I am using sony vaio vpceb24en it is having functionality of quick web access by spashtop browser but whenever I try use the spastop by quick web access button and try to connect to internet via wifi it is showing no connection but when I scan the network is found but it is not able to connect to net Vaio WiFi.
View 1 RepliesOther than several other problems on my new Sony VAIO I solved with workarounds (it's a terrible machine for working with Linux especially for NVIDIA drivers) I cannot make my microphone working.
Code:
malvasia:~ # uname -a
Linux malvasia.yacme 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64 x86_64 x86_64 GNU/Linux
malvasia:~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC275 Analog [ALC275 Analog] .....
I've found a patch to make mic on ALC275 working but I don't know if it's applicable to 11.3 kernel nor if there is a easier solution to adopt.
On my Sony Vaio VPCF12M1E I have a small but irritating problem: Since yesterday the numeric pad on my keyboard doesn't work anymore. I can use the numbers at the top, but not on my numpad. This happened out of nowhere when I was just setting up an access point. No idea what I did wrong, cause I only configured a static IP Reboot, and numpad was gone. I tried restarting the laptop, I tried disabling and enabling Numlock over and over again. Nothing works.
View 1 Replies View RelatedGot this new Sony from BB on black friday. I also have the pcg-7184l that works fine and the specs looked very similar. Everything seems to work but the touch pad. I am running able to use a USB mouse with no issue. A search online has not been fruitful so now to ask the community. I am willing to start from basics because I am either overlooked something or missing something. On hardware info all I show is the Sony Jogdial and the USB mouse under mouse. That is making me think that HAL is not even detecting the hardware. According to Sony the windows driver is ALPS so for some reason this one is not being detected by the kernel. I had done a clean install and then updates but the touchpad still does not seem to work in Linux but it was working under Windows7 (has since been removed but I do have an image if I have to restore back to windows.
View 1 Replies View RelatedI just did a clean install of the newest version of Ubuntu (11.4?) on my Sony Vaio CW. I was able to use the WiFi at my friends house where I installed it. At home when I entered the pass for the internet it would try connecting and five minutes later be back asking for the pass again. It won't connect at my house or my grandparent's house. They both have a protected internet but my friend does also and I was able to connect to his.
View 3 Replies View RelatedI have a Sony Vaio VPCZ128. It has a NVIDIA GeForce GT 330M GPU with CUDA Technology (SPEED MODE) and Intel HD Graphics (STAMINA MODE) (switchable). The Processor is an Intel Core i7-620M with 2.66 GHz and the Chipset from Intel HM57 Express chipset.
Finally I successfully installed Ubuntu 10.10 (mainly following the advice on [URL] and using his kernel). Every thing is working fine including sound (still a few minor problems with backlight and Fn F5/F6). But I still desperately try to get the internal microphone running.
I just upgraded to 10.10 64-bit from 10.04 64-bit and my external monitor is no longer working properly. Using the "Monitors" function in preferences, it does recognize my monitor and does in fact activate it, but the total available screen real estate is only increased by 10-15 pixels (i.e. my mouse moves to the external monitor, but it stops after 10-15 pixels). Thinking that something went wrong with the upgrade, I backed up my data and did a clean install from CD after format and the problem is the same.
lspci:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code].....
My alsa configuration is here : [URL]... The audio out works fine including the headphones. But I can not get the microphone internal or external to work. Are there instructions for configuring audio on the sony vaios?
View 1 Replies View RelatedI've had such good luck with Fedora (and this Forum), I'm attempting to put F12 on wife's brand new Sony Vaio, a VPCEB11FM, a 64bit system. I downloaded the Fedora-12-x86_64-netinst.iso, made sure it was ok with sha256.exe, then burned the image to DVD. Booted it up and let it default to "install or upgrade an existing system". It dead-ended in a dark blue or black screen. I re-started and examined the other options. Thought I'd try the one that says: "Install system with basic video driver". Got all the way through to where it got ready to start downloading files. Can't get past that point because it attempts to get to the Internet using the Sony's wireless card! Why would it try the wireless when there's a wired NIC card in this PC that requires no special driver etc. How to proceed from here?
View 3 Replies View RelatedI just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
[Code]...
I've been trying to install Ubuntu 64bit on Sony Vaio CW and the Screen is 14 inch when I boot from CD it seems to work normal but after i select "Try Ubuntu without installing" or "Install Ubuntu" then the screen goes black like nothing happening but the CD runs for while then stop. Again I reboot to try again this time I press F6 then select "nomodeset" and it boots fine I was happy though, after installation success when I boot again WTF it goes black again and then I reboot and press "E" during the options that showing to select OS then I remove "Quit Splash".
I guess then I add "nomodeset" and control+X to boot, it works fine. So when I log in and of course I activate the Nvidia Graphic Driver then I reboot and WTF again the screen was out sync or something like the the screen didn't show properly. The Application menu normally is on the upper left of the screen but this time it was on the center of screen and the Shut down button came to the left side and i have to move the mouse cursor to the right and then it would appear on the left just like the resolution is to big for the screen.
I have a Sony Vaio VGN-FZ340E. I installed Ubuntu about 6 months ago and had a problem-free time with it. I then got busy with other stuff (house work, etc.) and hadn't worked on Ubuntu for about a month. Now I switch on my Vaio with Ubuntu and I find the screen is just too bright.Since 10.04 was just coming up, I thought this would be fixed when I update. I updated, but the screen is still too bright.
I searched the forum for answers and found only some pretty old threads which were about the Fn key combos (which, obviously, doesn't work), spicctrl, etc.So I followed the instructions here. I did just what Step 1: Checking for Module says, but Terminal just doesn't give any output.
I just got a new Sony laptop running the I7 Q740m Quadcore with 4m ram w/ WIN 7 Home. I want to run Ubuntu in a Virtual machine. I am wondering if Virtual box is a good choice, or what other VM I should use? Also which version of Ubuntu, 10.10 64bit or 32bit? Would an older OS be more stable?
View 2 Replies View RelatedI just installed Ubuntu on my Sony Vaio VPCEB23FM. However, when I tried to watch videos, there was no sound coming out. I went to [URL] and tried out the link in post #5, but that completely got rid of my sound card and I no longer have any version of ALSA.
Code:
[anurag@Anurag-Vaio:~$ aplay -l
aplay: device_list:223: no soundcards found...
anurag@Anurag-Vaio:~$ lspci -v
[Code]....
I have decided to switch from Vista to Linux on my Sony Vaio and wanted to know the best way to do it.
Basically i want to set my laptop like this because i want to get involved with wireless security testing.
I am thinking about taking the Backtrack wifu course http://www.offensive-security.com/on...backtrack-wifu.
Now obviously it seems i will need Backtrack, so what is the correct way to go about installing? Should i try and purchase a cd to install or is there better ways?
Cannot wait to move away from Vista. I think it has been making me ill. ps.. i also want to learn BASH and Perl, so that is basically going to be the setup.
Looking for opinions on what is the best way to disable the touchpad on a Sony VAIO. I just installed Slack64 13.1 and love it...
View 10 Replies View RelatedI used to have an Ubuntu-Windows partition, but (what do you know?) Windows Crashed, and wouldn't boot anymore. So I reinstalled Windows, deleting my Ubuntu partition. Instead of reinstalling Ubuntu afterwards, I decided to give Debian a try. So here I am. I can't find drivers for my wireless network however, and it's quite annoying to have to plug in the Wired Connection with which I am writing this.
My main specs are:
Sony Vaio VGN-CS390J
Debian 5.04
AMd64
Ethernet, bluetooth and video work fine. I also managed to get the wireless card working by installling "firmware-iwlwifi". I can make the touchpad work sending to the kernel the parameter "i8042.nopnp" at boot time(grub), but then I get the computer frozen for a second every five second so I decided to use a usb mouse, until I get another fix.As you can see I can use the laptop except that...I have no sound at all, I can only hear something using headphones.I've been searching the web but the only thing I found is a fix in ubuntu using some kernel-modules from backports repository, but can't install them on debian.
View 2 Replies View RelatedI tried to installed OpenSUSE 11.2 "i586" on an older Sony Vaio laptop (model PCG-XG9) with 20 GB HD and 128 or 256 MB RAM. There is no ethernet port, but I have a PCMCIA WLAN card "Cabetron RoamAbout 11 Mbit/s", which should work perfectly with any Linux. The computer had Win98 on it originally (which, of course, after all installation attempts is now destroyed). The problem is that I cannot install to the end at all - no matter what I try:
1) Having the disk as a single FAT partition (made by a Win98 installation CD), it appears that the installer cannot create the correct partitions needed for Linux.
2) Having deleted the DOS partition with FDISK from Windows98 - which is like buying a completely new, unformatted HD from a store. But again, it cannot automatically set the partitions...
Is there a manual / instruction page somewhere how I should partition the disk manually (how to do it, and what sizes are recommended for each partition)?
i bought the new sony notebook the specs are Sony Vaio VPC-Z12Z9E Intel i7-620M, 8192MB, 4x64GB SSD, 13.1" WUXGA (1920x1080), Win7Pro, NVIDIA GeForce GT 330M und Intel GMA HD, GLAN, WLAN (300 Mbps), Bluetooth, Webcam
the notebook have 4 ssd cards in raid 0 - its an intel software raid but suse recognize it and i am able to install it. kde or gnome installation is success but a boot loader cant be installed. i can life with - start install, cancel and start the installed system. but nothing found. also i could enter the dev name for boot but what dev is that.
everything works but audio. I tried the audio levels, everything. Is there an ATI driver I can download for audio?
Here is my lspci output:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Sony Corporation Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
[code]....
Anyone got the RS880 audio out working?
I have a Vaio M13 M1E, and I'm trying the Linux Mint 10 (Julia) DVD, via a bootable USB stick created Universal USB Installer, but the wireless isn't working.On the other hand, trying Ubuntu 10.10 Netbook it works fine - given that Mint is a variant of Ubuntu, I'd have expected it to work the same.I've tried searching, but not found anything relevant, so anyone have suggestions on what to try?
View 1 Replies View RelatedI am having problems with the brightness control on my sony vaio laptop, at virst when i upgraded the driver for the VGA card the whole screen went blank, I had to port a bin file from windows and write my own EDID file to get it to work (nVidia GT 230M), but I am having problems with the brightness, although ubuntu does read the input from the keys (FN+...), the brightness refuses to change, adding the brightness applet to the taskbar does not work either. I really need to be able to change my brightness because the battery usage is off the charts.
View 1 Replies View RelatedCant install it or event boot it to try, because when i choose to install or test it the scene goes blank. I had the same problem when I had the older version but solved it whit using the custom eidi or whats is called and changing xorg.conf. But I saw that nvidia had posted the drivers for GeForce gt 330m on its site for 32 and 64 bit Linux drivers so i wanted to try the newest ubuntu. The thing is that i cant event install it or anything, so i cant use the eidi method either.
View 9 Replies View RelatedWhen I try to install Ubuntu or (having installed using Wubi) boot Ubuntu, I get a blank screen and no activity. This problem has been addressed many times but I haven't been able to get any of the proposed solutions (e.g. nomodeset, i8042.nopnp) to work. Is there another Linux or Unix-like OS that is known to work with this hardware?
Sony Vaio Y (VPCY)
NameIntel(R) HD Graphics
PNP Device IDPCIVEN_8086&DEV_0046&SUBSYS_9076104D&REV_023&115 83659&0&10
Adapter TypeIntel(R) HD Graphics (Core i3), Intel Corporation compatible
Adapter DescriptionIntel(R) HD Graphics
[Code].....
i'm trying to install ubuntu on a sony vaio. Unfortunately i cannot boot from a cd on which i have burnt the .iso file of ubuntu. The only way i managed to install ubuntu was by creating a usb bootable stick, but here also that doesn't work so well. My workaround was to use virtual clone drive which is freeware to simulate a cd rom in windows and get the iso file started. By leaving the bootable usb stick in the computer in this way it worked...
So in the end i have grub and can load ubuntu and win xp, but then by trying to format the harddrive i kind of messed things up and had to reinstall windows. Because the DVD drive only reads original cds. So from there i will attemp to reinstall ubuntu again. But how can i get rid of win xp afterwards ? If that CD Rom would only read burnt cds or if it would habe been possible to boot from usb then i wouldn't have this trouble.
I am having a problem with my new laptop Sony VPCEA1S1E. I installed Ubuntu 10.04 LTS and since then I cannot hear any sound. I have tried a lot of things before posting in here but nothing seems to work. From changing the module value in the alsa=base.conf file to installing the updated alsa drivers (drivers,utils,base}. I have also checked the alsamixer so that nothing is muted. I am struggling with this problem two days now and it does not look like I am getting somewhere. The various postings I have read so far did not work for my case.
A few things which might be useful at first:
card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0 .....
Advanced Linux Sound Architecture Driver Version 1.0.23.
Compiled on Oct 5 2010 for kernel 2.6.32-24-generic (SMP).
I'm having trouble with 802.11n as of late in Ubuntu. I know my wife's computer used to connect faster but it seems to not be able to go over 54 Mbit in 10.10 any more either. Laptop is a stock Sony Vaio VPCZ12CGX/x which has an Intel Advanced-N 6200 card.
LSPCI output: 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
I can connect to the 2.4Ghz channel or the 5Ghz channel on my wap both are capable of up to 300Mps as per its configuration but neither go over 54Mbit. Both do about 160Mbit from this same location in Windows. Moving closer makes no difference.
I'm having a hard time fixing the sound on my Sony Vaio Vaio VPCEE25FX/WI. Headphones work for some reason, but speaker doesn't.
View 1 Replies View RelatedMy wireless connects and then in a few seconds disconnects and then again connects..... and so on.
And even it seems to be connected I cannot reach any website. Could you please help me?
Below there are some information probably needed
1 ) Machine Brand and Model (PC/Laptop): Sony vaio VPCM13M1E (Netbook)
2 ) Wireless Brand, Model and Wireless Chipset: (I believe it should be one of these)01:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe 02:00.5 Ethernet controller: JMicron Technology Corp. JMC260 PCI Express Fast Ethernet Controller (rev 02)
3 ) check interface:
a) ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 90:fb:a6:fe:ce:3d
[Code]...