Fedora :: Why Can't See Video On Crackle.com?
Jan 9, 2011videos and hulu videos play fine. but cracke.com just pulls up a blank black area and does nothing? what might i be missing? using firefox.
View 11 Repliesvideos and hulu videos play fine. but cracke.com just pulls up a blank black area and does nothing? what might i be missing? using firefox.
View 11 Repliesi'm using a m-audio delta 44 card and if i play anything through vlc it sounds great. however my problem is using flash, any sound through flash sounds terrible. all distorted, glitchy and crackly and with lots of white noise mixed in for good measure.i feel like i'm going round in circles now and i'm at the limits of my knowledge. i've tried all the packages i can think of for flash, reinstalling oss numerous times and a different browser but no lucki've been tearing my hair out all day..
Selected mixer 0/M Audio Delta 44
Known controls are:
mon.out1/2 [<leftvol>:<rightvol>] (currently 108.0:108.0 dB)
[code]....
Anyone know what causes static/crackle noise in bluetooth headset. Everytime I listen to stuff on ..... I have this problem. I didn't always have it either. Also viewing ..... video on other site other then ..... it keep like flashing the emblem to add it to a site, but its really quick. I'm using Firefox on Ubuntu 9.10.
View 1 Replies View RelatedI am experiencing a loud crackle sound coming from my speakers at startup. It appears to be the alsa driver because when I disable it the crackle/pop stops. Sound works when playing back music and videos however. Has anyone else experienced this problem? I reported the issue to launchpad, and was told the issue would be fixed in the latest kernel; 2.6.35.2. I upgraded to 10.10.
View 4 Replies View RelatedFor some reason, Pidgin has *always* made a crackling sound before playing the actual event sound on my linux systems. It finally bugged me enough to go tinker with the sound settings. I changed the sound method from "automatic" to "ALSA" and the crackling goes away.
View 3 Replies View RelatedI've recently noticed a really irritating tick tick crackly sound coming from the audio system with intermittent crackles in between them, very irritating.
View 8 Replies View RelatedI am trying to resolve an ongoing fight involving /dev/video node assignment between 2 TV Tuner cards and a USB video camera.
Each time I reboot the three devices seem to shuffle their /dev/video assignment. i.e. what was /dev/video0 (USB camera) after a reboot magically becomes /dev/video1.
This causes all kinds of grief between my MythBackend and ZoneMinder who expect the devices to have static assignments.
how to best solve this? I did a brief search and one solution appears to be to statically assign the devices.
I just came home from a long trip, with a lot of videos shot during the holiday. I wish to share them with the rest of the family and friends, but the files are huge (full HD). I intend to upload them to the family server, so ..... and the likes are not something I want.
View 8 Replies View RelatedTo get multimedia working, or explain what I'm doing wrong.
The problem is that none of the video players doesn't play video, they show only black window and play audio.
I have Fedora 11 Leonidas, fully up-to-date.
I have installed rpmfusion and livna repository.
I have installed following packages:
When I try to play video with totem, it doesn't output any error, but just doesn't play video.
with mplayer:
xine and kaffeine just say:
vlc:
I tried several different files, which works perfectly in windows and ubuntu.
I installed windows binary codecs for mplayer to /usr/lib/codec/
I got a message when streaming video using VLC with profile "Video - H.264 + ACC (TS)" I am using fedora 11 with vlc 1.0.4. Code: Streaming / Transcoding failed: It seems your FFMPEG (libavcodec) installation lacks the following encoder: MPEG AAC Audio. If you don't know how to fix this, ask for support from your distribution. This is not an error inside VLC media player. Do not contact the VideoLAN project about this issue. What packages should I install?
View 3 Replies View RelatedIf any of you have successfully created a video hosting server with Fedora, can you give me any ideas of what software to get and how to configure it and so on? Or, if you have been unsuccessful, can you tell me what doen't work?
View 1 Replies View RelatedI want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies View RelatedI wanted to see the current video stream of oil leak in the gulf but when I go to the page the video is black. When I click on the video it give the error message Quote:
An Error Occurred: Could not write to resource. I am not sure what that means or how to fix it.
I have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
View 8 Replies View RelatedI've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
I have an integrated intel video and latest xserver-xorg-video-intel driver(using only stable repo). Now I wanna watch high-res video. From the bits of info collected from all over internet I understood that I need to:
1.aptitude install libdrm libva.
2.compile or find the .deb mplayer-vaapi and install it.
3.add -vo vaapi -va vaapi to the mplayer command line in gnome-mplayer.
My question : is that correct or did I miss something? Do I have to compile latest libdrm and libva or the ones from the squeeze repo will be good? Do I need kms enabled, i.e. install firmware-linux-nonfree?
I'm looking for a Linux tool that allows me to transcode videos to a video codec that is highly compatible to the Windows platform. We produce large scientific videos from measurements and would like to show those videos during presentations and submit the videos to journals. We want to be as compatible as possible (we can not influence for example the codes installed on the presentation system or on the journal reviewers system).
Virtualdub suggests one of these codecs:
* Radius Cinepak
* Intel Indeo R3.2
* Microsoft Video 1
We tried ffmpeg, mencoder and Virtualdub under wine, none of those tools could produce videos encoded with the aforementioned codecs.
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
is this possible? Or does one have to use the binary blobs?
View 1 Replies View RelatedIf I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies View RelatedI recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies View RelatedI have a video file in which the audio runs faster than the video, so they quickly go out of sync. The way to fix it would be to separate the audio and video streams, speed up the video (the audio is FINE, it's the video that's wrong), and then recombining them. What is the easiest way for doing that?
View 7 Replies View RelatedGot a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?
View 3 Replies View Relatedwhen I try to play any video in mplayer, i only hear the audio .how can I fix it?vlc and totem works
View 14 Replies View RelatedAfter trying ubuntu for an year and suse for a week I finally decided to try out fedora 12. I have a problem with the video. This is what happened, I was watching ..... paused the video and then moved to other tabs finished some stuff and returned back to ..... tab and I noticed that the video is blank. There is some white screen which covered the video part of the page and rest of the page is visible. I don't have any idea why this has happened.
View 1 Replies View Relatedvideo playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
i have a problem with video.when i make full size video from browser or from video player i see only black screen.can anybody help me pls?
View 8 Replies View Relatedthis happens with both VLC and Totem, when in either of those programs playing a video, if I click on one of the top menus, say View in Totem, the video stays on top of the drop down options. In order to see the options I have to hover over them with the mouse at which point they become momentarily visible. I read a post somewhere where someone had a similar problem and it was solved by reinstalling Compiz, but I've tried uninstalling it entirely, reinstalling it, etc. and none of it works. It doesn't happen with flash videos in firefox, it does happen with visualisations in Totem, and it only started happening since I upgraded to 11.04.
View 4 Replies View RelatedOpenSUSE 11.1, 64 bit, 2 cores, intel graphics, 4 GB of RAM:_no_ problems
OpenSUSE 11.4, 64 bit, 4 cores, nvidia graphics, 16 GB of RAM:
Problem is very similar to: Problems playing mkv HD films in opensuse but not windows but with enough differences that I start a new thread:
* playback in VLC does not work -- there is only sound
* playback in SMplayer works, however -- when I scroll forward, the video freezes and sound continues, to unfreeze video I have scroll a tiny bit backward
I tried changing the video ouput driver (in SMplayer) from xv to xv/noveu-nvidia, it didn't help. Please note, that I use the same settings (initially) as before in OS11.1.
the movie i downloaded plays for only 19 sec and stops saying you will be redirected to microsoft download page. the file is 700 Mb. i installed w32 codecs after searching through many threads but still my vlc doesnt play the file.
View 1 Replies View Related