With Red Hat Linux as a DHCP server I want to connect windows xp so it may get ip address from the linux server on my test lab.Both of these computers are connected with a cross cable.
I assign ip assress to my eth0 192.168.1.10 with subnetmask 255.255.255.0
For the client i want that it may get Ip range from 192.168.1.50 to 192.168.1.55
Guide the minimum DHCP configuration so my client machine should get IP address from Linux server.
to start, i'm fairly new to opensuse. my issue is that i'm trying to use opensuse as my router and need to configure DHCP.
View 3 Replies View RelatedI need to shear internet i use isc-dhcp-serve and it work but internet doesn't work i have triad so many commends but still networking ... My setting is eth0 - wan eth1 -local
iface eth1 inet static
address 192.168.42.6
netmask 255.255.255.0
dhcp
authoritative;
subnet 192.168.42.0 netmask 255.255.255.0 {
range 192.168.42.10 192.168.42.50;
option broadcast-address 192.168.42.255;
option routers 192.168.42.1;
default-lease-time 600;
max-lease-time 7200;
option domain-name "local";
option domain-name-servers 8.8.8.8, 8.8.4.4;
}
I'm running jessie on virtualbox.
I set staticIP at /etc/network/interfaces.
When I stop/start vm(not restart), dhclient becomes up and ip is assigned by dhcp. Why?
--------------------------------
yoshi@vbox:~$ uname -a
Linux vbox 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24) x86_64 GNU/Linux
--------------------------------
yoshi@vbox:~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
[Code] ....
I'm trying to setup a DHCP server that serves several different VLANs, we have 5 in total. Our network is working correctly, with static IPs, we're able to ping across without any issues.
When I connect my debian box to an interface on VLAN5, statically assign an address in the correct range, it works. Similarly with all other VLANs.
To configure this box as a DHCP, I set one of the ports on the switch as trunk, connect that to the debian box to allow all VLAN traffic to reach my debian box.
I setup DHCP following the steps on [URL] ....
Then I configured different VLANs by following the steps on [URL] .....
However, with the vlans setup, I am unable to ping anything. This is essentially what I did.
Code: Select allSet the port on the switch to trunk with 802.1 encapsulation
disable eth0
vconfig add eth0 5 # to add vlan 5
ifconfig eth0.5 192.168.5.254 netmask 255.255.255.0 up
vconfig add eth0 5 # to add vlan 10
ifconfig eth0.5 192.168.10.254 netmask 255.255.255.0 up
[Code] ....
I do not know why I am unable to get any connectivity through my VLAN interfaces.
using Debian 5.0, GNOME desktop.my DSL service was to be connected today.the problem is my DSL light keeps blinking.ethernet light is solid.how do i setup my DHCP on my computer
View 12 Replies View RelatedI am connected to a network using any interface (eth0, eth1, or wlan0) that if my ip address was given out (dhcp) that my desktop responsiveness gets worse. Specifically the mouse has a sort of "sticky" feeling. I mean by that that I'm moving the physical mouse and the cursor is getting stuck here or there on the screen. It is extremely annoying. Here is my config file:
beethoven:~$ cat /etc/dhcp3/dhclient.conf
# Configuration file for /sbin/dhclient, which is included in Debian's
#dhcp3-client package.
#
# This is a sample configuration file for dhclient. See dhclient.conf's
[code]....
I have setup a few machines within my house. The Debian Squeeze machines do not provide a host name in the DHCP client list on my router. Strangely, my Ubuntu, Android, and Blackberry machines do show host names. I have noticed the same behavior when wirelessly tethering my Debian laptop to my Android phone (which also uses DHCP). Is there something I need to enable to have the name show up on the router?
View 14 Replies View RelatedFreshly installed Lenny system. Edited /etc/network/interfaces to use a static IP:
# The loopback network interface
auto lo
iface lo inet loopback
[code]...
I have installed dhcp3-server via apt-get install dhcp3-server, but I couldn't find any initscript. So, how can I start and stop it properly ?
For now , I have added "dhcpd" line in rc.local.
DHCP I have working, so is BIND.
I'm trying to get dynamic dns working and am having issues
I suspect this maybe a chroot issue.
I've tried to follow the chroot advise within the wiki for Bind but no joy.
eth0 is configured through a dhcp server connected directly to it. [URL]...the answer of the server is a UDP to 255.255.255.255. Please tell me how can it pass through this iptables configuration, because it does.
Code:
iptables -nvL INPUT
(policy DROP)
3281 201K ACCEPT all -- eth1 * 192.168.69.0/24 0.0.0.0/0
0 0 ACCEPT all -- lo * 127.0.0.1 0.0.0.0/0
0 0 ACCEPT all -- lo * 192.168.69.1 0.0.0.0/0
0 0 ACCEPT all -- lo * 93.114.xx.xx 0.0.0.0/0
[Code]...
Setup a DNS/DHCP/Directory server on Debian? I would like to configure the things in Debian so that can join Linux and Windows(if possible as m not sure yet) clients to the directory server. Any links to setup both Forward and Reverse lookup zone in the environment.
View 4 Replies View RelatedI'm new to the forum and actually to Debian as well. Have been running Ubuntu for the past few years. Just setup a small Dell laptop to use as a Squeezebox and Print server. It's been up 6 days without a hitch as far as serving music to the squeezebox and printing. The problem is that it loses it's static IP, so as long as I look it up and change the radio Squeezebox and printer definitions around on the clients everything keeps working.
Does anyone have any ideas?If the connection drops for some reason and the system has to re-initialize the connection, shouldn't it use the /etc/network/interfaces file and get back to the static IP that it is configured for?If anyone has any ideas of why this could be happening or have a solution, I would really appreciate the help.
I just put a pfSense firewall inbetween my ADSL router and my LAN. It's configured to have a cachng DNS server and a DHCP server. Among other things. For reasons beyond this post the address range served by DHCP changed from 10.0.0.x to 192.168.1.x. The new DHCP server gives 192.168.1.1 as gateway and DNS server name and not the public IP addresses of our internet provider.
After reconnecting our client machines everything worked just fine on the win-xp boxes, but the Debian Squeeze servers and Ubuntu 10.4 clients all started to get network timeouts. If I ping public websites it works but browsing to the same servers fails. Other services like POP3 and IMAP also fails. All machines use WiFi to connect and the access point is the same as before.
What could it be that make the debian boxes fail? My laptop runs squeeze too and also fails. But when connecting to various other access points at hotels and such I do not get this problem.
Another weird thing is that the debian server running virtualbox cannot do things online but the virtual windows boxes running on this machine can. Weird! Where should I start looking? How is networking/dhcp clients on Debian different from Windows XP?
I'm running gnome desktop on squeeze system. When I boot my system seems to be using my internet modem as its dhcp server. The rest of the machines on my lan are correctly using my router for that purpose. As a result, what happens then is that my debian machine frequently gets a duplicate ip address assigned to it. I would like to specify to my debian computer that I want it to use the specific fixed ip address of my router for dhcp purposes.
View 9 Replies View RelatedI am trying to enable DHCP so that it will give out IP's to some XP boxes when they boot. I have had success doing it dynamically, but not statically using the host declaration.
host xpTest {
hardware ethernet 00:50:56:2A:3B:00;
fixed-address 192.168.100.2;
}
My question is, what should the subnet declaration be if I only want to hand out static IP's like this? Also, the host is the same name that is specified in /etc/hosts correct?
Automatic Proxy Configuration via DHCP | AGIX Linux Tutorials & HowTo's | Ubuntu Focuson openSUSE not work, Why? # These 2 following lines are the key to your pac success:option local-pac-server code 252 = text;option local-pac-server "http://192.168.1.254/wpad.pac";
View 2 Replies View Relatedwhat are the major differences in statice IP configuration vs DHCP
View 1 Replies View RelatedAlright, I edited "/etc/default/isc-dhcp-server" and set "eth0" as the only thing listed for interfaces. I also have the code below in "/etc/dhcp/dhcp3/dhcpd.conf" and I even copied it to "/etc/dhcp/dhcpd.conf" for good measure, and I can't get the DHCP server to start. As an intermediate to advanced user, I am under the high assumption that it is broken since everything in the docs has been set. I have googled for two days and cannot find a fix, so before I report it as a broken package, would somebody with more experience with the package chime in?
Configuration file:
subnet 10.0.0.0 netmask 255.255.255.0 {
option domain-name-servers 10.0.0.254;
option broadcast-address 10.0.0.255;
[Code].....
I hid my wireless setup because it contains my WiFi network info including key. This box is routing, doing DNS resolution, and firewalling just fine. I just cannot get the friggin' DHCP server to start no matter what I try.
Oh, and is it safe to delete "/etc/dhcp" or "/etc/dhcp3"? They appear to be duplicates of each other...
Up until very recently I've had a wired network, and at boot I'd see messages about DHCPREQUEST and DHCPOFFER and stuff as it set up the wired network.
Now I've just got wireless working instead, but it still tries to use DHCP on the no-longer-existing wired network. So it says "DHCPDISCOVER on eth0..." and waits for a bit, then again and waits again, and all the time the boot is waiting for a reply to its DHCP requests and it's not going to get one. It doesn't seem to do any harm, because once it's given up and proceeded with the boot then the wireless does seem to work fine, but I'd like to speed up the boot a little by cutting out this needless waiting. Has anyone got an idea how I can stop it? I tried in Preferences-Network connections and in Administration-Network, and in System Tools-Network tools, and also from the network icon in the task bar, but I can't find anything which lets me configure the wired network eth0 or disable it or disable the DHCP.
I have some beginner questions about DHCP, Avahi, and configuring a small home LAN.Suppose I have a dynamic IP address assigned by my ISP, which requires DHCP be enabled in my dsl modem/router/"firewall" [sic]. Suppose for simplicity I have just one PC behind the dsl modem.I think "enabling DHCP" in the modem/router means that a DHCP client runs on the router, which communicates with a DHCP server run by my ISP when I boot up a PC on my LAN. Is that guess correct? Can I get DHCP to assign a particular local IP, say 192.168.1.10 (which is not the one taken by the router--- for this discussion, let's say that is 192.168.1.0) to my PC each time I boot it up?
Now suppose I want to build a stand-alone firewall, so that my LAN will have the firewall and the first PC behind the modem, with the first PC virtually behind the firewall. By default, I think these will both have DHCP clients running which I need to configure properly. The firewall should also have a DHCP server which should control how local IP addresses are assigned, correct? I should try to arrange that the LAN has only DHCP server, only one NTP timeserver, only one DNS nameserver, correct?My first PC seems to have installed an autorun client called Avahi, which performs DNS multicast services and incorporates something called zeroconf which seems to have something to do with remote desktops, which I don't need and which is a potential security hazard. But it seems that Avahi is an intrinsic part of the KDE desktop and cannot be removed. Just want to be sure that Avahi can coexist comfortably with dhcp3-client, which is also installed on that PC. They perform different tasks, correct?If I can get the stand-alone firewall to work, I know I need to turn off the commercial firewall in the dslmodem/router/firewall device. Should I purchase a bridge and try to turn off the routing function also?
I have a home Debian server running, and i would like to set it up as a gateway. I have 2 networkcards in it. So internet comes from the modem and on the other card i want to setup a dhcp server and it has to share the internet. But i want it also to connect to a vpn and share the internet of the vpn.. Is that possible?
View 4 Replies View RelatedI installed the latest Debian on a computer to make a backup appliance. No GUI.When the computer starts, everything is okay. The DHCP client is running, the network interface have an address, fine.If I do a /etc/init.d/network restart (or stop + start), no more DHCP client. t is stopped when the interface is down. When the interface is up, I have to start it manually.1 - is it normal ?2 - isn't ifup's job to launch the dhcp client ?3 - can /etc/network/if-up.d be the right place to resolve this ?
View 4 Replies View RelatedI've configured my dhcp server to update dynamically the DNS zones of BIND9 name server. Everything works ok, except for reverse nslookup:
nslookup 10.141.50.3
Server:127.0.0.1
Address:127.0.0.1#53
[code]....
How can I verify the following service configuration files/setup are ok with?(in RedHat)
httpd
sendmail
ldap
DHCP
DNS
SQUID
For example, I can use "testparm" to verify the my samba configuration . I want a similar kind of testing option for the above mentioned options.
I'm having a bizarre problem where my network connection stops working randomly. At first I thought it was a DNS issue since Firefox simply chilled out on "Looking up [hostname]" until it timed out, but after further investigation (pinging IP's, "host" and "dig" being unable to reach servers) it became apparent that I couldn't even access the DNS servers i.e. the Wicked Connection of the East was most sincerely dead.
There are two strange things about this: one, there are no errors except "timeout". The network manager is happy, Firefox is happy until the lookup fails... Two, the failures only start *after* DHCP configuration. DHCP configuration never has any trouble sending or receiving packets. I'm going to try static IP and whatnot to see if that helps, more information later.
first: PXE flawless bind to dhcp address but put next binding state to free second: when installer calls init script to reinit ethernet driver (e1000 (vmware)) binding fails 11.2 opensuse fail to reinit dhcp with log entry "no free leases" third: when manual set network install works how to preserve dhcp lease on reinit of driver?
View 1 Replies View RelatedBack in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.