Fedora Networking :: Internet Work With DHCP But Not When Static
May 28, 2009I can access internet when my eth0 is set toDHCP client. But when I set static I can ping goole.com... but my Firefox browser doesn't connect to Interent!
View 2 Replies
ADVERTISEMENT
Fedora Networking :: DHCP Works / Can't Get Static To Work
Mar 21, 2009Yes, another newbie question. Just loaded and updated FC 10. Everything works great with dhcp. Tried to setup static ip to learn more about how to set it up and nothing seems to work. I'm connected to DSL via a router when I ifconfig I get:(basic stuff)inet addr: 192.168.1.7 Bcast: 192.168.1.255 Mask: 255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
I have also tried default gateway 192.168.1.255 and 192.168.1.254.Most of what I have tried above has come from linux websites and faq's.Keeping in mind I am worst than any new newbie you have ever worked with
CentOS 5 Networking :: DHCP Work But Not Able To Setup Static IP?
May 26, 2010I am having several boxex with centos on it. No pb. I have recently setup a new box with centos 5.4 and I am not able to get the network working on it when configuring a static ip.I've configured eth0 and dns using "setup": unsuccessfulI've used the network config GUI: unsuccessfulAnd it is working very well when I let the dhcp getting the setting.I need a static IP.Here is the getinfo output when static ip setup, and below it, the getinfo for dhcp setting
== BEGIN uname -rmi ==
2.6.18-194.3.1.el5 i686 i386
== END uname -rmi ==
[code]....
Fedora Networking :: Internet Very Slow / DHCP Doesn't Work W/ Wireless Connection
Jul 17, 2009I am a convert from Ubuntu (9.04 kept freezing on my laptop; when it did work, many packages it seemed were outdated--ie only Eclipse 3.2, rdesktop was messed up [and apparently is also in Fedora]), and I am having some trouble with getting my wireless working.I am running Fedora 11.First off, there is a problem when trying to connect when using DHCP. NetworkManager gets to the second green dot, and then after a short while I am given a message that the connection was disconnected.
Configuring the interface manually, not using DHCP, allows the connection to complete. However, the internet is very slow. There is a 15-30 sec delay before website loading actually commences, and then another delay each time an ad must be fetched from another server.How can I fix this delay? I know I have encountered it in earlier versions of Ubuntu, but I can't remember how I fixed it.About the rdesktop problem, if anyone is able to help [maybe I should post another thread?], the cursor color (the color of the pointer) is inverted---where it should be white it is black, and where it should be black it is white. I use rdesktop a lot to connect to my terminal server in my basement. Any idea how to fix it?
General :: Fedora 7 Machine Browses Internet On DHCP / But Fails Completely On Static Address
Aug 3, 2010I am struggling with what might be a minor problem. I have a home computer which I would like to setup as a webserver and hence give it a static IP address. It is connected to by wire to a router that is connected to the WAN via PPPOE. If I enable the network card on DHCP it works fine in browsing the web. If I now set it to static IP address it does not brown. Essentially I use the command setup to run the static IP setup. I then set my IP address to 192.168.254.X , the subnet mask 255.255.255.0 and the default gateway to 192.168.254.1 (this is the router connected to the WAN). I am able to ping the router, however when I try and browse on static it does not work. Your help will be most appreciated as this has taken way too long to solve and I have Googled as much without success.
View 5 Replies View RelatedUbuntu Networking :: Wired Network - Can't Get The IP From Dhcp Server (TW-EA510) And Static Settings Doesn't Work
Feb 16, 2011I'm having mysterious wired network problem with my Karmic/9.10 machine. It hasn't been in network a while, but now I finally got the cabling done. I can't get the IP from dhcp server (TW-EA510), and static settings doesn't work either. Fresh cabling showed OK 1Gb connection on tester, and win7 laptop works fine. I even tried with long cable though the rooms, but it doesn't help, so it definately isn't the new cabling.
Log from the router after issuing #"dhclient":
Feb 16 23:01:43 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:43 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:01:49 DHCP SERVER: DHCP request from 00:1b:ea:c8:a0:ba
Feb 16 23:01:49 DHCP SERVER: DHCP ack to 00:1b:ea:c8:a0:ba
Feb 16 23:01:54 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:54 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:02:03 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
[Code]....
Motherboard is some old Lanparty with two ethernet ports, NVidia CK804 and Marvell 88E800 rev 13 Gigabit netwok adapters, neither of them works. At least another of them has been worked earlier when I last got it wired. It's been a while, so I'm not sure which one of them and with different router if that matters.
Fedora Networking :: Static DHCP Works On All Computers
Oct 18, 2009I'm pulling my hair out to figure out what's gone wrong. I have a small home network with a router and 4 computers, 3 linux boxes and 1 windoze machine.The windoze machine and 2 of the linux boxes (newer ones, one with FC11 and the other with Ubuntu Hardy) are using the router's "Set Static IP" option just fine. However an older FC5 machine I have always gets its IP assigned randomly. As this is the machine I ssh into from overseas via a Dynamic DNS, this is a huge frustration when the power goes off or I need to restart the machine. It's usually 192.168.0.2 but sometimes 192.168.0.3 and occasionally other numbers as well. It _should_ be 192.168.0.130. As near as I can tell, I'm doing everything the same between the machines. The router config is very simple and works for the other systems so I suspect I may have a legacy tweak that I did years ago that's causing the problem.
Anyone know what I can try? I'm afraid I'm not a networking guru (ahem, wouldn't be posting if I were!) so things like "check the this" will be more helpful if there's a clear example. "Check the this...emacs /etc/thisfile/config" and see if XYZ option is TRUE" is far more useful. Again, many thanks. If none of the systems were working right then it would be totally different...but 3 seem to work just fine and happily get their assigned static IPs. It's the one non-conformist that's the trouble...
Networking :: Enable DHCP Setting In Fedora 12 / Using Static Address?
Jan 2, 2011My DHCP setting is disabled in fedora 12 . Previously i was using static IP address. I Want DHCP setting enable, any idea.
View 1 Replies View RelatedFedora Networking :: Networking And Static IP Adresses In Presence Of DHCP
Aug 22, 2010I want to run networking on my laptops in different environment (home, office, airport etc). I found that Netowrk Manager assigns information from DHCP although I requested fixed IP and configured the gateway and DNS. If I reconfigure the DHCP server so that there is no free IP address, the laptop refuses to connect. When I remove the interfaces from the network manager, I get the fixed IP address, /etc/resolv.conf is not overwritten from DHCP but WiFi connection cannot be established, there is no dialog for setting WPA-PSK. The static IP address seems to be taken into account only if the DHCP server is not found. I need the static address at home and in my office because I need the possibility to ssh to my laptop from another computer but I need IP from DHCP possibly authenticating against RADIUS (Eduroam) when travelling somewhere else. Is there an easy way how to achieve it and how to switch profiles easily? And I cannot switch DHCP off because some devices in my LAN cannot work without it.
View 6 Replies View RelatedGeneral :: Configured Internet Via: Static IP , DHCP , PPPOE And Preferably To Have Support For USB Modems?
Feb 20, 2010I need a linux distro who provides the following:1) Has an partitioner who can resize fat , ntfs ,ext* , .....filesystems.2) Has an excellent hardware support3) The installer can install console or graphic mode 4) The updating can be done via console5) In console can be configured internet via: static IP , DHCP , PPPOE and preferably to have support for USB modems.
View 8 Replies View RelatedUbuntu Networking :: How To Set DHCP With Static DNS?
Aug 2, 2011Recently, I have encountered a problem when setting my network configuration.I want to automatically get an IP address through DHCP at system startup, and this can be done by editing /etc/network/interfaces file, adding
auto eth0
iface eth0 inet dhcp
The problem is that I want to set a static DNS, but DHCP will automatically overwritten /etc/resolv.conf file.
What should I do?
Networking :: DHCP And Static On 2 NICs
Jan 12, 2010I have a MB with 2 NICs and on 1 I would like to have a static IP, on the other a DHCP for a local network.The problem is the DHCP provided gateway is made default vs the one for the static IP and resolv.conf is overwritten.Any suggestions how could this be resolved? I can tweak both the DHCP server settings and the box settings.
View 14 Replies View RelatedFedora Networking :: No Internet Connection With Static IP Address?
Feb 17, 2009I am a windows user with no linux experience prior to Friday. Im setting up a music server (SqueezeCenter) running Fedora 10.
With the help of posts of this site Ive made good progress with complicated stuffnamely getting Samba and VNC working. My Fedora machine and my windows machines now see each others shared files, and I can control my Fedora machine from my windows machine. (The Fedora machine will ultimately be headless.)
But Im having trouble with a seemingly simple issue setting up my Fedora box with a static IP address. With DHCP enabled on my network Ethernet adapter, all works fine. I then used the System>Administration>Network menu to disable DHCP and to assign the same IP address that DHCP chose. When I do this, two cases need to be distinguished:
1. If I keep the box checked for Controlled by Network Manager, the Network Manager Applet reports a network connection, I nevertheless cannot access the internet, but my Fedora machine is able to communicate with my Squeezebox music player (connected to my network via my DSL modem Ethernet connections, and with a fixed IP address). 2. If I uncheck the box Controlled by Network Manger, then the Network Manager Applet reports no network connection and my Fedora machine is not able to communicate with my Squeezebox music player (and I of course have no internet connectivity).
Ive seen references on other posts suggesting that the Network Manager service be disabled. But I see no way to manually configure the network.
Ubuntu Networking :: 10.04 Set To Static But Resets To DHCP?
May 21, 2010basically I set the static ip address:
auto lo
iface lo inet loopback
auto seth0
iface seth0 inet static
[code]....
Restart networking:
"sudo /etc/init.d/networking restart"
Everything is fine but 24 hours later the server resets to the DHCP address assigned to it. I have not installed any GUI im just running Ubuntu 10.04 LTS in Hyper V. After it resets to DHCP I log into it using the dhcp address and reset the networking service "sudo /etc/init.d/networking restart". It goes back to the static IP specified in interfaces. I have rebooted several times but every 24 hours it resets.
BTW - Before someone asks about iface seth0 instead of it being iface eth0. It is a Hyper V module running.[URL]
Also FYI-
# ps -ef | grep dhclient
root 1234 1 0 May19 ? 00:00:00 dhclient3 -e IF_METRIC=100 -pf /var/run/dhclient.seth0.pid -lf /var/lib/dhcp3
[code]....
Ubuntu Networking :: Can't Use Static Ip On Dhcp Server
Aug 17, 2010I have 2 Ethernet connections, one (eth0) for the internet which gets set with dhcp, and one (eth1) for my internal network on which I have dhcp3-server running. I set eth1 to use static IP in interfaces, but every time I reset the network, it is fine for a couple of minutes, and switches over do being served by my own dhcp server on the same machine. (the interfaces file clearly says "iface eth1 inet static")
View 7 Replies View RelatedUbuntu Networking :: Static IP And DHCP Simultaneously?
Jan 5, 2011Where I work we use almost exclusively Ubuntu 8.04 in command-line only form. I need to know if it is possible to configure one of these devices to use DHCP and a given Static IP at the same time. I know how to do one, or the other, but not both. #1. Is this possible?
#2. If so, how?P.S. Yes, I did look around before I asked this, but I could not find anything. Maybe I suck at searching?
Ubuntu Networking :: Moving From Dhcp To Static Ip
Jul 19, 2011ps3 lan, psp wan, xp desktop lan, netbook W7 wan, fujitsu laptop ubuntu wan for surfing but often lan for large files, android 2.1 phone wan, mac sawtooth G3 (rarley) lan. near future, tablet wan, crappy ancient laptop xp lan rarely.next week i am having 6TB DS211j NAS (omg cant wait)I think, from what i have been reading, that moving to a static ip for each device will be better suited.I manage the belkin router from the ubuntu latop and wondered what the best way to proceed is, which first, what order etc etc.I can understand what needs to be done, i have the primary dns and ip numbers and mac address for every device ( the network is mac filtered)
so how would you begin...... a peice of paper and some drawings i have ready to plan it out.the reason i choose to change from dhcp to static is because of the arrival of the DS112j. from my understanding this device would benefit from never having its ip changed on the network. There have been times when the ip has changed on some of the devices in the past when the belkin has suffered a power failure or reset.
Networking :: Can't Change From Dhcp To Static Ip Address
Jan 16, 2010Can't change from dhcp to static ip address.I've installed Oracle's version of Linux Redhat 5, but I'm having no success changing from dhcp to a static IP address. My machine is plugged directly into a Belkin router which has the IP address: 192.168.2.1.If I use the gui: /usr/bin/system-config-network and set the network device to dhcp,it works fine. But if I set the IP address manually, I get no internet traffic, and if I ping an internet website, "network unreachable".The installation instructions for Oracle say that they want a full domainname. I've tried gateway.2wire.net. This worked in the last place I did a successful installation.It was the address of my ATT router. If I plunked that into a browser, I got the router configuration.
View 7 Replies View RelatedFedora Networking :: Static IP Cannot Contact The Internet Or Even Gateway Router?
Jul 29, 2011I have a fedora 14 box which has a static IP and I can not contact the internet or even my gateway router.I know it has to do with my kernal IP routing table but I can not find the command to do what I need...Here is my kernal IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
My gateway is 192.168.1.1 and my static IP is 192.168.0.2.
Ubuntu Networking :: Static IP Defaults To Last Dhcp Until Restart?
Oct 17, 2010I set up my interfaces file just fine on one of my computers and everything works. On my desktop its a no go. This is what I've done. I set my interfaces file to look like this
Code:
# The loopback network interface
auto lo
iface lo inet loopback
[code]....
Then I uninstalled network manager (sudo apt-get remove network-manager-gnome). Now I can restart my computer, but I do NOT get a static IP of 112, instead I get the last working dhcp given address (.104). It connects and I get internet using .104.
BUT, if I run
Code:
sudo /etc/init.d/networking restart
then it DOES work. It changes to my address .112 and the internet works. But when I get that I get an error SIOCDELRT: No such process found (or something similar to that). But after it sits, it still finished with [OK] and my internet works. Clearly something is amiss though. Because it doesn't go to the static IP imediately. I even tried setting up a rcS.d link to a file with that networking restart command, but still no go. It starts with the .101 IP.
Ubuntu Networking :: Change From DHCP To Static IP Address?
Nov 14, 2010Does anyone know an easy way to do this? I can't seem to figure it out.
View 6 Replies View RelatedNetworking :: DHCP Server - Losing Static IP Address
Nov 10, 2010I have an Ubuntu Server 10.04.1 that I have given a static IP address. Every six hours or so I will lose connectivity to it and when I type ifconfig to look at the network information, it has been given an address via dhcp. If I run the /etc/init.d/networking restart command the IP address goes back to my static address and things are fine for another 6 hours or so. Here is what is in my interfaces file:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.60.82.15
netmask 255.255.0.0
broadcast 10.60.255.255
gateway 10.60.254.254
This machine is also a DHCP server and I checked to make sure there are no other DHCP servers on my network. Right now my fix is to have a Cron job running that runs the reset command every 5 hours, but I would like to find a more permanent solution.
CentOS 5 Networking :: Converting From Static Ip Network To DHCP
Apr 19, 2010I decided to take the plunge and change the existing static ip configuration for my home network to a dynamic (DHCP) configuration. The DHCP server in this new network config is my gt701-wg actiontec DSL modem.
[Code]....
CentOS 5 Networking :: Spontaneous Static IP To DHCP Switch?
Jan 7, 2011I had something I think if very odd happen to one of my computers at work today, it appears to have spontaneously switched from having a static address set to getting its address by dhcp.this is a small office with a mix of mostly linux servers and desktops with a few stand alone windows computers, mostly notebooks. Most of the desktop computers get their address by dhcp, they all have NIS /NFS for remote mounted home directories (interchangeable desktops so anyone can log in at any desk). The particular desktop computer in question here has a shared printer on its parallel port, so has a static IP. Yesterday a UPS in the server rack died, after pulling it and plugging things back in and restarting the servers, it was easiest just to reboot all the desktops, everything came up ok including the desktop in question, and the printer did work.
Today I pulled the oversized UPS from this desktop to replace the dead one, and put a more appropriately sized one in its place, shut the servers down again, rebooted, etc,About an hour later someone tells me the printer is not working on the desktop, and after a lot of searching I find this desktop has the wrong IP address, I ran system-config-network and it showed the address was set to dhcp, I changed this back to the correct static IP and things seem to be working ok now.
Fedora Networking :: Cannot Get A Static IP Address To Work In 11?
Oct 29, 2009I cannot get a static IP to work on Fedora 11. Using Network Manager, I set the IP to 192.168.1.130, the subnet mask to 255.255.255.0 and the gateway to 192.168.1.0 but it doesn't work. I also tried 192.168.1.1 for the gateway, which is what I used in FC7 but still no luck. I verified that these are the settings that I used in FC7, I don't remember ever having a problem before with this.I do remember someone telling me not to use Network Manager in conjunction with Network Configuration... does that make sense? That was for FC9 on my laptop and it was for the wireless so perhaps that doesn't apply here. I did try unchecking the box for Network Manager and using strictly Network Configuration but it still didn't work.
View 10 Replies View RelatedUbuntu Networking :: Server: Dhcp - No Static - Cannot Ping Router ?
Dec 9, 2010Fresh install of 10.04.1 server; installs seamlessly; finds network no problem.
However, establishing static connection is driving me batty. Will not take. I've reconfigured "interfaces" file several times. My fingers are numb ifdown-ing and ifup-ing and /etc/init.d/network restart-ing.
I have two files in /etc/network ... interfaces and interfaces~ (one static and the other dhcp). I can switch them in and out of play. The dhcp works and pings out like a champ. static is dead, just dead. Cannot ping router ... nothing.
Ubuntu Networking :: Changed Server From DHCP To Static And Now Cannot Access Web?
Sep 1, 2011I assigned a static ip to my Ubuntu Server machine and it cannot access the web now. It can access anything on the LAN. The other two nodes on the network (one wifi one hardwired) can both access the web just fine.
View 1 Replies View RelatedNetworking :: Network Very Slow If Static Ip Settings / But Fine With DHCP
Jan 27, 2010I've been using slackware for many years. I think I started with Slack 8. I know how to configure the network, I've had this same POS Dell computer for a few years now but the other day I tried to go to a different distro (first mistake) everything worked fine but it was not for me. Once you go slack you never go back! Anyway I had slack on here prior to the change and it all worked fine. I'm running slack 13 and all of a sudden my network is slow as balls! I set it up as I always have so I did some research and tried a few things, nothing worked. So i enabled DHCP and its fine now.. I have a dell xps 420. onboard intel nic. worked fine when i first installed slack 13. Anyone have any clue what to do? I would like my static IP on this machine.
View 6 Replies View RelatedCentOS 5 Networking :: Network Install / Static Changes To Dhcp In Anaconda
May 10, 2010I'm trying to install CentOS 5.4 from my local repo, booting the server from centos54-netinstall iso (vmware). I write "linux URL..." during boot. I eventually get prompted for network config, where I choose manual configuration. Hitting OK ignores my config and defaults back to dhcp, which won't work since I don't have any dhcp server available.Whats wrong? Is there a bug in anaconda?
View 1 Replies View RelatedFedora Networking :: Get KVM Static IP Bridging To Work On F10 Install?
Jan 29, 2009I'm trying to get KVM static IP bridging to work on my Fedora 10 install. I've looked at the related posts on this subject and tried some of the suggestions without full success. I've used the virt-manager to create 2 Windows XP guests on the host (all on the same machine).I need to use static IP addressing on the 2 guests as well as the host.I need the guest VMs and host to be able to see each other as well as connect to the outside world. Using the script below I found in an earlier post, I get network connectivity with the 2 guest VMs but the host can't get out at all.
[Code]...