4.3.3's source I got the following error. How to rectify this one?

error: selinux/selinux.h: No Such File or directory

What I have to install for selinux.h?

View 2 Replies View Related

General :: Make Error - Make[2]: *** No Rule To Make Target

Oct 7, 2010

I am getting an error as below.

How do I resolve the error: make[2]: *** No rule to make target `', needed by `mpg123'.

How can I resolve this error.

View 4 Replies View Related

Ubuntu :: Failed To Download Repository Information / Make It Possible?

Dec 14, 2010

Since upgrading to 10.10 , there has been problems with the update manager.

Iv looked around but cannot find a good conclusion. code...

Ok for some reason my INTERNET is set to etho2 instead of etho, might this be the prob? , YES I do have INTERNET/connection.

if so how do i change it to default iv tryed etho but it just keeps going back.

View 2 Replies View Related

General :: Slackware 13.1 Gnome Installation Failed?

Jul 29, 2011

Then by issuing lynx --source url | bash command as root i could install gnome.There was no error during installation.Then after reboot i try to log to gnome by issuing gdm command.It ask my user name and password.
Then there was a light blue colour screen and it become bright green colour .There was no error massages.I try several times and got the same result.I am using commercial nvidia driver .What could be the error.What should i do next.

View 2 Replies View Related

Slackware :: Src2pkg Running Make Install Has Failed With Error: 1

Mar 10, 2010

when i upgraded to slackware-current few days ago i tried to create packages with src2pkg and i get this:

Checking for Makefile rule: 'install' Okay
Checking support for DESTDIR (or similar) - Found DESTDIR
Installing using DESTDIR - Using:
make DESTDIR=/tmp/xf86-video-intel-2.10.901-i486-1 install
Notice - Possible error running 'make install'
FATAL! Running make install has failed with error: 1
Try using INSTALL_LINE 'make -i install' Exiting...

is it because of i have slackware 32bits i installed src2pkg successfully on slackware 13 but on slackware-current if i remove it and do src2pkg --setup i get error something like cannot live without it every time. when wanting to create src2pkg-helpers.

but i want to know what im doing wrong ?

before i created packages successfully. i execute src2pkg as root

View 14 Replies View Related

General :: Php-oci8 Installation / Error: Failed Dependencies?

Dec 13, 2010

i am having a issue installing php-oci8. I am using a cesntos 5.5 OS

when i try installing php-oci8 i get this error
[root@web8 tmp]# rpm -ivh php-oci8-5.2.14-1.el5.remi.x86_64.rpm
warning: php-oci8-5.2.14-1.el5.remi.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 00f97f56
error: Failed dependencies:
php-common = 5.2.14-1.el5.remi is needed by php-oci8-5.2.14-1.el5.remi.x86_64

so then i checked whether i have php-common 5.2.14 installed it yielded this result

[root@web8 tmp]# rpm -qa php-common
php-common-5.2.14-jason.1

i dont understand why php-oci is not getting installed even though php-common is present.

View 1 Replies View Related

General :: TSM Backup Client - Installation - Error: Failed Dependencies

May 17, 2010

I'm currently trying to install TSM backup client 5.5.2 and getting dependency errors when i do the following rpm -i TIVsm-API.i386.rpm

[Code]...

linux version : Linux version 2.4.9-e.27smp (gcc version 2.96 20000731 (Red Hat Linux 7.2 2.96-118.7.2))

View 1 Replies View Related

Ubuntu :: Error With "make" And "make Install" ".ko Failed To Build"

Aug 9, 2010

I have been trying to install a new driver for my wireless USB adapter, and I've been getting some "make" command problems and error messages. Specifically, I am installing the RaLink rt2570 USB Enhanced Driver to work with my Linksys WUSB100 adapter (chipset RaLink Rt2870).

I downloaded the package and used the readme from inside the package here:[url]

Here's what I have done directly after download to my desktop:

Code:

View 7 Replies View Related

General :: Debian 6.0.1a Installation Failed / Grub Tried To Read The CD But Than Started Ubuntu OS?

Mar 27, 2011

I'am using Ubuntu 10.10, and wish to install a Debian OS.I downloaded the file "debian-6.0.1a-amd64-netinst.iso.(My motherboard is a 945CG-F7 with INTEL PENTIUM DUAL CPU E2160)I recorded the file on CD as "iso" (following instructions from Internet).Grub tried to read the CD but than started Ubuntu OS.

View 2 Replies View Related

General :: Ns-2 Installation - Tcl8.3.2 Configuration Failed! Exiting - Tcl Is Not Part Of The Ns Project

Oct 18, 2010

I have tried to install ns-allinone-2.29.....i followed the process given on the net....everything got installed properly except tcl and i got the following message tcl8.3.2 configuration failed! Exiting.... Tcl is not part of the ns project

View 3 Replies View Related

General :: Kickstart Installation Fails With Error Failed To Read Rpm Header?

Dec 16, 2010

I am running into a strange problem where kickstart installation fails with Error failed to read Rpm header, This happens when installation starts formatting of disk is also completed some of the rpms installed and then suddenly installer stalls with failed to read rpm header.

I have kept kickstart and install media on same host. I have changed the install media from http/nfs/ftp just to check is there any problem with the media but no luck.

However same installation with the same kickstart file works fine when both install media and ks file is kept on another linux host.

I am using RHEL 4 ,I do checked /var/log/messages it does not give any information on the failure and this started happening recently till that i was using the same server for my linux deployment.

Note: pxe setup, boot server ,install media and ks file all are in same server.

View 2 Replies View Related

General :: Fedora15 Installation Failed On Laptop With Envida GT325 Graphic Card

Jun 15, 2011

My notebook can't install Fedora15 because of the graphic card, it said the card's problem or the driver's, i can't tell.

View 5 Replies View Related

Programming :: Bash - Automatically Build A Set Of Packages And Redirect Output Into Logs - Failed Make Should Return A Non-zero Value

Jun 27, 2011

I have a set of bash scripts that I'm running that automatically build a set of packages for me and redirect their output into logs. Basically, I have a bunch of lines that are something like this: ${CONFIGURE_DIR}/configure &> ${LOG_DIR}/log or cd ${CONFIGURE_DIR} && make &> ${LOG_DIR}/log, etc.

This is supposed to make the entire process silent. However, sometimes with some packages some output leaks to my console (either stdout or stderr). I'm thinking that maybe the configure scripts/make are executing commands within new shell instances that don't inherit my redirect, or something to that effect.

Another reason for thinking this is that in another part of my script I detect errors when running make by testing with "if [ $? -ne 0 ]", and if the redirect leaks to my console and also the leaked output indicates that the build failed ("make: Error" and so on), then my $? test fails (i.e., it thinks that $? == 0, whereas a failed make should return a non-zero value). It's as if my original script can't "see" the results from child commands executed from later scripts.

View 1 Replies View Related

Ubuntu Installation :: Log On Failed After Upgrade/install "authentication Failed"

May 20, 2010

I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.

So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.

So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...

So, remember i'm trying to talk a novice through all this... any thoughts!?!

If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?

View 1 Replies View Related

General :: Ubuntu 9.10 - Move Existing Installation To Usb-flash And Make It Bootable?

Apr 20, 2010

Is there any possibility to move my already installed ubuntu linux to the usb flash and make it bootable. So that it would boot on the other machine?I have an installed ubuntu karmic linux installed on my machine. I want to make it portable, to move it with all installed packages and tuned software to a usb-flash drive.

View 2 Replies View Related

General :: 'make Menuconfig' To Make These Files Modules Rather Than Compiled Elements?

Feb 25, 2011

I need to modify fs/open.c and fs/read_write.c to make my modifications. I cannot find any options in 'make menuconfig' to make these files modules rather than compiled elements. I'm thinking these cannot be modules because the file system won't work without open.c and read_write.c. Is this correct - I cannot compile fs/open.c and fs/read_write.c as modules, only as compiled elements? Or, is there some way for a module to overwrite these routines when the module is installed and re-enable the routines when the module is removed?

View 3 Replies View Related

General :: Difference Between Make And Make BzImage Commands?

Feb 23, 2010

difference between make and make bzImage commands as both are used to build source code.

View 1 Replies View Related

Debian :: Way To Make Su Repeat Authentication Rather Then Just Returning Authentication Failed

Apr 1, 2016

If I am running a script, let's say a install script. Is there a way to make Su repeat authentication rather then just returning "Authentication failed" and continuing the script?

View 3 Replies View Related

CentOS 5 :: Kernel Panic - Getting This"failed To Make Kdump Initrd" Messages At Startup."?

Oct 12, 2009

I've had a Centos 5.3 zimbra mailserver set up for about 3 months now.Every 7-10 days or so, the system will do a kernel panic and I've been putting off its resolution due to other matters.I'm now ready to look into it but I have two issues :

1) No logs.

So far, I've manually rebooted when a kernel panic occured and could look at the panic printout and write down relevant info. But since I wanted more info than I had written down, I went hunting in the logs for the kernel panic event (one happened earlier today) but, to my surprise, I noticed the system doesn't log the kernel panic at all. Kdump is currently disabled as I'd like to keep all available memory available to the system but I was under the impression it would log the kernel panic message regardless but would simply leave out more advanced diagnostic information.How would I make sure the kernel panic is logged so I can have more info about it ?

2) The actual panic.Here's a snippet of what's appearing when the kernel panics :

EIP c0467136 page_remove_rmap+0x66/0xc0 SS:ESP 0068:c3ca6ddc <0> Kernel panic - not syncing: Fatal Exception

I've also seen f793bee4 instead of the highlighted part above but everything else is always the same from the times I've seen (as I haven't always had the chance to be around when a panic occured).I'm looking further into it at this point but early research seem to indicate this could be a memory issue. I'll run memtest next weekend to check that out (since I don't want to take the system offline for any length of time during office hours) but people here might have other theories based on what I've put up so far. The system has all of the latest patches and updates and is running only what I need as far as software goes (zimbra server + prerequisites, x + GNOME (not loaded on startup), firefox and vnc for windows RDP access). My system also uses a software RAID1 array (boot = md0 and / = md2 with swap files not being mirrored as there's no need to).

PS : In order to further troublehsoot by myself before posting here, I've tried to enable kdump to see if kdump is the culprit for the missing logs but I'm also having an issue with it. I'm getting a "No kdump initial ramdisk found" and "mkdumprd: failed to make kdump initrd" messages at startup. I'm thinking this might be because of my raid array ? I've found an old bug report regarding one of those error messages on centos 5.2 but it was supposedly fixed in the 30 version by RH and I'm using the latest one (56).

View 5 Replies View Related

Ubuntu Installation :: Cannot Update - Error 'installation Or Removal Of A Software Package Failed'

Dec 2, 2010

I i cannot install updates (181). I'm using 10.10, Heres is the error i get: The installation or removal of a software package failed.

[code]...

View 2 Replies View Related

Debian Installation :: Installation Failed On Mobo Gigabyte G41M-ES2H?

Aug 1, 2010

explain the following issue I have with Debian IA 64:I tried on a PC (Mobo Gigabyte G41M-ES2H, core 2 duo, 4 GB RAM DDR2) the live CD of Debian Lenny IA64 and everything worked just fine, which was a very good thing because none of all other major ia64/i386 distros of Linux (Mandrake, ubuntu, fedora) did so. In a nutshell it seems that the IGP G41 chipset is the cause of these setup failure (Everything is OK when using a PCI-e graphic card that I need in another computer)rd as someone (viewtopic.php?=17&t=49186&p=282839&hilit=G41M+ES2H#p282839) successfully installed Lenny on a very similar mobo. To go to the point what I do not understand is when I launch the iso Cd to now install the same version of Debian, everything freezes at the very beginning of the boot and the screen goes blank.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved