i have installed ubuntu version 9 and i cant seem to find where hard disk partitions are,what do i do?also what do i do to install the webcam and to change from gnome to Kde enviroment!!i also installed virtualbox but i seem not to find the icon
View 3 RepliesI want to make the transition from windows (sick of it). Im using Lenovo G530 Laptop and was wondering which would be the best Linux Os (meaning Ubuntu, fedora or something else). Keep in mind that I mostly use my laptop for college work and a lot of video and audio editing. I also want to be able to run Dual operating system (meaning that I wanna run both Linux and Windows) from the same computer as it might be easier for me to make the transition a little bit more easier. That being said I need someone to give me tutorials (video preferred) on how to make the partitions on the hard disk and step by step instruction on how to install both the two OS in my laptop.
View 3 Replies View RelatedHow do I check my hard disk Revolutions Per Minute (RPM) speed from a Linux shell prompt without opening my server case?
I referenced some other articles. they give only model number, serial number and disk space, but I need Hard disk RPM speed using shell script. any other Java program
Ubuntu 10.10 is dual booted but it is my primary OS.
Unfortunately it's on the outer edges of the disk in an extended partition.
This has always bugged me, with regards to read/write performance.
Do my concerns of reduced performance have any foundation? Should i bite the bullet and format the drive installing ubuntu first?
I ran the disk read benchmark and my read speeds were 100MB/Sec at the beginning of the test to just 55MB/Sec at the end. I have no idea if the position of the test has any bearing on the position of the disk or whether the speed recorded is affected by other factors such as the tests function or simulation.
Especially /var because I am running a MYSQL server on this box. I want to know if there is a safe procedure to follow to move these partitions from the current sda2 and sda3 that they are now to sdb2 and sbd3 because this is a much bigger disk. I don't want to break MYSQL and I don't want to be down for a long period. I have heard of some people suggesting a sym link to a /newvar and /newuser on sdb but I have also read this will not work when moving to a different physical drive.
View 3 Replies View RelatedI read this thread but
Code:
anisha@linux-uitj:~> su
Password:
[code]...
I got a new hard drive yesterday, a Seagate Baracuda XT 2000GB SATA3. I'm running it on the SATA3 jmicron chip in AHCI mode, and Opensuse 11.2 is having issues with using this hard drive properly.
The hard drive seems to take a while to detect, for one thing. After it is detected however, I am told I have no hard disk that can be used for installation. The exact message is:
"No hard disks were found for the installation. Please check your hardware!"
After that, I'm told the partitioner can't read the partitions on my hard drive properly:
"The partitioning on disk /dev/sda is not readable by the partitioning tool parted, which is used to change the partition table.
You can use the partitions on disk /dev/sda as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or rename partitions from that disk with this tool."
I partitioned the new hard drive under Windows, with a partitioning tool called Partition Wizard (free / home version). I'm not sure if hard drives partitioned with this tool are not recognized by OpenSuse's partitioner, or if it's something else.
I already installed Windows on this hard drive, so I can't delete all the partitions I have so far and start all over again (I'm keeping my system a dual-boot between Windows 7 and openSuse 11.2). What can I do so OpenSuse will see and modify my partitions? If it is the partitioning not being understood, is there some sort of tool that can make the partition table of the hard disk linux-readable? (a free Windows program that could do such).
I have what seems to be a hard disk Write speed problems with my first hard drive. Timing the cp command of a 700 Meg file takes about 8 secs from disk 2 to 3 but takes 25 minutes from disk 2 to disk 1.
Here are the details:
Kubuntu 9.04 (Kernel 2.6.28-15-generic)
Hard Disk 1 : /dev/sda (WDC WD2500KS-00MJB0)
Partitioned
/dev/sda1 ext3 / 10 Gigs
/dev/sda2 extended 222 Gigs
/dev/sda5 linux-swap 2 Gigs
/dev/sda6 ext /home 220 Gigs
Hard Disk 2 : /dev/sdb (WDC WD2500AAKS-00F0A0)
Partitioned :
/dev/sdb1 ntfs 16 gigs
/dev/sdb2 xfs /home/eric/data_drive 216 Gigs
Hard Disk 2 : /dev/sdc (ST3500320AS)
Partitioned:
/dev/sdc1 xfs /home/eric/data_drive2 465 Gigs
By doing 'time cp ...sdb1/test.avi ...sdc1' takes about 8 seconds and same vice-versa. the command 'time cp ...sdb1/test.avi ...sdb1/test1.avi takes about 11 seconds and the same holds true if sdc1 is used But copy sdb1 or sdc1/test.avi to either sda1 or sda6 and it takes 25 minutes. Same problem if I copy from the same drive partition (sda). I have booted a livecd Knoppix 6.2 and the same problems happens.. So safe to say it's not Kubuntu. The only thing that is left to do is backup and reformat the partitions as XFS and try again. I also did a full smartcontrol Extended test and no errors. Checked all the various logs and nothing found.
I just bought a new 2 TB hard disk to replace my old 175 gig one. I currently am dual-booting Lucid Lynx and Windows 7, and rather than go through the process of reinstalling both, then reinstalling all my programs, settings, and everything, I was wondering if there's a way I can just copy the partitions on my 175 GB disk to the new one, grow them to fill up the rest of the free space on the new 2 TB disk, and then plug that HD into the primary master plug on my motherboard... will that work?
View 4 Replies View RelatedI'm trying to install Ubuntu 10.10 64-bit on my laptop HP pavilion 3046ee . When I reach the partition part , it doesn't detect the Windows 7 os , and doesn't detect any hard disk partitions ( it sees the whole hard disk as one unallocated partition ). I faced the same problem when I tried Ubuntu 10.04 LTS.
View 1 Replies View RelatedIm new to ubuntu. How to auto mount hard disk partitions.
View 1 Replies View RelatedI've a faulty hard disk I'm trying to read data from before I send it to the professionals. The disk makes some "good" mechanical noise when plugged into an IDE-USB header into my machine, so I think it's spinning up OK.
Under Windows, the disk is seen in admin tools but I can't do anything to it; it's unreadable and unalterable.
Under Linux (Ubuntu), I see the sdb appear in /dev. No partitions though (no sdb0 etc). At first, I thought this implied that my MBR was bad and the partitions could not be found. But, using dd suggests it's a little worse that:
Quote:
sudo dd if=/dev/sdb
dd: reading `/dev/sdb': Input/output error
To use squid i want to install linux in my 200 GB hard disk. I need guidance regarding to installation phase.A server which will be dedicated for squid proxy what things should I keep while installing my red hat linux operating system.I mean the partition sizes for swap ,root ,boot and any partion for squid cache should I need during making partitions ?
View 2 Replies View RelatedWe have a server with RAID 0 with 4 hard disks on it each 250 GB. Linux kernel must find one hard disk named: /dev/sda with 1TB capacity. right? And also we have 2 partitions on sda: sda1 and sda2. We want to add another partition but we don't have enough space.
Now the problem:
If we add another hard disk and run
Code:
fdisk -l
Will the /dev/sda space incremented automatically so we can add new partitions or we must do something?
i've fedora 15 & windows vista installed on hard disk partitions.i can access windows files from fedora but how to view fedora files when i'm working on windows???
View 11 Replies View RelatedI tried to install ubuntu 10.10 today through livecd. but the partitions in my 60gb samsung harddisk are not detected. My entire harddisk is shown as unallocated free space. Also gparted is not detecting the partitions as well. I am currently not facing any problems with my partitions in windows xp. I tried the solution given here (to no avail): [URL]. I have had no such problems with previous versions of ubuntu.
View 9 Replies View RelatedMy PC configuration is as follows:
CPU: AMD Athlon II 245 X2
RAM: 2GB DDR2
MB: ASUS M2A74-AM
SATA DVD-Writer
WD 320GB SATA HDD.
SATA Controller is in AHCI mode in BIOS.
Partition Table:
1. Pri. (Windows 7 Ultimate)
2. Log. (Data)
3. Log. 15GB free space (want to install Linux in this partition)
I want to install Debian 5.0.4 from DVD. But the installer is not showing any partitions, it says entire hard disk is blank. But I ran 'fdisk -l' in the console, it shows the partitions correctly.
I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedI have two SATA disks, 80G and 1T. Using "df" command we can see the all partitions:
/dev/sda3 6.7G 2.5G 3.9G 40% /
tmpfs 1.7G 0 1.7G 0% /lib/init/rw
udev 1.7G 220K 1.7G 1% /dev
[code]...
If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
How do I check my hard disk Revolutions Per Minute (RPM) speed from a Linux shell prompt without opening my server case? any other third party utility please let me know.Ieferenced some other articles. they give only model number, serial number and disk space.
View 9 Replies View RelatedI am new to linux. I am trying to install suse 11.3 on my desktop which has following configuration:
Intel Pentium 4 processor 32 bit
512 mb RAM
80 gb Hard Disk
I made a 20gb partition on my hard disk and formatted it as fat32 for installing suselinux on it. I changed my boot priority and booted the system from the bootable dvd. The problems are:
1). Message is displayed telling to ensure that cd 1 is in the drive. I cannot make out what this means when the dvd is already in the drive. If I press ok same message keeps coming if I press back following occurs.
2). The installation starts and asks for language and keyboard type. Then it asks me to specify the hard disk and then a message is displayed that it cannot find repository.
I cannot install F11/12 into Sata hard disk with AMD SB700 neither full installation image or live image in USB drive. It cannot find the hard disk in my machine. But all the things are working fine with F10 installation. Does anyone have the same issue
View 5 Replies View RelatedI'm trying to install debian-6.0.2.1 from hard diskand it can't find my iso image wich is on the slackware partition.i downloaded initrd.gz an vmlinuz,added some lines to lilo.conf so that i can boot but then when it searches for the iso image doesn't find it .
View 6 Replies View Relatedmount from the old hdd to the new hdd i mean (Hard disk)
View 2 Replies View RelatedI use openSuse 11, 64 bit. I would like to install Java, but do not know how. I can find the Java-site, I can download to my hard disk, but I can't install.
View 9 Replies View RelatedWhen I try to install 10.4 on my hard drive, I get all the way to the "Prepare Partitions" menu and there are no disks listed and all button are grayed out. I am installing on an EVGA X58 motherboard with Intel ICH10 and I have AHCI enabled. Does Ubuntu support AHCI? Do I need drivers to install?
View 3 Replies View RelatedI recently upgraded to 10.04 and during the upgrade process my external hard disk was plugged in. Now everytime I boot up ubuntu informs me that sdb1 is missing and wont boot up till I ask it to "skip" waiting for it. Also I am assuming because of this I have trouble mounting any other external hard disk other than my own, keeps giving some sort of unable to mount problem
View 2 Replies View Relatedafter installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View RelatedI want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View Related