Fedora :: ROOT Device Not Found?
Jan 26, 2011i am really facing too much problems with fedora 14.yesterday due to low battery my lapi turned off n when i rebooted.
i got a error:-"NO root device found,boot failed...sleeping forever..
ADVERTISEMENT
Fedora Hardware :: No Root Device Found?
Aug 14, 2010Error : no root device found. booting has failed, sleeping forever.
View 1 Replies View RelatedFedora Installation :: F12 LiveCD "No Root Device Found?
Nov 17, 2009When I try to boot from Fedora 12 LiveCD system halts with the messages: "No root device found" "Boot has failed, sleeping forever"
View 14 Replies View RelatedFedora Installation :: No Root Device Found, Boot Failed With 12?
May 20, 2010I have installed Fedora 12 on my HP laptop which has got a NVIDIA graphics card. I have got latest F12 kernel 2.6.32 as well as default kernel 2.6.31.I have installed Nvidia Proprietary Drivers and modified grub.conf file for 2.6.32 kernel saying blacklist nouvaue so that it can load NVIDIA drivers ...After that I am able to successfully boot into 2.6.32 kernel with Nvidia Proprietary Drivers.Everything seems to be fine .. But suddenly today when I tried to boot into F12 2.6.32 kernel I got the following error
Code:
No Root Device Found
Boot Failed, Sleeping Forever
[code]...
Fedora Installation :: Repartitioning Failed - No Root Device Found?
Feb 19, 2011I didn't like my partitioning layout so I have repartitioned and reformatted the drive. I have copied the backed up back onto the hdd, and i have installed grub successfully. Still, when I boot the machine, I get an error message: "No root device found. Boot has failed, sleeping forever.". When installing GRUB, it managed to found /boot/grub/stage1 without a problem, and I have installed it onto the MBR
View 7 Replies View RelatedFedora Installation :: F12 Upgrade - Boot Failure / No Root Device Found
Jun 1, 2010I'm a long time Linux user. Finally got around to upgrading my Fedora 11 system to Fedora 12 by using the 'preupgrade' tool. The upgrade appeared to go well (downloaded packages, rebooted into installer, etc). However, now that the upgrade is complete, I'm unable to boot my system.
Here's my configuration:
/dev/sda (80Gb)
200Mb /boot partition (ext3)
52Gb / partition (ext4 - managed as logical volume)
2Gb swap partition (managed as logical volume)
20Gb /spare partition (ext3 - managed as logical volume) .....
All worked fine under Fedora 11 for the last few months. Grub now presents me with 'Fedora' and 'Windows XP' boot options. The /boot/grub/menu.lst file is essentially the same as it was for Fedora 11, except for the different kernel versions, etc. The boot sequence shows the Fedora bubble (??) and gets about 80% full when the screen goes black and the message displayed is:
No root device found
Boot has failed, sleeping forever
If I boot Windows, all works fine.
Am able to boot using a SystemRescueCD disk. The disks all look okay and I can mount/modify all partitions, etc. The grub menu.lst file read as follows (sorry, typed in, not copied):
default=0
timeout=10
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.32.11-99.fc12.i686.PAE)
root (hd0,0) .....
Fedora Installation :: Install Ok - But Boot Failed - No Root Device Found
Nov 21, 2010I have 2 Debian OS's and wanted to put Fedora next to it.
Install went ok, but after rebooting it says: "No root device found. Boot has failed, sleeping forever."
During install from the live CD I didn't "v" the boot (efi or something?) because I thought Grub would take care of everything.
Should I just reinstall again and choose the Fedora bootloader? Won't it mess up Grub?
Fedora Installation :: Failure Screen Goes Black And Saying No Root Device Found?
Jan 14, 2011I insert my F14 CD and booted the computer; I see the beginning of the installation and the the screen goes black and says:
No root device found.Sleeping forever. Boot failure.
Fedora :: Error - No Root Device Found. Boot Has Failed, Sleeping Forever
May 7, 2010I have a Feadora 12 Live CD. It booted up fine on my 700 Mhz computer. I've since then put a new HDD in with which I intended to install Fedora on. But now i get this message
Quote:
No root device found. Boot has failed, sleeping forever
What does this mean? How do get the Live CD to boot?
Fedora Installation :: No Root Device Found, Boot Has Failed, Sleeping Forever?
Feb 8, 2011I downloaded fedora 14 64 image then created a bootable flash drive and put the image on the flash drive. I rebooted and tried booting from the flash drive and that's the message I received. What do I do?
View 6 Replies View RelatedFedora :: Booting: "no Root Device Found"?
Mar 10, 2011have been fiddling! moved my partitions around (without using any cd by installing grub2 to boot to an iso of gparted).I moved:
swap,ntfs,ext4(fedora13)
to:
swap,ext4(Fedora13),ext4,ntfs,unformated
[code]....
General :: Kernel Cooking: No Root Device Found Sleeping Forever?
May 3, 2011I've taken the kernel 2.6.33.3 and edited the .config file to take out most of the compatibility etc. that I will not be using. I'm run the makes and updated grub. I go to boot it runs through most of the way until I get the following:Quote:/bin/plymouthd: symbol lookup error: /bin/plymouthd: undefined symbol:ply_chara could not read byte from child: SuccessNo root device foundBoot has failed, sleeping forever.'m fairly new to Linux and still more of a dabbler. (Though this seemed more difficult than "Who is root" so I didn't put this in the newbie thread.)Any ideas for what might be wrong?I've tried looking in the config file from something that relates, but they have all been included (Y) in the module.
View 2 Replies View RelatedSUSE / Novell :: Fails To Boot From QLogic Fibre Channel Card - No Root Device Found
Oct 31, 2010We have a SuSE/SLES 9 server that boots from a fibre channel card, using volumes from a NetApp filer.
We previously had the server booting from the LUNs on the filer, but after some tinkering around with the fibre channel BIOS, we have the situation where the LUNS seem to be mounted, the OS boots, starts to initialise everything but then stalls, saying:
We have tried loads of combinations of settings in the BIOS and fibre channel BIOS without any success or any idea what may have caused the error.
Fedora Installation :: I2O Controller - No Volume Groups Found Volume Group "VolGroup00" Not Found Unable To Access Resume Device
Apr 8, 2009Dual PII 400, 512Mb with a Promise SuperTrak 100 IDE Array Controller. At present I have only one drive on the controller, configured for 1 JBOD array. I install FC9 with no problem. New partition is created and formatted, Grub is installed, and then... Grub is found and booted, but then I get:
Reading all physical volumes. This may take a while... No volume groups found Volume group "VolGroup00" not found Unable to access resume device (/dev/VolGroup00/LogVol01) mount: could not find filesystem '/dev/root' I can boot in rescue mode, chroot to the installed system. I changed the kernel boot parm "root=/dev/VolGroup00/LogVol00"
Fedora Installation :: 14 - No Bootable Device Found?
Nov 10, 2010I am trying to install fedora 14 from live CD (USB boot) in my system which already has Windows 7. The installation goes fine however when I reboot the system I get 'No bootble device found' error. install fedora on the entire hard disk which I cannot do right now.
In Bios there are 'Native' and 'Legacy' options for 'ATA/IDE Mode' and if I select 'Native', 'Configure SATA as' option is enabled with options 'AHCI' and 'IDE'. I reinstalled fedora with all possible configuration, Legacy mode, Native + AHCI, Native + IDE but got the same error when booting. I have also tried options; MBR on /dev/sda and first boot record on /dev/sda5.
fdisk -l :
Device Boot Start End Blocks Id System
/dev/sda1 2048 78782463 39390208 5 Extended
/dev/sda2 78782760 211897349 66557295 7 HPFS/NTFS
[Code]....
Fedora Hardware :: Can't Mount Device - Kingston USB Not Found
Jul 27, 2011Fedora 14 is used throughout the whole problem. The problem started when I wanted to install Fedora 15 DVD by making a bootable USB key. The size of the USB stick is 8 GB. The problem happened when I (following the tutorial) wrote the line [URL]... livecd-iso-to-disk command associated with the path to the ISO DVD and the partition on the USB stick. the USB stick has the device name /dev/sdb , 1 partition sdb1.
I then noticed that it was mentioned to unmount the USB drive before doing this command. so, while the terminal had written in it "Checking" , I pressed CTRL+C to stop the execution and then pressed on the arrow beside the device in the computer window (Which I think that it unmounts the device). The actual problem started here. I then tried to mount the device but couldn't, It said the device was not found. so I removed the drive and inserted it again, the OS didn't automount the USB drive, I tried to manually mount it but it said the device is not found or doesn't exist. then I used fdisk -l, It said that the sdb didn't have a valid partition table. Also the size of the device is wrongly reported. It should be 8 GB but it is reported to be 2 TB?!
[code]....
I think the wrong partition table made it think that it has a certain number of sectors which isn't real,that made it think that the device is 2 TB large....
Red Hat / Fedora :: Pvcreate /dev/mapper/disk_bin : Device Not Found?
Feb 28, 2011I'm facing a problem on Boot on San installation, Os is installed, now I'm trying to define mapper device
for others lun/disk with alias for multipath references
Code: # pvcreate /dev/dm-14 /dev/mapper/disk_bin_rac
Device /dev/dm-14 created
[code]....
Fedora :: Udev Rules For Using USB Device Not As Root
Oct 15, 2010Having finally made the switch from Windows (7 Professional) to Linux (Fedora 13) on my laptop, I'm now trying to get all my devices working, specifically an Olympus VN-4100PC Digital Voice Recorder. I've installed odvr and it works in root, but not as a normal user. The installation instructions say: odvr *requires* access to the user-space USB interface.
It is recommended to place "41-odvr.rules" into "/etc/udev/rules.d" or setup your own udev rules rather than running odvr as root. After changing udev rules, don't forget to run "udevcontrol reload_rules" and to replugin your DVR. Again, root privileges are required unless udev is properly setup. The file "41-odvr.rules" (designed for Ubuntu) has the following content:
SUBSYSTEM=="usb", SYSFS{idVendor}=="07b4", SYSFS{idProduct}=="020d", ACTION=="add", GROUP="audio", MODE="0664"
I tried just doing what it said and copying it to "/etc/udev/rules.d" but it didn't seem to work. Looking at other files, I then changed it to:
SUBSYSTEM=="usb", ATTR{idVendor}=="07b4", ATTR{idProduct}=="020d", ACTION=="add", GROUP="audio", MODE="0664"
And now if I do "ls -l /dev/bus/usb/002", I get:
crw-rw-r--. 1 root audio 189, 134 Oct 15 01:21 007
Which seems to suggest that it is running the "41-odvr.rules" file, since lsusb gives:
Bus 002 Device 007: ID 07b4:020d Olympus Optical Co., Ltd Digital Voice Recorder VN-240PC
But odvr still doesn't work as a normal user, giving:
Failed to open Olympus device: couldn't claim interface
Fedora :: Unable To Find Root Device In 14?
Jan 17, 2011out in finding root device of fedora 14. I've windows XP and fedora 14 installed on. this is the output for blkid
/dev/sda1: UUID="962C8EA82C8E834B" TYPE="ntfs"
/dev/sda5: UUID="262C06BF2C068A4F" TYPE="ntfs"
/dev/sda6: UUID="cbcf539a-dee1-4f2f-b68c-ce315ae76e0f" TYPE="ext4"
[code]...
Fedora :: Unable To Find Root Device Booting 14?
Mar 19, 2011I've installed Fedora 15 with Fedora 14 already installed in other partitions, but now I can't boot Fedora 14 as it prompts "no root device found", these are both grub.confQuote:
#boot=/dev/sda
default=0
timeout=120
[code]...
Fedora Installation :: Preupgrade - Previously Installed Root Not Found?
Jun 14, 2010I'm having a problem going from F12>F13 using preupgrade with a wired internet connection. The current F12 installation is up to date. The upgrade crashes with the "the root for the previously installed system was not found". I've also tried upgrading using YUM and was also unsuccessful. Has anyone run into this problem with this upgrade?
View 6 Replies View RelatedRed Hat / Fedora :: Extending Root Partition - Volume Group Not Found
Sep 20, 2010I am trying to extend my / size as its full. Well the volume group is VolGroup00 & logical volume is LogVol00 but when. I run the command vgextend VolGroup00 /dev/sda8. It says volume group not found. Can it be because I have WindowsXP in my /dev/sda1, which falls under same Volgroup??
View 1 Replies View RelatedGeneral :: Ubuntu 6.06: Mounting /root/sda1 /root Failed: No Such Device
Jan 22, 2010An old machine in our office, running Ubuntu 6.06 all of a sudden will not boot up. I get the following info during boot:
Uncompressing Linux... Ok Booting the kernel
mount: Mounting /root/sda1 /root failed: No such device
mount: Mounting /root/dev on /dev/.static/dev failed: No such file or directory
[code]....
I haven't changed anything on the system as far as I'm aware, and I ran some HD diagnostics and everything seems fine. however when I try to mount the drive with the following command:
sudo mount -t ext3 -o rw /dev/hda1 /mnt
I get the following error:
mount: wrong fs type, bad option, bad
superblock on /dev/sda1, missing code
page or helper program, or other error
In some cases useful info is found in
syslog - try dmesg | tail or so
I ran fdisk -l and it says the partition type is Linux. The output after running dmesg | tail :
[12207.483801] init_special_inode: bogus i_mode (101)
[12207.483809] EXT2-fs: corrupt root inode, run e2fsck
[12260.427078] init_special_inode: bogus i_mode (101)
[code]...
Update: After running e2fsck -p /dev/sda1, I get the following info:
/dev/sda1: clean, 142449 / 9584640 files, 5402711 / 19161520 blocks
General :: Can't Find Boot Device - Error "Unable To Determine Major/minor Number Of Root Device"
Mar 17, 2011I just compiled my first own kernel (I'm using Arch Linux), following the tutorial on the german site. Now I tried to boot it, I ended up failing with this message: Code: Waiting 10 seconds for device /dev/sda1 ... Root device '/dev/sda1' doesn't exist, Attempting to create it. ERROR: Unable to determine major/minor number of root device '/dev/sda1' Here is the important part of my menu.lst:
[Code]....
I simply copy&pasted the Arch-entry, i.e. I also had the disk by uuid there. The failure message was the same, just the root device name was the different name Also, at first I did not have the initrd line in my menu.lst (as written in my tutorial that I may not need it). In this case I had this error message:
[Code]....
Ubuntu Installation :: With NVIDIA 310M Graphics Card Drivers (310M) On A Dell Vostro 3300 - Errors "no Device Found - No Screens Found"
Oct 28, 2010I have a Dell Vostro 3300, i5 460 processor with a NVIDIA 310M Graphics Card. I'm doing a KUBUNTU 10.10 (Maverick) install with the following results. The Live CD boots just fine to, "TEST," or "Install." Installation goes fine. However, the graphics card being used is the Intel i915. I have tried installing the NVIDIA drivers directly from the, "Additional Drivers," tool and after the reboot I get through the boot screen to the console. I try to manually startx and I get the errors, "no device found," "no screens found." The second install I tried purging and blacklisting the nouveau drivers and entering safe mode. Then using apt-get install nvidia-current. After that, nvidia-xconfig. Same results.
The third attempt I re-installed and this time downloaded the drivers from the Nvidia site (version 256.53). Blacklisted nouveau, remove all nvidia, updated initramfs, etc. The install went fine however I still end up at a console after boot with the same messages as above. No device found, no screens found. I've tried searching through the forum and web and have tried things like adding the modset option along with many other hacks, tips and fixes. still, no go.I can live with the Intel graphics for now although I lose 512MB of memory. Unfortunately there is no way to disable or change this set-up in the BIOS. I've seen quite a few bug reports at Launchpad:
1. Is this something I should just wait til a fix comes? Will a fix come?
2. Is there, or will there be an official Updated Ubuntu Guide for Maverick to install NVIDIA drivers with this tecnology?
3. Lastly, is there anything else I should try??
Ubuntu :: VFS: Cannot Open Root Device "mapper/mylaptop-root" Or Unknown-block(0,0)
Nov 5, 2010Installed Maverick last night... the system has been working fine all day... then on a reboot tonight got the following.
RAMDISK: gzip image found at block 0
usb 1-2: new high speed usb device using ehci_hcd and address 2
uncompression error
VFS: Cannot open root device "mapper/mylaptop-root" or unknown-block(0,0)
[code]....
Then it gives the Kernel Panic
Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Pid: 1, comm: swapper not tainted 2.6.35-22-generic #35-Ubuntu
Then a call trace...This is a brand new install of Maverick I copied my files onto a USB and did a fresh install on the whole drive using the alternate CD (the desktop and netbook editions both failed to read on my system) was previously using Karmic with no issues. I tried to e2fsck the dev/sda1 from the CD in "repair broken system" mode but the return was "clean" I read that as the file system being intact but this is an area that I have no real knowledge in.
Debian Multimedia :: Can't Configure X-Server - Errors "device Not Found" And "no Screens Found"
Apr 15, 2011I installed debian 4.0 (etch) on an old computer with some pickled graphics card in it, and then I upgraded the computer to one with slightly newer hardware only without the graphics card (the new one used on board graphics). I moved the hard drive from the old one to the new one but when I booted it up it failed to start the X-server and I got some errors listed for "device not found" and "no screens found".
I tried using "dpkg-reconfigure xserver-xorg" however I can't seem to find a working configuration. It seems pretty silly that when installing debian it can detect all this automatically with no problems but when it comes to changing some hardware around you are left in the dark with a complicated re-configuration process. Is there not some way to automate this? I'd rather not have to re-install everything
Fedora :: Cannot Open Root Device "<NULL>" Or Unkown-block(202,17)
Jun 21, 2009VFS: Cannot open root device "<NULL>" or unkown-block(202,17)
append a correct "root=" boot option
Kernel panic not syncing
VFS: unable to mount root FS on unkown-block(202,17)
I have a Dell xps with a dual core, 8 gigs ram, a primary hard drive with vista on it, and a secondary with linux in its future. It starts loading vmlinuz but ends up with the kernel panic before anything else. I am able to install earlier cores (5-8) and vista recognizes the ram just fine.
Fedora Installation :: Upgrade From 8 To 12 - No Upgrade Root Found
Jan 27, 2010I tried to upgrade from Fedora 8 to Fedora 12, but after preupgrade got everything ready I rebooted. Anaconda searched for storage devices and then said "No upgrade root found". What can i do to continue the upgrade manually?
View 1 Replies View RelatedUbuntu :: Can't Scan In 9.04 / No Device Is Found
Jan 26, 2010I just bought an hp 6500 wireless printer, and after taking 5 minutes to set it up (amazing how easy it is to get hardware working that supported by Linux) I was happily printing...But- I haven't managed to get it to scan from my desktop pc running 9.04. Tells me no device is found. I added the printer to a laptop running 9.10, and it scanned perfectly straight away...
I've been through the Ubuntu help documentation and haven't found a solution.I think that maybe Turbo Print (for our old Canon printer) might have messed something up. I had to uninstall Turbo Print to get the printer to work (it hijacked Ubuntu's built in printing stuff).
