General :: Ifconfig Eth1 Down Unsetting And Setting The Running Flag On The Other Side?
May 29, 2011
PC1 and PC2 are linux pc's with linux 2.4 (or) 2.6 kernel installed on it.Observations are done on both 2.4 kernel and 2.6 kernel Problem explination:
1)PC1 "ifconfig eth1 down" on linux shell.
2)Check the "ifconfig eth1" on PC2
3) The running flags are unset first(disappear)and set(Re-appear) on the eth1 interface on PC2.
4) unset and set toggling happens with in short period of time about 1 or 2 secs.
This is clearly observed in linux 2.4 kernel with some time delay for the toggling, but 2.6 kernel this will happen every quickly..
[Code]..
View 3 Replies
ADVERTISEMENT
Jan 31, 2010
It is. I think this might be the reason why my $wireless objects don't work in Conky?
View 4 Replies
View Related
May 28, 2011
The 2.6.37 kernel has proved disappointing for me on one lap top at least. The KMS disregards any boot-up parameters and bringing X on seems to be a big struggle for the lap top. The logon screen for run level 3 appears for several seconds before the lap top starts up the GUI logon. Worst of all, applications seem to take twice as long as they used to to get started.
No doubt there are some tweeks I could do but the main problem seems to be that the lap top is not powerful enough to cope with the KMS. I am even considering downgrading back to Slackware 13.1 (which this laptop had no trouble coping with).
Before doing this I thought I would try the 2.6.38.4 kernel and see if this overcame any problems. An initial trial looked promising but evidently there is more to using a new kernel than unpacking the huge 2.6.38 kernel and re-running lilo. I was unable to get past the login screen because many of the 2.6.38 directories don't exist.
Can I set up a laptop so that I can choose which kernel I want to use at boot-up time or do I have to make a total commitment with one kernel only?
View 2 Replies
View Related
Jan 28, 2010
have been trying to setup a dual boot system with ubuntu and XP running side by side on my Thinkpad T41.tried it a few times and always causes the same problem. i have 40 gig HDD, on which i create a 13 gig NTFS partition and leave the rest as free space. then install XP on the NTFS partition. no problems.
then i boot from the ubuntu disk (9.10 Karmic) and install using the "use free space" option at the partition section. ubuntu installs ok, and boots fine from GRUB 2.0. BUT when i select the XP option from GRUB's list, it starts to boot XP, i get the standard XP loading screen for three seconds and then it crashes to a blue screen critical problem, and restarts the system. when i then boot from the xp cd and go into recovery mode CHKDSK will not recognise the disk, and DISKPART shows one HDD at 35 gig which it cannot access.
this means i cant run FIXBOOT and get my xp install running again. every time i do this process it produces the same problem. tried at first with xp installed on whole HDD, and reducing the xp partition size. killed XP. then tried ubuntu first and xp second - but this caused the same inaccessible disk problem - xp would not recognise the partitions and would not install. so i slipstreamed my XP install disk to SP2 hoping this would make it recognise the partitions, but no luck there. so had to format all and repartition the 13 gig NTFS for xp. installed xp again without difficulty but ubuntu install killed my xp in the same way.
View 9 Replies
View Related
Jul 7, 2010
i have encounter strange situation i have set all my network configuration via /etc/sysconfig/network-scripts/ifcfg-eth0 ,eth0.2 ,eth1 etc ....i have used only once Gnome network manage settings to add routing since then all my network config change although all files mention above showing the same config i have set initially and same for Gnome network Manager.
View 3 Replies
View Related
Jan 8, 2011
How would I use a unix grep regular expression to find any two capital letters side by side and how would I find an expected comma in an expected spot?
View 2 Replies
View Related
May 10, 2010
I have two (or more) video files that I want to play side by side. I could do that simply by opening them in two seperate windows, but that would also seperate all the controls (play/pause/forward/...). I want to play them in a synchronized fashion so that pause/forwarding/... works on both videos simultaneously so that they always stay at the same timecode and they don't go out of sync. How would I accomplish that in Linux?
This is needed for viewing only, so compositing them into a new video file first should be avoided if possible, but if there isn't an easy way to do that, I welcome answers doing it with composition as well.
View 1 Replies
View Related
Aug 8, 2010
I am having a text file as below ;
line 1 : 123 rama 21
line 2 : dropped INDIA Remarks
i want out put as below :
line 1 line 2 ie
123 rama 21 dropped INDIA Remarks ( in one line)
which command i can use ?
View 12 Replies
View Related
Mar 4, 2011
I need to setup two ethernets in my Centos box. OK no problem both ethernet and 1 virtual works perfect. eth0, eth1 and eth1:0. I'm trying to set up diferent routes for eth0 and eth1/eth1:0 I need eth0 has a 192.168.1.1 gateway and eth1/eth1:0 192.168.1.100 gateway.I think I've tried almost every thing but always get one gateway for all the eth.These are my config..
/sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:XX:XX:XX:XX:XX
inet addr:192.168.1.168 Bcast:192.168.1.255 Mask:255.255.255.0[code]......
View 7 Replies
View Related
Jan 7, 2011
PDF 1 has of page 1,3,5,7,...
PDF 2 has of page 2,4,6,..
=
target : 1,2,3,4...
With convert or things in the repositories of ubuntu would be perfect
View 5 Replies
View Related
Dec 1, 2010
i have installed ns2.33 and added mobiwan , i tried to run tcl script after modifyng simple tcl which i have got along mobiwan patch, but the problem is after creating some nodes and setting their positions in the tcl, according to my topology, i tried to run , but the command i have included in tcl , which sets the positions for mobile nodes, has no effect , which means that the positions of the mobile nodes is already fixed , trough tcl i am not able to change , and also each time when i run nam , different positions mobile nodes taking, and also the mobile node is not moving , even if i have given mobility to it, at different time , i have given different destinations.this is part of tcl in which i have set positions mobile node.
Code:
set cn_ [create-router 0.0.0]
set router_ [create-router 1.0.0]
set bs1_ [create-base-station 1.1.0 1.0.0 200 200 0]
set bs2_ [create-base-station 1.2.0 1.1.0 200 600 0]
set bs3_ [create-base-station 1.3.0 1.2.0 600 200 0]
code....
View 4 Replies
View Related
Jul 30, 2010
I try to generate a server client code. What i try to do is sending video streams from eth0 and eth1 to the other server programs' eth0 and eth1. In order to do that, i decided to use SO_BINDTODEVICE. But the code is not working. Am i misunderstood the usage of SO_BINDTODEVICE.
1-Defining two ports
2-Defining two sockets
3-Assigning host ips on them
[code]....
View 3 Replies
View Related
Jul 19, 2010
What does the mkdir -p flag do? i.e the '-p' part?
View 1 Replies
View Related
Oct 15, 2010
What does the -i flag mean in rm i my_file?
View 2 Replies
View Related
Jan 24, 2011
In another forum (I each day visit a lot of them) a user was stating that you need to set a boot flag to make the root partition bootable, if you create partitions with GParted in order to install a Linux with GRUB2. Another was suggesting that, if you install Linux with GRUB2, the installer automatically sets a boot flag to the root partition to make it bootable (I don't remember the names). I neither believe the first nor the second thesis and I'm hoping that in this excellent forum some Gurus not only are saying I'm right but also give a comprehensive answer.
View 2 Replies
View Related
May 26, 2010
I just bought an Eee Box with Red Flag Linux Desktop 5.0NE. My intention was to use it as a backup server at home to backup files and photos, etc.
How to I get to a graphical user interface so I can start to know what I'm doing?
When I switch on the machine, it says:
Red Flag Desktop 5.0NE
Kernel 2.6.21.0-22 on an i686
localhost login:
View 1 Replies
View Related
Sep 24, 2010
Will I be able to have a partition on my computer to run Windows Vista and Ubuntu side-by-side?
View 2 Replies
View Related
Dec 18, 2010
If a file gets created in the user's Desktop folder, or if a drive is added to the machine and a Desktop icon is correspondingly created, they will by default appear on the left side of the desktop (unless, in the case of the latter, the specific drive has been created before and dragged to the right side, in which case GNOME will remember to put it in the same place).
Because I have a terminal window embedded onto my Desktop in the top left corner and occupying most of the screen), I keep my icons on the right side of the Desktop instead of the left (Mac style) - Any time I add a new drive or a file is sent to the Desktop, however, I have to kill the terminal window to be able to click on the icon, then drag it back to the right side, then restart the terminal.
Is there any way to tweak GNOME so that these icons are added from the top right corner and down instead of from the top left, automatically?
View 5 Replies
View Related
Jun 23, 2011
How could I see stereoscopic side by side picture film using smplayer with vdpau on normal LED monitor?
View 1 Replies
View Related
Jun 10, 2010
where I can get a application to view spreadsheet files side by side to see differences or sync ?
View 3 Replies
View Related
Sep 23, 2010
I'm looking for a software to compare two documents (for example .odt) side by side or highlighted in graphical way. I want to do the same as Word 2010 Compare Documents (see this: Microsoft Word 2010: View Two Documents Side By Side). I found in OpenOffice something a bit similar that, see in <Edit> -->> <Compare documents>, but it's not a good visual presentation. I'm looking for a software who give me the possibility to see the differences between two documents side by side, or highlighted.
View 3 Replies
View Related
Jun 5, 2011
I'm wondering how much of my currently installed packages I can transfer to a new system...I have a HDD split in two. I have 10.4 on one half (/dev/sda6) - my working system for the last year or so since my last upgrade - and I have just installed 11.04 on the other half (/dev/sda. I wanted to check out the new version rather than upgrading. note I have my home folder and all stored data on other drives (zfs mirrored disks) - the boot disk is mostly OS related... I can overwrite /dev/sda8 with impunity as long as /dev/sda6 is intact....
What I want to do is capture the wide variety of packages I have installed on the old version and install them onto the new system - without using the dist-upgrade mechanism... I've had it fail too many times leaving me with a complete rebuild being required... is this (partially) possible or have too many core packages changed? I was especially thinking of something like [URL]
to obtain the list:
dpkg --get-selections | awk �$2 ~ /^install$/ {print $1}� > installedpackages
to reinstall:
cat installedpackages | xargs sudo aptitude install -y
another path would be to clone the entire /dev/sda6 onto /dev/sda8, boot into the duplicate and dist-upgrade that
View 1 Replies
View Related
Jan 10, 2011
I'm using NFS and I have the following problem. After ~100 days, the client and server lose connection, but the client doesn't know about this, it gives no error. The problem is that the changes on the server side aren't visible on the client side.
The nfs options are: "noatime, nolock, hard, udp, notcp, nosuid, nodev, rsize=8192, wsize=8192, actimeo=60"
The kernel version is: 2.6.16.27 built with 250 Hz. Is this an already corrected issue in a kernel version? Or are my options wrong?
View 1 Replies
View Related
Mar 25, 2011
I found that this tests if a give filename is a directory or not:
Code:
-d "$FILENAME"
But what test for not a directory? I tried
Code:
-D "$FILENAME"
But this doesnt work?
View 1 Replies
View Related
Jul 20, 2010
It used to be a sysadmin/yast setting wherein you configured the display.It is now done under "personal settings"-->"display" meaning ordinary users can set their own preferences. That's really nice and all, but I'd rather it be sysadmin-only than have to go through several minutes of futzing around with it every blasted time I login. So, how can I make side-by-side permanent either for myself or for all the people who use my system (just me)? Thank you.
This module is only for configuring systems with a single desktop spread across multiple monitors. You do not appear to have this configuration.Since I obviously do and since I can get the desktops to spread across the monitors (after futzing for several minutes).
View 2 Replies
View Related
Mar 31, 2010
I did a search but for this topic and I thought it would be discussed quite a bit, did not get any results. Maybe I did not use the correct words? Anyhow, I am running Kubuntu 9.04 and wish to switch to Ubuntu Karmic 9.10. I do still want to keep Kubuntu 9.04 as a boot up option temporarily in case I have major issues with Ubuntu. Ill also need to know how to get rid of Kubuntu after Im sure all is well with Ubuntu. Finally, there are a ton of boot options (different kernels Ive upgraded to) in Grub when Kubuntu boots up. How do I get rid of those? I also have a Windows XP partition that I boot into occasionally.
View 4 Replies
View Related
Aug 10, 2010
Just installed Ubuntu 10.04 on my home laptop after testing it (and loving it) on my work desktop just this morning. First time Ubuntu user and looking to be a long one, too.Anyways, I used the "install side-by-side" on both machines, but my laptop, with Vista, has a weird side effect. At the boot screen, I chose Windows Vista and it booted the recovery tool (I forgot the exact name). I was worried at first, but when I chose the actual Windows Recovery option below it to attempt to fix it, it booted Vista. So it seems in the process of partitioning the HDD for Ubuntu I somehow switched what each partition boots. Is there a way to correct this?
View 4 Replies
View Related
Nov 17, 2009
I would like to know how I can view two windows side by side on the same desktop (ex. have two openoffice files side by side) and be able to work on both of them at the same time rather than having to click back and forth from window to window. I have seen this done on people that have MAC computers is there anyway to do this on Ubuntu?
View 8 Replies
View Related
Apr 15, 2010
I have a created an ext3 partition and when i tried to set is hidden flag, there seems no effect. how to set the hidden flag of an ext3 partition?
View 1 Replies
View Related
Jun 21, 2011
I'm trying to create a shell script to take an argument and use it to name a terminal tab. So if the script's name is tabnm, tabnm "test" should rename the current tab "test"
This is my code:
#!/bin/sh
echo -ne "e]1;$1a"
but when i run it I get this output:
robin@icarus $ sh tabnm.sh test
-ne e]1;test
If I just run echo -ne "e]1;Testa" straight in the shell, the tab is renamed.
View 2 Replies
View Related
