After updated libflashplayer to 10.1 and installing the 32 bit compatability libraries as described in some other threads, I can no longer use mplayer, ffplay, or vlc to watch flash video.
Code:
mplayer /tmp/Flashsomething
In all three cases:
* there is no sound
* video is choppy at best
[Code]....
Code:
ffmpeg -i 4x24.wmv
FFmpeg version git-1dbd813, Copyright (c) 2000-2010 the FFmpeg developers
built on Oct 1 2010 19:28:12 with gcc 4.4.3
configuration: '--enable-avfilter' '--enable-avfilter-lavf' '--enable-vdpau'
[Code]....
here there is black filled window with green squares spots & no audio
from the php or html webpages pages, can we find the direct link to the flv files. videos it is easy, ok, because it places with firefox the flv file into the temp. but what about all other streams of webcams, videos, music, ... so that one can use mplayer
View 1 Replies View RelatedToday I got update notification. I type in terminal yum update, and get this error: Quote: Error: Missing Dependency: libnetfilter_conntrack.so.1()(64bit) is needed by package iptstate-2.2.1-5.fc11.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest
I removed iptstate.x86_64, again run yum update, and than, ibnetfilter_conntrack got installed. I tried to install iptstate.x86_64 again, but i get Quote:
[Code]...
I created an EC2 instance with Fedora 12 x86_64 about a month ago. I have been getting an hourly system log error:mcelog: Cannot open /dev/mem for DMI decoding: No such file or directoryI was ignoring it because I did not notice any implications, until now.I am running MongoDB on this machine, and reads from /dev/urandom are failing. I know reading from /dev/urandom shouldn't fail, so I think this system error may be the underlying problem.Are these two issues connected?If so, is there a way to fix this without having to completely reinstall the OS?
View 5 Replies View RelatedI am a total Noob, I couln't find the answer to my question anywhere. I need to run Matlab with 4GB of RAM and I have been told Fedora 64bits is the best environement for that. I downloaded the iso for the Fedora 14 x86_64. I first booted using the live CD and was surprised to see that only 3.4GB are recognized. The computer is a HP with dual core 64bits intel cpus and the motherboard is supposed to handle until 8GB of RAM, I have currently 2 x 2GB installed.
I thought it might have been a problem from the live CD and I proceeded to install, but still same problem, only 3.4GB recognized. Most threads I have found mention the PAE kernel but from what I understand this only applies to 32bits Fedoras ?
strace wget www.google.com:
...
write(2, "Connecting to www.google.com|74.1"..., 51Connecting to www.google.com|74.125.115.104|:80... ) = 51
socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3
[code]....
i want to put LISA working under my x86_64 but i receive a error because the fault of cpp wich i have in the /lib, so i don't understand that fault
checking for g++... no
checking for c++... no
checking for gpp... no
checking for aCC... no
[Code].....
I have just installed Fedora 12 on my old AMD64 desktop. The install went fine, I then set about adding various useful things like skype, flash plugin- some manually, some with autoten.
Upon rebooting, the system hangs. Looking at the text startup, the last line before it hangs is:
Starting jexec servicesStarting yum-updatesd: [OK]
After this line appears, the display flashes repeatedly then does nothing. It sits there with the text showing (or on graphical startup, the splash screen disappears) and a cursor flashing.
I think the problem may be with the nvidia driver I installed with autoten, which I suspect is wrong for my system (think my graphics card is too old).
Does anyone know how I might remove the driver given I can't get as far as logging in at the moment? Or am I wrong and the problem likely to be something else?
Fedora13 x86_64 not support SATA3, can only degrade switches over SATA2 the slot. Hoped that fedora 14 will support SATA3 the device.
View 6 Replies View RelatedI can not start fedora 15 because i take this message:HTML Code:Starting udev wait for complete device initialization failed, see ' system ctl status udev-settle.service for details
View 2 Replies View RelatedBy default, Fedora x86_64 only installs 64 bit libraries under /lib64 when OS installation! I think, it is not very good because there are so many 32 bit application software, without 32bit library, 32bit application can not run at all! Why Fedora not install both libraries by default, any concern?
View 2 Replies View RelatedI have Fedora 10 x86_64 installed on my Think Pad T61p and when ever I put it to sleep and then try to wake it back up, it doesn't wake back up, all I get is a blank screen
View 2 Replies View RelatedI installed Fedora 10 x86_64 from DVD this weekend. Once the install was completed and I booted into the new install, I ran the Software Update expecting to find and download security updates. However, to my surprise no updates were found! The install DVD was downloaded and burnt to DVD about two weeks ago. Did the installer fetch and install the F10 updates? Or did I mess up my install and/or configuration of F10? I remember when I installed F9 there were a lot of updates found right after the install.
View 14 Replies View RelatedFor the last couple of days I've been trying to install Fedora 11 x86_64 without success on my new machine, specs below. Intel Core i7-920 2.66Ghz MSI X58 Pro 7200 SATA Drive (can't remember the make) 6GB RAM So first off I tried install the 32bit live cd and that worked without any problems and installed fine. Only problem is I need access to the full 6GB of RAM so I really need to switch to the 64bit version.
I downloaded the full x86_64 install DVD and burnt it off. Rebooted and began the installation. It was going fine until it started installing the packages. The install seemed to freeze, although the mouse would still move. I left this for 10 minutes just incase it kick started again, but there was no HD activity or DVD activity so I gave up and rebooted to try again. The next time I started the install I had problems with it freezing while partitioning. I was beginning to think something was up with my hard drive or the drivers for the hard drives controller weren't working correctly (could still be the case).
After about 20 attempts with it freezing at various points I gave up and decided to try the x86_64 live cd. This booted with no problems so I started the install from the desktop. First thing I noticed was a kernel error pop up after I started the drive partitioning. Something about dereferencing a pointer in the kernel (0x20) (sorry no additional info at the moment, if needed please ask). This got me thinking the kernels not playing nice with my setup. However, it let me continue and copied the live image onto the hard drive. Then it started going through the post installation steps and this is where I got another kernel error (again I can get this if needed) and the window froze and all activity seemed to stop again. Has anyone got any ideas what could be causing these problems. I've also tried a CentOS 5.2 x86_64 version I had lying around and this had similar problems (although this does use anaconda as the installer too).
I need to develop application for 32 bit environment.
Before to install FC11 64, I used FC 9 and FC 10 i386 version without any issues.
I'm lookking for a tutorial about use 32 bit development environment in a 64 bit OS.
How or where I can setup FC11 for this features.
Just installed wine from repository.Trying to install a windows application, but getting the following:
$ wine "f:Setup.exe"
Trying to load PE image for unsupported architecture (I386)
Trying to load PE image for unsupported architecture (I386)
[code]...
I have installed last updates about 3 days ago. After this Fedora kernel 2.6.30.9-99.fc11.x86_64 does not start.booting it the last message I see"ADDRCONF(NETDEV_UP):wlan0: link is not ready" then it stops. I have to boot with a previous kernel version 2.6.30.9-96.fc11.x86_64.
View 2 Replies View RelatedI have an issue with kernel-2.6.31.9-174.fc12.x86_64. I ran the updates on Christmas Eve and it updated from kernel-2.6.31.6-166.fc12.x86_64 to kernel-2.6.31.9-174.fc12.x86_64. When I rebooted, I no longer received the Fedora Bubble boot screen. It comes up with the Fedora boot bar (across the bottom). Also, I receive failures during boot with the following:
[Code]...
I just installled Fedora Core 13 for IA64
I installed to disk from the LIVE CD namely
Fedora-13-x86_64-Live.iso
After it was installed and rebooted everything worked fine EXCEPT that yum did not have any repositories!
Can anyone with a successfully working yum on FC13 IA64 please post the contents of /etc/yum/yum.repos.d
I have motherboard Gigabyte GA-M61PME-S2P with nvidia hda sound card and I have no sound output using line in input. I've already tried to compile actual realtek linux driver but it didn't help. It looks ok because using gnome-volume-control I can see that there is music - volume bar is moving - and I can record it but I can't hear that on speaker live. I have also only 2 channel output hardware configuration. Alsa mixer have all channels but changing volume adjust didn't help. some information:
[Code].....
In an attempt to ameliorate some other problems (lm_sensors, and loopback), and based on several forum entries, I decided to update the default f15 kernel (2.6.38.35) using kernel-2.6.39-1.fc16.x86_64.rpm from rawhide. It seemed to install without problems and when I rebooted it seemed to hang just before completing the boot process. The on screen boot messages ended with:
Started Display Manager
Started LSB: daemon for libvirt ........
Starting LSB: suspend/resume libvirt guests on shutdown/boot
[ 12 ......
about a dozen similar lines ending with
[25.030991 hci_cmd_timer: hci0 command tx timeout
then it apparently hangs
However, at that point I can log into to a console using Cntl-Alt-f2, so most, if not all, the crucial boot processes seem to have completed. There is an issue with the nVidia driver that I will deal with by modifying /boot/grub/grub.conf to re-enable nouveau, but I am stumped by what is causing the hang up. There is a certain amount of traffic regarding a similar problem with Ubuntu 11.04, but no solution other than it seems to be related to a BIOS bug (NFI)
what sub-system uses the "hci_cmd_timer" and why it might interfere with the boot process? Has anyone else run into a similar problem with f15?
Is there a better way to get an updated kernel in f15? I do want to keep all the Red Hat patches and back ports, so reluctant to build a kernel from scratch from upstream sources at kernel.org (and maybe just a bit apprehensive ;-})
I have trouble with my Fedora 14 on laptop, that I never had on previous Fedora versions (10-13).The SELinux not allow mplayer to play flv files and I cannot convert any files from flv to mp3.I have all codecs installed.Also Totem not works propely.I can shutdown SELinux (but dont want to) but there still remain (already installed) codec, which cant be found (decoder h.264).So its not matter if I shutdown SELinux because I still cant play flv
Ok so there are my error message (sorry for my english!):
Code:
ffmpeg
ffmpeg: error while loading shared libraries: libxvidcore.so.4: cannot enable executable
[code]...
does anyone know how to play DVDs in MPlayer?
View 6 Replies View RelatedI'm trying to get skype to work on my new system. It seems to install, but trying to run it I get an error message naming a missing dependency. Searching for this with yum whatprovides and installing the result worked in one case, but for the next one, yum install <package containing missing item> returns a few errors of the form:
package <name-version>.fc12.x86_64 (which is newer than <package-version>.fc12.i686) is already installed Is there any way around this? I'd like to get skype working, but am having no luck at the moment. I'd prefer not to remove the .x86_64 packages if I can avoid it in case that breaks something else.
I have configured the Adobe repos and when I try to install Adobe Reader, yum gives me the following error:
Code:
Transaction Check Error: package nss-softokn-freebl-3.12.4-19.fc12.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed I tried --skipbroken as a longshot to no avail. Obviously if I try to remove nss-softokn-freebl it tries to remove all of Fedora , looked in Koji but there is nothing in there either.
This has been happening for over a week and is preventing me from installing updates, They all download OK then as they start to install I get this error message. Test Transaction Errors: package nss-softokn-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-3.12.4-17.fc13.i686) is already installed Then the update fails and I am unable to continue.
I am a complete noob with this OS, I left for a week in the hope it would sort it's self out.
Did anybody tried installing the latest adobe flash named Square for amd64 systems? I was interested in knowing whether there is any improvement in the performance. I also want to know how to replace my existing 32 bit wrapper based flash on 64 bit browser and install this 64 bit flash.
View 5 Replies View RelatedI'm using Mplayer to play movies . And I find that Mplayer always have a pause or jump when it finishes playing one film and starts the next one ( I'm using the command like :mplayer -playlist your_play_list) .So I want to know is there any idea to make it play smoothly ,I don't like the pause or jump when I'm watching movies.
View 6 Replies View RelatedI use Fedora 12 AMD64 , and my daughter use it . and I have tom and jerry in my computer , I like my daughter only use game and learn many thing about computer , but she always see Tom and Jerry and waste time . Can I do something my daughtery see movie in evening .with VLC or mplayer or Script ?I want Fedora do not let him see movie in evening and let him see movie in morning ?I want Fedora disable use VLC or Mplayer in evening and enable it morning .---------- Post added at 06:22 PM CDT ---------- Previous post was at 11:45 AM CDT ----------
View 5 Replies View Related