want to set up snort on my F13 home computer.Is there a simple way to do it or do I have to do it the hard way (compiling and stuff) ?I want to use snort for intrusion prevention and detect possible threats from internet.
View 3 Repliesdoes anyone know of a good tutorial on how to set up and configure snort 2.8.5.2 on a ubuntu 10.10 system.I have been trying to set up snort and have run into alot of problems setting up the config file and the rules. It works in sniff and packet log mode but i cannot seem to set up IDS mode correctly. There is alot of different info on the net but not much help. There seems to be alot of work involved in setting this up which i do not mind provided i can find the proper documentation to configure the set up.
View 9 Replies View RelatedI need assistance with my Snort Installation. I used Bodhi Zazen's Network Intrusion Detection System post and found it easier than the previous time I had done it. I am currently running Ubuntu 10.04 server and Snort 2.8.6.1 with BASE 1.4.5. I followed Bodhi Zazen's instructions and when I tested snort it ended with a Fatal Error due to ERROR: /etc/snort/rules/exploit.rules(264) => 'fast_pattern' does not take an argument
Fatal Error, Quitting.. Here is the entire output once I ran the test command: snort -c /etc/snort/snort.con -T Running in Test mode
[Code]...
I am trying to get snort running but I get this with service snortd status:
snort dead but subsys locked
service snortd restart
Stopping snort: [FAILED]
Starting snort: [ OK ]
[root@Fedora tylerm]# tail -f /var/log/messages
Mar 4 05:17:54 Fedora kernel: device eth0 entered promiscuous mode
Mar 4 05:17:54 Fedora kernel: device eth0 left promiscuous mode
Mar 4 05:17:54 Fedora snort[3280]: Initializing daemon mode
Mar 4 05:17:54 Fedora kernel: device eth0 entered promiscuous mode
Mar 4 05:17:54 Fedora snort[3282]: PID path stat checked out ok, PID path set to /var/run/
Mar 4 05:17:54 Fedora snort[3282]: Writing PID "3282" to file "/var/run//snort_eth0.pid"
Mar 4 05:17:54 Fedora snort[3282]: Daemon initialized, signaled parent pid: 3280
Mar 4 05:17:54 Fedora snort[3280]: Daemon parent exiting
Mar 4 05:17:54 Fedora snort[3282]: FATAL ERROR: OpenAlertFile() => fopen() alert file /var/log/snort/alert: Permission denied
Mar 4 05:17:54 Fedora kernel: device eth0 left promiscuous mode
Mar 4 05:18:42 Fedora ntpd[2300]: synchronized to 128.10.19.24, stratum 1
Mar 4 05:18:42 Fedora ntpd[2300]: time reset +0.906114 s
Mar 4 05:18:42 Fedora ntpd[2300]: kernel time sync status change 0001
I am currently running snort as an IDS on the same machine that acts as our gateway. I installed it using sudo apt-get install snort. However, I'd like to make it run as an IPS. Is it possible to convert that currently running snort instance from running as an IDS to an IPS without having to download the snort tar balls and install it? I do not want the tar balls because during updates and upgrades, I'd like the whole OS and installed apps (such as snort) to be upgraded.
View 1 Replies View RelatedHow to enable ipv6 in snort. I read that it must compilate with --enable-ipv6 but still don't know how?
View 2 Replies View RelatedI work in a relatively small organisation of about 30 people (but with a complex network) and we've been looking to move our firewall to Microsoft's Threat Protection Manager on a mostly Windows network. I've been thinking we should have an IDS/IPS inside the firewall and I've been thinking about Snort in NIDS mode but have some basic questions:
1. Can anyone recommend a good web GUI for Snort?
2. Is it advisable to run both on the same machine? (Both from a POV of security and resources.)
3. Would Snort add any real benifit to using TPM?
I have installed snort + mysql + acid base, I add some rules into /etc/snort/rules/local.rules to test the alert:
alert icmp 192.168.1.20 any -> 192.16.1.21 any (flags:A;ack:0;msg:"NMap icmp ping")
alert icmp 192.168.1.20 any -> 192.16.1.21 any (content:"abcdefgh";;msg:"ping de windows")
alert icmp 192.168.1.20 any <> 192.16.1.21 any (flags: S; msg: "HOULA SYN Packet!"
After I restart snort and I tied 2 pc by cross cable (192.168.1.20 for windows and the victim is 192.168.1.21 for Linux where the snort is installed), my HOME_NET 192.168.1.21 and the EXTEREL_NET !$HOME_NET. The problem is when I run:
snort -dvi eth0 -c /etc/snort/snort.conf
I see the packet transmitted and received (the received conten "abcdefgh" ), when I stopped snort CTRL+C I don't found any alert in the result!!! Run time prior to being shutdown was 218.523030 seconds.
Packet Wire Totals:
Received: 1346
Analyzed: 1342 (99.703%)
Dropped: 0 (0.000%)
Outstanding: 4 (0.297%) .....
dcerpc2 Preprocessor Statistics
Total sessions: 0
database: Closing connection to database "snort"
database: Closing connection to database "snort"
Snort exiting
I am running Lucid on this machine, but I have had this problem on every machine with Snort. When I awaken the system from suspend or hibernation, snort pegs out one of the CPUs.
View 4 Replies View RelatedI am running karmic koala with a recent install of snort 2.4.8.1(build 3 and i am at a loss for useful commands in solving an internal problem(within the network).All i have is `"sudo snort -v -i wlan0" on my very short list of useful commands regarding ids.It is doing little to no good in resolving my problem with a network snoop besides showing that it is running;i need some more weight (knowledge) in order to rectify the problem?
View 4 Replies View RelatedI have just complied Snort 2.9.0.4 under Ubuntu 10.10 x86_64 installed with all Lamp package.The syntax i used to compile Snort as follows below
[Code]...
I'm looking to possibly need to make use of snort and its packet filtering/inspection abilities to help cover for PCI. I've searched Amazon, but nothing really stand out, there is a new one (2007 - Snort Intrusion Detection and Prevention Toolkit), or slightly older ones... Managing Security with Snort & IDS Tools - 2004, Snort Cookbook - 2005, Snort for Dummies - 2004.
Now i'm tempted in just going for the latest one, but i'm completely new to snort so perhaps it needs another book like snort for dummies to get started ;-P
I was wondering whether or not it is possible/advisable to install and run Snort on a single laptop with a wireless router (firewall enabled)? Does Snort require root privileges and are there any other issues one needs to be aware of when installing and running software like this?
View 6 Replies View RelatedUp until recently, as in a few days ago, I was using Ubuntu and had ufw managing the firewall.It's been "recommended" that iptables itself be used. Where do I do the rules go (as in a file) and how do I call those rules at startup?
View 6 Replies View RelatedI have a removable USB drive formated with NTFS. I enabled all the samba boolians in the SElinux GUI but it still doesn't seem to work. If i put it on permissive it will work. What more is there that i need to do to get my directories to show up on samba with selinux enabled?
View 2 Replies View RelatedI have been trying to setup IPSEC encryption between two linux boxes. I have a server application which runs on Linux Box A and a client application which runs on Linux Box B. The client sends the data to server. I have captured wireshark logs at both server and client end. In the wireshark logs I can see that the Box B send ESP packets to the Box A.
But the server Application running at Box A is is not able to get any packets. If I turn the policy off at Box B, Box B sends normal UDP data packets to Box A, but still the Server Application running at box A doesn't get any packets.( Expected behavior since policy at Box A enforces that all packets coming from Box B should be encrypted.)
If I turn the policy off at Box A and Box B both, the server application receives the unencrypted data which is also expected behavior. But when the policy is turned on at both the boxes the encrypted packets reach the Box A but are not delivered to the server application. If anyone has faced such issue please help me to debug this issue. I have attached the ifconfig and policy settings at Box A and Box B for your reference.
I am trying to set up Protected Web Directories on my server Fedora8 32bit I have webmin 1.5 and there is Protected Web Directories option, so I follow instructions and setting up all what is asked, in dir what I need to protect shows up 2 files:
[Code]...
Is there a way to delete files on the commandline that uses the KDE-Wastebin?It appears that I never ever need the KDE4 Wastebin for files that I deleted through Konqueror or Dolphin. It is only when I delete files on the konsole with rm that I wish I could undelete them. It always happens like that, mostly by being in the wrong directory or using a wildcard when I should not have. (I don't have any erroneous deleted file right now, and I do have plenty of backups, but I just wonder whether there is something better than rm to use generally on the commandline.)
View 9 Replies View RelatedI am running Debian 5 and I'm trying to install and configure SNORT. My first stop is to Snort.org where I check out the directions. They tell me I need Libpcap, PCRE, Libnet and Barnyard. I've looked at the Debian Snort installation guide, and I've noticed that most the documents are really old...
I've actually got libpcap and PCRE installed and now I'm trying to figure out how to get libnet installed. It seems more tricky. I think it's the oldest api I've seen.
I guess my main area of question is if there is a better way of getting Snort up and running... I had a previous version of Linux where I install just Snort and I had network packets streaming across the screen, but that's not very helpful as I need some kind of interface so I know what the hell im looking at.
So should I follow the instructions on Snort.org as well as the "Debian, Snort, Barnyard, BASE, & Oinkmaster Setup Guide"? Or does anyone know a more up-to-date guide for Debian users?
How can I install snort in Ubuntu 10.10 and how can I use it?
View 1 Replies View RelatedI normally install programs with yum but I have to download barnyard as a requisite for snort to detect instrusion attempts.I downloaded barnyard and ran ./configure, make, make install, etc.Where does the program get installed? I was running this as root so does it install it into /root/barnyard?
View 5 Replies View RelatedI'm using on my PC the firewall NuFW and SNORT. Snort send alerts when he detects a pornographic website. I would like that NuFW create an ACL to drop this IP. Can SNORT do this or must i do a program wich listen the Snort's port to catch the ip and write it in the ACL file of NuFW?
View 3 Replies View RelatedCode:
test@denial:~# ps -e | grep snort
18470 ? 00:00:00 snort
how do i disable snort daemon at start up? i only want it to be running when i want it to be running.
When i setup snort default listen on eth0, now i want change to eth1 set default listen interface.
View 11 Replies View RelatedI am trying to install snort on debian linux. The following error appears ERROR! Libpcre library not found. Get it from [URL].. I have installed the Libpcre3-dev library but the error is still on.What could I be doing wrong?
View 5 Replies View RelatedAccording to tutorial for installing snort in CentOS, downloaded from CentOS or snort site, I installed snort using:
Code:
./configure -with-mysql-libraries=/usr/lib64/mysql/ --enable-dynamicplugin --enable-ipv6 --enable-zlib
make
make install
[Code].....
I've been looking at setting up truecrypt on my laptop, but the guides on the truecrypt site and the ubuntu documentation seems to be incomplete or not address what i want to do.
What I have:
dual boot windows 7 / Ubuntu (lucid)
What I want is to dual boot with the hidden OS system:
Windows 7 (plausable)
Ubuntu (plausable)
Ubuntu (hidden install)
Is this possible? or is it better to make a hidden /home partition?
I am a Linux newbie so please bear with me if I sound stupid. I was checking out how to set up a firewall for my system and landed on this webpage: [URL]. But I am so confused with how this ufw application works. What I understand is that once I set it to "default deny" it prevents unauthorized incoming connection but what does it mean when the author says to add exceptions for services I need? When do I need to do that? Also what's an SSH server?
View 2 Replies View RelatedI have just installed SSL certificate for my private domain (it runs on a private ip in a local network). I got the trial SSL from thawte. I have successfully installed the certificate.
View 1 Replies View RelatedI'm learning to secure my server in the best way I can think of: By learning to attack it. Here's what would like to accomplish. I have SSH set up on a linux box in a offline lab environment.
Username: root
Password: ajack2343d
Now, I know I can simply brute force this as I know the password, but there has to be other ways, and I wish to learn them.