For example I have "/some/dir" which contains user's files and directories. I want to check if there are any files or directories of root. I guess I should use "find" command but what's the full command to find it out?
View 2 Repliessuppose in my current directory, I have 50 sub-directories. Now, I am interested only in about 20 of those sub-directories (whose names match a pattern). I would like to recursively list the contents of these 20 sub-directories. How do I do that ? I would like to do this in Solaris 10 and Linux(RHEL 5.x).
View 3 Replies View RelatedBeing a system administrator i came across a statement as "Excluding temporary directories /tmp and /var/tmp, no root owned files should be in world writable directories"While the above statement may look straight forward but how would i check if there are any such directories in the distribution?
View 14 Replies View RelatedI am looking for Windows Search equivalent looking for file name patterns (not file contents but file names)....
I am aware of "globbing" and wildcard recursive search functionality in ls but I am still not capable of finding files under directories.
for example: I want to find all files starting with a string lsnr* under root directory / and any sub-directories.....
ie I want to look for files like lsnr*.* anywhere under / and any sub-directories under / such as /dir1/dir2/dir4 and dir1/other/dir/someotherdir/sub-dir etc.
so if I have /dir1/lsnrcontrol and also have /dir1/dir/2/dir3/lsnr-tinit.dat then I want to list the files names etc.
how to do this using ls -R and wildcards.
I need a way to find all the files not owned by root:root on the commandline. How can this be done?
View 2 Replies View RelatedNow I'm porting a WIFI driver to my platform, MIPS little endian, Linux-2.6.18, uClibc environment for STB. And I'm experiencing some strange symptom. As you know, there are some kind of include files that system provides such like GCC-provided(usually in /usr/include), LIBC-includes(/usr/include), Linux-includes(${LINUX}/include/linux), ASM-includes(${LINUX}/include/asm) and so on, and there are many files resides different directories as the same name (e.g. time.h, types.h, limits.h ...) and many of them has
different contents.
I'm confusing because that some include files are read from unexpected directories.
The command line is like following. $ cross-gcc -o Target -I$(GCC_INC) -I$(LIB_INC) -I$(appl_inc) -isystem $(LINUX)/include -isystem $(LINUX)/include/linux Source.c
And some symbol means:
GCC_INC: directory for GCC include files.
LIB_INC: directory for LIBC include files.
LINUX: Linux kernel directory.
[code]....
As shown above, some include files are read from unexpected directory. This causes some severe compile errors. I've verified these by adding '-E' to the command line. How can I order GCC to read files from where I'm expect?
I have installed the files from Betavine - SuSE Linux Drivers and installed it by clicking the rpms and installing now the error is this- Vodafone Mobile Connect needs the following files and dirs with some specific permissions in order to work properly: /etc/ppp/chap-secrets should have 0660 mode, found 0666 /etc/ppp/peers should be readable and writtable by group root user Rob should be a member of group root
View 3 Replies View Relatedi used opensuse 11.1 ...there is option for root user to create password for root...but for ubuntu i did not find anything like that...so how can i create root password....or how can i use root
View 1 Replies View RelatedI'm trying to use the dirs command with the +N option. The manual says: dirs [-clpv] [+n] [-n]Without options, displays the list of currently remembered directories. The default display is on a single line with directory names separated by spaces. Direc- tories are added to the list with the pushd command; the popd command removes entries from the list. +n Displays the nth entry counting from the left of the list shown by dirs when invoked without options, starting with zero.
dirs -v shows:
0 /dir1/
1 /dir2/
2 /dir3/
However, dir +n 1, dir +N 1, dir -v +n 1, dir -v +N 1 all give:
[Code]...
I have to format 4 years worth of awstats data "static" for a client and then move it to their new server.I don't want to run the commend to do this 48 times. If possible I would like to use a bash script that uses the folders in a directory so the script knows which year-month to do this for me and which folder to place the output in.
View 5 Replies View RelatedTrying to write a shell script called make to read a file called dirs with the following in it
programs
scripts
documents
Read file line by line and make the directories in the current directory when you type ./make dirs if no file is given then program should print usage:
make dirs filename
I am trying to do a find/grep/wc command to find matching files, print the filename and then the word count of a specific pattern per file. Here is my best (non-working) attempt so far:
wc `find . ( -name "*.as" -o -name "*.mxml" ) -exec grep -H HeightResizableList {}` ;
Is there a way to specify to find that I only want text files (and not binary files)? Grep has an option to exclude binary files, so I thought find probably has a similar feature, but I've been unable to find it.
View 2 Replies View RelatedI know how to search for normal files but can you let me know " How to search for 5 setuid files on the system. Also explain, for each file, why setuid mechanism is necessary for the command to function properly"
View 1 Replies View RelatedIf I am logged in as root in a linux system and I run command rm -rf on / folder, should it remove all the files? also the kernel?
View 4 Replies View RelatedI had used test desk program to restore my files ,the files that recovered was saved in home folderthe problem is that these files are become root permission only ,so i cantcopy , move theme
View 3 Replies View RelatedWhen i installed ubuntu. I made a seperate partition so that i could copy an ISO image onto it of an up-to-date version of ubuntu. I wanted to then boot the ISO up so i could install the version that way.I've already tried doing it through the update manager but it'll download, almost be done with installing and it freezes on me. so i figured this would be easier. However i do not know how to gain access to the other partition to copy the ISO image.
View 6 Replies View RelatedBeing relatively new both to Linux and this forum, i am sorry if i make a post that already is, evn though i couldn`t find it.My problem is i can`t move downloaded files over to root filesystem, i have downloaded and unpacked them to files. to change it`s looks and downloaded a skin, i open root, go to usr---> amsn ---> share --> skins, now i am to copy the file of the skin over to the root directory, butI also tried alt+f2, writing sudo conqueror, as an advice i got, but there was noe difference.
View 14 Replies View RelatedMy server unable to boot up and got the the message "could not find filesystem /dev/root" after adding 1Tb of storage space from Storage Area Network (SAN) to the root partition. how to restore my backup folder or how to restore the server to it original state.
View 1 Replies View RelatedI know I can do find . -type f, but that includes binary file and I couldn't find a way to exclude them with find
View 4 Replies View RelatedSay I need to do: find / -name somefile.txt
And say root partition / is mounted on /dev/sda5; however, let's say I also have 250GB partitions (/dev/sda6, /dev/sda7) mounted in /media - AND another location that I cannot currently remember. Say, also, that I know the file I'm looking for is on /dev/sda5.
Obviously, the above command will also descend in /media and that other directory which represent the big partitions, wasting time in looking for the file in the wrong place.
Is there a way to instruct find (or other command) to search only / on /dev/sda5, and NOT to descend to directories if they are on different partitions ?
First time trying anything like this. I'm running a Abit NF7 with a silicon image 3112 that's support was broken in 2.6.35. I get a kernel panic when VFS can't find the root partition, I can't remember the exact line (can't log it, root isn't mounted yet) but it says something like sata1: link down (sstatus 0 scontrol 0). I think there might be a more telling error message before, but it flies by too fast to see or capture with my camera video recorder.
There's a patch that reverts back to when there was a delay in /drivers/ata/libata-sff.c in the function ata_sff_tf_load, by calling ata_wait_idle(ap) which fixes the issue for some people but not my system. I don't know anything about what I'm doing, but I thought I'd go through and add printk's in each function in sata_sil and see how far the device was initialized. I did this but they all happen early in the boot that flies by. Is there any way to add a pause like the "more" command? [URL]
Is there a non-root shell command that can tell me if a user's account is disabled or not? note that there is a fine distinction between LOCKING and DISABLED:
LOCKING is where you prepend ! or * or !! to the password field of the /etc/passwd file. On Linux systems that shadow the passwords, this marker flag may be placed in /etc/shadow instead of /etc/passwd. Password locking can be done (at a shell prompt) via password -l username (as root) to lock the account of username, and the use of the option -u will unlock it.
DISABLING an account is done by setting the expiration time of the user account to some point in the past. This can be done with chage -E 0 username, which sets the expiration date to 0 days after the Unix epoch. Setting it to -1 will disable the use of the expiration date.
The effect of locking to to prevent the login process from using a supplied password to hash correctly against the saved hash (by virtue of the fact that the pre-pended marker character(s) are not valid output character(s) for the hash, thus no possible input can ever be used to generate a hash that would match it). The effect of disabling is to prevent any process from using an account because the expiration date of the account has already passed.For my situation, the use of locking is not sufficient because a user might still be able to login, e.g. using ssh authentication tokens, and processes under that user can still spawn other processes. Thus, we have accounts that are enabled or disabled, not just locked. We already know how to disable and enable the account - it requires root access and the use of chage, as shown above.To repeat my question: is there a shell command which can be run without root privileges which can output the status of this account expiration info for a given user? this is intended for use on a Red Hat Enterprise 5.4 system.The output is being returned to a java process which can then parse the output as needed, or make use of the return code.
I was going through a server hardening manual.t some interval it was mentioned that there should not be any alias for commands defined in roots startup files .
View 1 Replies View Relatedwhat if the root user by mistakenly stops/starts any service and tried to remove those traces from the log files and save those log files. Then how can we ensure that our log file is trusted. Is there any way where even the root(superuser) also cant edit/modify the contents of the /var/log/* files.
View 2 Replies View RelatedHow is it possible that I get perm denied when I'm copying files in console.
View 1 Replies View Relatedi tried to run lame install. on debian lenny amd64.
sudo sh /home/levi/Desktop/lame-3.98.4/install.sh
it returned errors, and i gave up on that. but it has placed a bunch of files and directories in my home folder(not in Desktop)which are owned by root. how may i delete them?
folders are
ACM
debian
Dll
doc
[Code].....
mv: cannot move ..... to ... No such file or directory. which i at least FEEL is certainly not the case.
I have a lot of mp3 files without any ID3 tag information. This is very annoying, because my iPod does not show them correctly. My Banshee shows them as "unknown artist" and the title. I would like to find them all in a bunch to batch update them.
View 2 Replies View RelatedWe have a huge amount of duplicate files in a folder and I would like some pointers on to writing a bash script to create a list of the duplicate files. I've seen examples that check for the md5 sum of files... but I dont need that, the file name is enough.
View 4 Replies View RelatedSay someone logs into a Centos Linux box and SCPs a file from /root/ called 'textfile.dat'
Is there any way to log into the Centos Linux box, later, and see that textfile.dat was SCP'd from the box?