it has Adobe Illustrator, I would like to get a file or three across to it. How? The only Mac bit that seems to know what a network card is is something called 'airport'. DHCP is all around it. "Network" means 56k modem, which can't connect to anything. If I show it a usb disk, it wants drivers, which apple hardly have up still for os 9.0.4.
View 7 Repliesi am trying to transfer a file from my live linux machine to remote linux machine it is a mail server and single .tar.gz file include all data. but during transfer it stop working. how can i work and trouble shooot the matter. is there any better way then this to transfer huge 14 gb file over network,vpn,wan transfer. the speed is 1mbps,rest of the file it copy it.
rsync -avz --stats bkup_1.tar.gz root@10.1.1.22:/var/opt/bkup
[root@sa1 logs_os_backup]# less remote.log
Wed Mar 10 09:12:01 AST 2010
building file list ... done
bkup_1.tar.gz
deflate on token returned 0 (87164 bytes left)
rsync error: error in rsync protocol data stream (code 12) at token.c(274)
building file list ... done
code....
Having a bit of a issue with Debian Squeeze and transferring files to the Sony PSP..Hook up PSP to USB port and Debian mounts it..I go to drag a 125 meg mp4 to video folder..Copy windows takes about 10 seconds to transfer it..Exit USB mode and there is no video there. Go back into USB mode and look at video folder on the PSP memory stick and there is no video..It vanished. From another after copy progress closed I right clicked PSP and unmounted it..
It error-ed saying device was busy and could not unmount..Looking at light on PSP i see memory stick is still being written to..i wait for light to stop flashing..About a minute or so..Then am able to unmount it..Go to PSP video and theres the video ready to be watched. Debian isnt accurately showing the copy progress...Its showing complete when it isnt..I have to watch the light on PSP to know when it is truly finished.
I managed to ssh lan for file transfer but now i want to connect to ssh again for file transfer but from another city,not lan, What ip do i type in Host Ip? I mean,i can tell them to start the ssh server but then i need to type the external ip.
View 2 Replies View RelatedHARDWARE SPECS:
- Intel P4 3.2GHz
- Gigabyte G32M-S2L
- 3GB RAM DDR2
- 3 x 1TB RAID5 (MDADM)
- 1 x 1TB OS Drive
New Linux user here. I'm running 11.3 x64 gnome (runlevel3) on my headless home file server. I've mounted my RAID array onto /shared and have setup samba (through Yast) for file sharing. However I am having an issue when I transfer multiple small files over the network (i.e music) it will crash the box. I am unable to reach it through ping or SSH. It is also physically unresponsive where by connecting a keyboard or mouse to the system will not work.
Looking through /var/log/messages does not indicate any sort of issue. I've tried turning off unnecessary programs (rTorrent etc) to make sure it isn't overloading the connections however the box still crashes. Although transferring files locally from HDD to HDD does not crash the server.
Ok, the only thing I remember doing is changing out my hard drive because it went bad. I swapped in a new one and reformatted with Windows 7. (I can hear the boos and hisses as I type) Anyway, now file transfers are exceedingly slow. They are ~10KB/s when they should be ~40MB/s. The odd thing is that it mostly occurs on large files, but not all large files and sometimes smaller files are affected. Copying files from one hard disc to another on the server, as well as copying from the server to Win7. Local files are not affected. The problem does not occur on my laptop which has Slackware Linux on it.
Another thing about the problem is that when I mount a disc image on a virtual drive, access time is very slow and windows explorer is very unresponsive and often locks up completely.
I have a samba server with Slackware Linux on it and a Windows 7 client. DHCP is configured through dnsmasq. (dhpc-host=<mac address>,<computer name>) Every now and again, dnsmasq seems to conk out when I try to access the network with my Win7 machine. I then have to reboot the server, as my only access to it is via SSH and I don't have a video card in it. After the server reboots everything is fine until accessing the network with my Win7 machine conks it out again.
I've tried different MTU settings, different network cards on the Win7 machine(Dlink and realtek), various regedit hacks, but none of them produce any results.
I am currently running Windows Xp with service pack 3 and OpenSuse 11.0 (i586) on the same machine on separate hard drives. here are the specs on the machine. (Note: it is only a single core machine. I have no idea why both Suse and Windows say it is dual core as the processor was bought and installed months before dual cores went on the market.)
OS Information
OS: Linux 2.6.25.20-0.5-default i686
Current user: telknor@linux-l3e2
System: openSUSE 11.0 (i586)
KDE: 4.0.4 (KDE 4.0.4 >= 20080505) "release 15.4"
[Code]....
Now on to my problem. About a year ago I had to wipe my Windows drive and backed up about 32 GB of stuff from it to my OpenSuse drive. I did this from the Suse OS using Dolphin. In fact I can see, open, change, delete, modify layout, and move stuff around on the Windows drive all day long from Suse. I can as I said pull stuff over to the Suse drive from Windows drive while in Suse and save to Suse drive. Now I have need of the stuff that was moved but Windows does not see the Suse drive for what it is. Just says 'unknown partion type' gives size in GB and ignores it otherwise. From Suse if I try to move stuff back to the Windows drive it starts to transfer then stops and tells me it does not have permission to access the destination drive, folder, or location depending on how I tried to save it to the Windows drive. Adding new hard drives to the system does not help and the external 1 TB drive we have Suse can see it but will not do anything with it. The thumb drives on the other hand Suse does not have a problem with. It will open, read, and write to them all day long. Suse will not access the network to dump files to the network file server and it does not see any other systems on the network not even the ones running the same OS. I want to do the following:
1. Move the Windows files from the Suse drive to the Windows drive in same machine or to the network file server (also a windows machine)
2. Move all the Suse files to another machine running same Suse OS.
3. Wipe the Suse drive in this Machine so that Windows can use it.
When I try to transfer a large file lets say 700Mb or so my wireless shuts down and i have to restart my ubuntu computer the other computer is vista.ubuntu is on a wusb54gver4 and vista is going through a wrt54g tm running dd-wrt mega.I
View 6 Replies View RelatedWhen accessing an NFS mount for a large (200MB+) file transfer, the transfer starts rapidly, then becomes slower and slower until it hangs. On several occasions, it has frozen the client machine. Both client and server are set to default to nfs version 3. Slowdown and hang also occur when connecting to FreeBSD NFS mounts.
Presumably (I hope), there is some sort of configuration for the client that needs to be set. what should be changed in the configuration? This worked out of the box in OpenSUSE 11.0.
I've fixed almost everything except this problem. My network card worked fine on Windows but since I switched from Windows, file transfer over the network using my network card is horribly slow, 30kbps max on 100mbps wired connection. I know my network card is working fine, and I'm trying to copy files between my Ubuntu PC and windows PC, I've set up Samba as recommended by these forums, I can transfer files when using wireless connection, but I still can't transfer files at a speed faster than 30kbps on a wired connection.And the funny part is, it's fast when copying files from Ubuntu to Windows but it's slow the other way. And I've tried this with more than 4 different Windows computers.lspci returns this for the network controllerCode:Silicon Integrated Systems [SiS] 191 Gigabit Ethernet AdapterIs there any way of updating drivers or something that I can do to fix this problem
View 9 Replies View RelatedI have installed Ubuntu Server 10.10 on a PC which is connected to my home network. I want to be able to connect to this PC from my iMac (OS X 10.6) and run things remotely like I can do with software such as VNC between Windows systems.
View 1 Replies View RelatedI have a Windows machine and a Linux machine both hooked up to the router via Ethernet cables. What is the easiest way for me to transfer files from the Windows machine to the Linux one?
View 2 Replies View RelatedI was wondering if there's a way to transfer files from one pc to another using a network cable or something
View 13 Replies View RelatedI have a linux server and I have SSH Access to it.
How do I transfer my files to my desktop.
how can we transfer the file from putty session to windows host which resides remotely....
View 1 Replies View RelatedWe are having few computers in ms-dos 6.22 , we want to download file from Dos machine to redhat linux machine.
View 4 Replies View RelatedI'm using Scientific Linux on a laptop, connecting to a debian server on my LAN via a basic BT HomeHub router. When starting a file transfer with ftp or rsync from the laptop my connection is dropped, every time, after a couple of seconds. I have to reset my network adaptor and restart my network manager (wicd in this case) in order to get network connectivity back. I had a very similar problem before - [URL]. On this occasion my workaround was to replace NetworkManager with yast. I am now using SL though so no yast available, and I am not using NetworkManager any more anyway.
View 3 Replies View RelatedI am transferring a file from a linux pc going to a windows ftp server using "ftp put". My file is a zip file that includes .txt files inside it. Here is what's happening when I transferred this file :I used ftp put for transferring and found that my transferred zip file was corrupted and couldn't be opened on the ftp server.I found the solution for this on the internet. I needed to use 'binary' to make it right.
I transferred again using binary and then ftp put the zip file onto the other end. Yes, it worked. My zip file wasn't corrupted anymore and I could already opened it on the ftp server. But the problem remains on the .txt files inside it. Converting the file into binary made my .txt files to be distorted and unreadable. I read from the internet that .txt files need to use Ascii instead of Binary to be readable, but if I use ascii it would cause my zip file to be corrupted again. I need to successfully transfer a zip file that contains .txt files using ftp put.
I am trying to transfer a file using tftp between two PC's. I have installed tftp-server, tftp, xinetd on both PC's. I am unable to transfer the file between the two systems. although the self transfer is working on both the system. I am getting the error "Transfer timed out"
cat /etc/xinetd.d/tftp
# default: off
# description: The tftp server serves files using the trivial file transfer
[code]....
I have login of two ftp servers and I want to transfer the data from one ftp server to another ftp server. How can I do that, without downloading to local and then upload to other ftp?
View 7 Replies View RelatedI wrote this script in attempt to set-up automatic file fetch from the server using SSH; I want to collect *.pdf files and would like this to happened automatically. However, when I run below script I keep getting prompted for a password, how to include password in the script and how to export list of transferred files into the log file in txt format
scp root@192.168.1.1:/var/www/html/Apps/*.pdf /media/DataBackup/Linux/imported/ &>/home/denis/Logs/remotefilefetch.sh.out
This script works to a point, however I am prompted for a password and log file is created but remains empty.
I have to transfer a file from Linux box to a system either a windows or Linux(most probably windows). how to do that remember as a user i have limited access on the Linux box. So no SAMBA and no NFS. I can ping successfully that machine from my Linux box.
Is there any way to know what type of operating system machine have if i have only IP address and the machine is anywhere else in the world.
I got a souce code in linux system. That's why my executeable file can be execute in linux.
Since that I can makefile in linux. But I'd like to make an executeable file in Window system the same.
But I didn't got any source code in Window system. Can I use any software to transfer my
execute file like "aaa" to "aaa.exe" in Window system and can be executed.
I have 2 linux computers, and a serial line between them, one of them is only accessible through a serial line that has shell on it. How can I transfer files between the 2 computers?
I've heard that it can be done with some rz/sz magic...
Can I do the same trick with a pseudo-terminal instead of other computer?
I'm trying to transfer a directory, and all it's sub-directories and their contents, to another FTP server via SSH. I'm using CentOS Server 4.4. I can 'put' a single file, but can't figure out how to do everything at once, which I need to do.
View 5 Replies View RelatedI want to transfer file using ftp protocol. I m using following linux distribution.
PHP Code:
LSB Version::core-3.1-ia32:core-3.1-noarch:graphics-3.1-ia32:graphics-3.1-noarch
Distributor ID: OracleVMserver
Description: Oracle VM server release 2.2.0
Release: 2.2.0
Codename: n/a
When I run PHP Code:
[root@OFSMUW-VS-51 ~]# service ftp status
output is
ftp: unrecognized service
How would I install FTP? Do I need to install ftp server or client? Where would I get suitable ftp server/client for my distribution. Some rpm related to ftp are already in my machine please find the details
PHP Code:
# rpm -qa | grep ftp
ftp-0.17-35.el5
lftp-3.5.1-2.fc6
tftp-0.42-3.1.0.1
I have one Linux server equipped with WiFi . I want to measure data rate speed on this connection . Is there any utility on my Linux that can measure data speed on one specific Ethernet connection when transferring large size files through WiFi connection?
View 2 Replies View RelatedIf I enable compression when I use ssh to run remote X11 applications on a local display.
View 1 Replies View RelatedI want a program that can be installed in two pc and measure speed of transfering files from one to another or any data measured in Mega bit
View 1 Replies View RelatedHow do you transfer a file from a local Mac to a remote Linux machine
View 5 Replies View Related