I am dualbooting Linux Mint and Windows 7 on my Toshiba laptop. windows, I can see wireless networks. However,nder Linux, when I click on network connections, my wifi network doesn't show up. What should I do.
View 8 Repliesfollowing a new motherboard install I've just done a clean install of 10.10. At first, I was using the default network manager wifi to connect to my router - I had the upturned radar beam type icon in the top panel showing me the strength of the signal and access, by right clicking on it, to things like Enable Networking, Enable Wireless, etc. I read that installing WICD via synaptic would install wicd and remove the default network manager, so this what I did. My wifi is OK but I still have my upturned radar type icon and a new WICD icon in the top panel. I was expecting the upturned radar icon to disappear - is this correct? If I right click on the radar icon I can click on the Edit Connections option and change things - it appears I have both the default network manager and WICD working at the same time.
View 1 Replies View RelatedI can normally connect to most wifi connections, but for some reason I can't connect to my broth's-gf-parent's network. Windows 7 can connect to it just fine, but not Ubuntu. Once in a while I'll go to a cafe, and this will happen there too.hough, like I said I can normally connect to all other wifi networks with no hassle
View 1 Replies View Relatedgot a dell inspirion 15r (i think), and it comes w/ win7 (I HATE Win7) so i made him let me dual-boot with ubuntu maverick meerkat. (he wouldn't let me get rid of win7 cuz thats what his parents use.) It installed successfully, so we booted into it, and there was no wifi networks. I thought it was because wifi was disabled so i press the button i think its F5 but still nothing. I thought it might have been the comp but i booted into win7 (Que the Beethoven's fifth)... and it worked in win7 (thats a first) can someone help me. Oh and i forgot i used that terminal command to unblock wifi
View 2 Replies View RelatedDELL Inspiron 1501 Broadcom BCM4311 is the wifi adapter.The problem I am having is that I cannot get to search for wifi networks. It looks like the driver and everything is there but the wifi is disabled for some reason.I installed the drivers provided by the "Additional Drivers" application and they do not work.I also followed this fix and I could see in the menu that the wifi was added but I was not able to click it or look for wifi's URL...
View 9 Replies View RelatedFedora 10 (dual boot w/ XP) on Dell Optiplex with a Dell wirelessntennaI am on a university campus with campus-wide wifi network (so no router). I have a wireless HP printer that I want to be able to print to using an ad-hoc connection. The wireless antenna, networking, and wireless printing are all working in Windows XP (so hardware is OK). However, on the linux side, the wifi is really really finicky.
When I first boot up to fedora, it usually connects no problem to the campus-wide wifi network. If I try to switch to the ad-hoc printer network (which it sees), will not connect and, furthermore, it will no longer connect to the campus-wide network (and sometimes it doesn't "see" this network at all). It seems that restarting the Network Manager service sometimes helps to reconnect to the campus-wide network, but not always and I can't connect to the ad-hoc regardlessNOTE: I'm just barely a linux user, and I didn't set up my system - don't assume that I did anything that would be common sense and, if you can, walk me through your suggestions.
I have FC 12 running and everything was working fine for about 2 weeks or so. Then today after I put my Daughter to bed, I booted up the laptop and it could not find any of the many WiFi networks that are present in my area, and when I tried to get it to connect to my home network through a saved configuration in the Network Connections Manager it kept asking for my WPA2 Password but it would not connect. So I got out my delopitated Cat-5 cable and tried to do an update and see if that would solve the problem. But alas it did not work (hence the posting of this tread ).
I even tried to unload the "B43" driver using code...
But that did not do the trick either. Is there any way to get it to work again without doing a re-install of the entire Operating System? I already had to do that, and it is a big pain in the A$$ because of a defective ATI Card in the laptop.
I was on a car trip earlier, but we were stuck in traffic. The stop-go stop-go kind of BS. I pulled out my 9.10 laptop and figured I'd scan for wifi networks and see how good America was at securing their networks. (I work in IT support so it's one of those things I preach to no end yet people rarely listen).
I was using wifi radar, and picked up a truckload of networks every time we'd stop. But something didn't sit well with me. When I click on the network manager icon in the top gnome panel to see what networks were available, it never seemed to refresh.
Example - the first 5 networks I saw were 1, 2, 3, 4, 5. We would stop-go more and more and miles later when I'd see more networks in the area show up in wifi radar, yet hit my network manager, I'd STILL see networks 1, 2, 3, 4, 5 and not 30, 31, 32, 33, etc like I expected.
What kind of refresh time or cache or whatever does network manager have? I just didn't understand why I was seeing the original networks from 15 minutes/miles ago and it never seemed to update.
After I put my laptop in suspend mode and I resume it, it doesn't immediately detect the wifi networks. I have to wait for 5-10 minutes to see the various networks appearing.Is there a command I could run from the terminal to scan the wifi networks? I have tried the wcid application but I got some kind of conflict and then I removed i
View 5 Replies View RelatedI just freshly installed Jessie on my Dell Inspiron 5110, I configured the network on the installer and had no problem. I can browse the web, get updates and install software.
But I can't find new networks. It just show "No Networks".
lspci -vnn
Code: Select all09:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34)
Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN [8086:5325]
Flags: bus master, fast devsel, latency 0, IRQ 55
Memory at f7e00000 (64-bit, non-prefetchable) [size=8K]
[Code] ....
What input should I post?
I'm using Ubuntu 10.04 - 64bit install with an A215. The wifi was working fine until today. Ubuntu seems to detect the hardware, and it shows the interface as being 'up', however no networks show up in either the network manager or 'sudo iwlist scan'. I'm not sure if it's a driver issue, or if the hardware itself died.Here is the output of lspci:
ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
[code]...
I have no problem with my wireless network at home, or visiting friends, but it won't connect to public, open, unsecured WiFi networks, eg hotels, trains, ships.I'm using Ubuntu v9.10, NetworkManager applet v0.7.996, on a Dell Inspiron 1750 laptop.If I left click on the NetworkManager, the available wireless networks are displayed and I can see the relevent open networks, named as expected and shown without the lock icon. I click on the relevent entry, watch a spinner for 30 seconds or so and then it drops off and I have no connection. This happens for "all" open connections.If I look at my defined Wireless Network Connections now, I can see, eg, "Auto Internet@Sea, Last used: never". Editing that connection:
[Wireless]
SSID: Internet@Sea
Mode: Infrastructure
[code]...
I know Windows forward and backward but I am so new to linux it's just wrong. I just installed fedora (like 1hr ago) on and old toshiba laptop with a WiFi PC card. Everything seems to work fine except. My Networks connects to my home Wifi network but it will not connect to internet. When it connects the IP address isn't even close to being in the same range as my other laptops and PCs. Like I said I'm new to linux but I'm wanting to learn. Any fixes for this issue? Which linus book is the best one to read for a beginner? Other then not connecting to internet I have no complaints.
View 14 Replies View RelatedI have been an Ubuntu user for a year or so. My level is still ultra n00b but I am trying. Whenever I update Ubuntu there is always a WiFi problem, always. So now I am having problems getting wifi to work in 10.10. In Network Manager I can view wifi networks fine but I cannot connect. I tried with wicd also but I got as far as "getting ip" and then it would hang up.
lspci
Code:
Code:
Code:
I am not sure what driver I am using as I don't know how to exactly ID my driver. I know there is a way to ID the driver using airodump-ng but I have yet to find it.
I have a feeling this is a driver issue as one time I was able to establish a connection that then dropped a few minutes later. I have a feeling I should be disabling/removing the current driver and replacing it with ipw3945 or possibly a driver ndiswrapped? The problem is I cannot figure out how to remove the current driver.
I was going to switch back to 9.04 but I thought I would try to manually figure this one out instead of taking the easy way.
I have Lucent Technologies Orinoco Silver 11 Mbps PCMCIA wifi card. It worked perfectly in Fedora 10, but after updating to Fedora 11 it stopped finding any wireless networks. The updating were done with automatic updating utility. The card works perfectly in Windows, I tested it today.
My laptop is HP nx6110 if that matters.
Here is the situation:
When I plug-out the card, the Network Manager disables wireless networking as it should. When I plug-in the card, wireless networking is enabled, so the system seems to recognize the card in some way.
If I try to connect to "Hidden wireless network" (because there isn't any wireless networks listed in the Network Manager) system tries to connect for a couple of minutes, and then asks wireless settings again. Orinoco card's lights DOESN'T blink normally when connecting to the network (one light should blink rapidly and one should light continuously, but both are blinking rarely or doesn't blink at all).
In System->Administration->Network in tab Hardware (hope those names are correct, I use Finnish version of Fedora...) is:
It seems that the card is detected right.
Here is what I have done to get the problem solved: In System->Administration->Network I have tried to connect to the wireless network manually (disabling the Network Manager). I can't get the connection. It gives me random error messages, sometimes "Check the cable" or something like that, sometimes just timeouts IP determination.
I have tried to connect different wireless networks, no connection. All tested networks worked with another computer.
No matter if I reboot or service network restart or plug-out plug-in the card... the problem still appears.
Tried to find (and reinstall) drivers:
Code:
No Matches found
Code:
Here is the output of lspci. The output is the same if the wifi card is connected or not.
Code:
LAN connection is working just fine.
I have installed Ubuntu for netbooks on my four year old laptop and of course the wifi card is unable to search for wireless networks when I'm booted into Ubuntu. I do have the driver software on a recovery disk. Would installing it in Ubuntu fix my problems?
View 4 Replies View RelatedI can not connect to wifi networks, i can see them but not connect.
My wifi device is:
I am trying to configure my android phone (rooted Eris running kaossfroyo 2.2) to be used as a midi controller. Which I am having enough trouble with as it is but it has raised an annoying issue that occurred a month ago when I used the phones tethering network with my laptop. After connecting the laptop to the phones network (either tether, or an Ad-hoc network created using the network manager) I am unable to switch to other networks. In other words when I'm done with the phone-laptop connection I cannot connect my laptop to my home network! When I click on the other network connection I can see that it is attempting to connect in the upper right corner of the desktop (the network icon) but it will not make the connection.
What happens is that the network indicator will make the little circle graphic as if it is trying to connect but it never will display the other circle as green indicating that it has connected. but when I disconnect from the home network that is not connecting I will get a message underneath that will say that ad-hoc network disconnected! If I am switching from the android tether it will say Android-Tether disconnected etc. Even though when I click on network manager it shows that I am attempting to connect to the home network (labeled LIBERTY in my case) upon disconnection it shows the ad-hoc or tether connection being disconnected.
I am absolutely baffled by this! The issue persists even after deleting the ad-hoc connection from the wireless settings tab!!! I would speculate that for some reason the laptop is attempting to connect to the previous ad-hoc connection despite me wanting it to connect to LIBERTY. I am very confused and hope someone can lead me in the right direction.
I was wondering if there's any way for a laptop to be both simultaneously connected to a wireless network, while at the same time acting as an ad-hoc network with local access to serve as a wifi connection for my mobile device, which would be ssh-ing into the laptop and using local resources.
View 1 Replies View RelatedPc 1 : netbook with an usb wifi antenna spotted on a free wifi hotspot
Pc 2 : same model netbook that can't access internet
What I need : Share the wifi connection by the 2 internal WLAN on ubuntu by network-manager
I could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
I currently have a HP Pavillion dv-6 and when I go into networks no wireless networks show up even though I know there are wireless networks in the area that I have previously used o a different computer.
View 8 Replies View RelatedI have two networks on a server. One being my internal network, and the other being an external IP address. This is on Debian Lenny. Here is my /etc/network/interfaces file:
I can reboot my system and sometimes eth1 is accessible from SSH, and other times eth0 is accessible. Then sometimes eth1 will just stop being pingable alltogether. This is a fairly fresh install of Debian, and the only thing I have running is VMWare Server 2.0, bridged to both of my network connections.
Here is what my route looks like:
Am trying to set Postfix to only allow specific machines in the network to connect and send mail through it. However, it doesn't appear that it's working properly.Some background:Test Outlook Client running on 192.168.10.11
Postfix's main.cf has the following:
mynetworks = 192.168.0.1
smtpd_sasl_auth_enable = yes
[code]....
I am fairly new to linux, I getting to grips with the offline and I am starting to be converted. The major problem I have is that I cannot get it to connect to my wireless network. I am using Fedora and my wireless card is the Belkin Wireless G Desktop Network Card - F5D7000uk (version 3000uk).
I am able to see the network and pick up the essid automatically through networkmanager or iwlist scan. I have tried to connect using Network manager:
- it picks up the information and I submit my WEP key and the icon top right shows two green dots with a blue flame(?) rotating between them for a few minutes before asking for my key again.
And using the terminal commands.
Code:
$ sudo iwconfig wlan0 mode managed
$ sudo iwconfig wlan0 essid "BTHomeHub3-12GT"
$ sudo iwconfig wlan0 key 563865428
then tried to test the connection using
Code:
$ sudo ping www.bbc.co.uk
ping: unknown host www.bbc.co.uk
Code:
sudo iwconfig wlan0
wlan0
IEEE 802.11bg ESSID:"BTHomeHub3-12GT"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management: off
Link Quality: 0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I have an HP Netbook that has Linux MintI have absolutely no issues with awired connection, however my internal wireless will not search and find wireless networ in range. It appears I have one saved (my home network) and I can connect to that, however, if I take my laptop to school or work, it will not find any networks to connect to. On a side note, I have no icon on the taskbar indicating wireless, and I used to have one. I have no idea where it went or what happened. I can answer most questions you may have but im a relatively new linux user (but I have a coworker that "knows all" and could help answer a question that I cannot.
View 2 Replies View Relatedset up a redhat nat router for a classroom we have out main network is 192.168.110.0/24 and we ran out of ip address for all the school computers so i added a nat router to a large classroom with a network address of 192.168.116.0/24 almost everything is working fine except a connection to the ads server with a program called medisoft im guessing my nat is blocking it how can i open up all ports to and from my 192.168.116.0/24 network as it doesnt need any protection
View 2 Replies View RelatedI have a freshly installed ubuntu 9.10 but I can't connect wirelessly. When I click on the network icon, there are no wireless networks available. (Disabled?) And I've tried maybe activating it, but my Hardware Drivers come up empty. wireless adapter
[code]...
I have a fairly standard home network set-up with a router and a couple machines on the internal network (with private IP addresses 10.0.0.x). One of these machines is running my subversion server, which is in turn used by my laptop. I am now trying to configure my laptop in a way that I can have one working subversion copy connected to the repository which works both when the laptop is connected to my home network as well as if its connecting from internet. I configured a "virtual server" on the router, so that port 443 goes to the machine with subversion, and this works fine. Now I don't know how to configure the laptop to go to the same machine - because the IP is different if I want to access it from outside and from inside. I tried to connect to the external IP of my network, but the router refuses to let the connection go "out and in again". how to get it configured?
I am using Debian linux with wpa_supplicant on the laptop.
I have one doubt that is how can we actually connect a system in private network with the system in a public network using IP address. I have one system in private network (in my campus) I need to connect it with the system on public network (home) using IP address and communicate with each other. How can I do it or is there any other way of connecting these two systems more easily?
View 4 Replies View Related