Bij opstart wordt mijn bedrade internet/netwerkverbinding niet automatisch gelegd. Ik moet handmatig het icoon en eth0 aanklikkek om de verbinding te starten. Wat moet ik in welke file aanpassen om dit te verhelpen?
View 2 Replies
kdm startet nicht automatisch nach update von 11.3 auf 11.4?
[Code]...
I can't start eth0 and have read thru many of the threads on this and can't figure it out. What does this message mean?
Code:
[jeff@chladni ~]$ ifup eth0
Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/13
[Code]....
I use Network Manager to create an Ad-Hoc setup, no security, dhcp, all the simple stuff. Theres just no button or anything to connect to it The internet guide i found said create the network and then use network manager to "connect to a hidden network". No success, not even the wifi attempting to connect when i manually type the SSID of my adhoc. Other than Ad-Hoc, wifi connections are super easy and fast, click any access point i find and type a password "tada!" Internet.this Ad-Hoc issue so i can finally kick the windows habit?Maybe this info will help:
atheros 9285 wifi adapter (ath9k driver)
Linux 2.6.35.9-64.fc14.i686
KDE 4.5.4
Network Manager 0.8.1-10
I used samba on FedoraCore2 before...and now i cannot config the same on FC10. I cannot start the service smb ( /etc/init.d/smb restart or service smb restart ) those commands dont work. How can i do to config samba service.
View 11 Replies View RelatedThe following page suggests that trickle should work with Firefox for controlling up/download bandwidth, but I can't get it to work. Attempting to launch it via the shell script or directly with the firefox executable
trickle -d 128 -u 56 firefox
trickle -d 128 -u 56 /usr/lib/firefox-3.5.6/firefox
fails; firefox just never comes up. Both wget and ktorrent work with limited bandwidth via a similar command, although ktorrent always crashes after a short while (only with trickle), so trickle itself would seem to be okay. I'm running Fedora 12, up to date via yum, with kernel.org kernel 2.6.32.2. I think I must be missing something obvious, but I thought I'd ask if anyone else has this working before beating on it for too much longer.
I've been able to get a laptop on Fedora 14 (2.6.35.6-48) working with a Netgear WNA1100 Once up and running, I execute "ifconfig wlan0 up" from root, and everything connects just fine and is stable as long as I stay logged in. But, I haven't found how to do this automatically on boot.
I've tried to use NetworkManager, but I cannot figure out how to get the GUI to show up - it says its running and enabled in the Services gui, but I haven't figured out how to actually use it! I checked to see if the nm-applet is running with ps, and for the user login, I see:
I'm not sure if the "sm-disable" flag is my problem, or how to change it. I'm not even sure if NetworkManager will allow me to set things up for bootup, but that is the path I ran down...
I assume this is a fundamentally easy process to set this up on bootup, but I'm not stumbling across the method. I recall doing this kind of thing years ago when I was an engineer, and before I got my lobotomy to become a manager...
I upgraded from F14 to F15 using the DVD. The network worked fine after the upgrade.This morning I updated to the latest RPMs and rebooted, and now the network donot work!ifconfig shows only the lo interface. NetworkManager does not start, /var/log/messages shows signal 11.I tried to boot with the original kernel, but the results are the same.
View 6 Replies View Relatedmy eth0 connection is not automatically connected when fedora starts. I checked " activate device when windows starts" in network configuration. still it is not auto connecting and after connection the network icon is not changing to connected status although it is connected.
View 4 Replies View RelatedI have D-Link GLB502-T ADSL router with MTNL TriBand connection.I am currently using Fedora 10. I have successfully setup the ADSL router in bridge mode, and can connect to net using network-manager.
Now I need to know how to start this connection using command-line. I intend to schedule auto restart of the connection for my night unlimited connection.
I just updated my Fedora 10 installation with the latest NetworkManager (NetworkManager-0.7.0.99-4.git20090324.fc10.i386) and now my NetworkManager fails to start. The output in the /var/log/messages is
[code]...
After an upgrade to 2.6.27.25-78.2.56.fc9.i686 in March, my Atheros wireless stopped working. (It had previously run without a hitch for 9 months). Anyway, I finally got around to working on it today and using the "WiFi misery" thread managed to consistently get it to start manually via these steps:ifconfig wlan0 up
iwconfig wlan0 essid netname key xxxxxxxxxxxxx
click on "activate" in network device control (gives error msg, but works)
During boot-up, I get "Invalid argument" errors for "SET MODE", "SET BIT RATE", and "SET ENCODE".Currently NetworkManager service is disabled, but when enabled doesn't seem to change any of the above.I'd like to get back to automatically coming up wireless, if possible.
I'm a newbie on Linux and trying to find my feet so please be kind.I have installed vmware on my XP laptop and have installed fedora core 9. Network setting on the VMware is set to bridged. My interface eth0 which is using the wireless does not start on boot. I have to run ifup ifcfg-eth0.The file ifcfg-eth0 had onboot=yes and NM=no, so i changed it so that the NM=yes.However this does not resolve the problem at all. I have put the file back to its original configuration and I have disabled network manager and have had no luck
View 2 Replies View RelatedWhere I can get my wireless network running by typing the following lines of code:
Code:
But I have to do this every time I boot the machine. Ideally, I want the machine to do this on it's own at startup.
Also, I'm totally new to linux and I don't really understand what the 1st line of code is doing? The 2nd is just to check that the 1st line worked, and the 3rd does the settings for the wireless network I'm connecting to.
If you want to get into why I have to do this every time, then look at my original thread. But I started this new thread just to find out how I can get these lines of code done automatically at startup.
This was working and stable on f-10 and f-11. Fresh f-12 install including openvpn, Copied /etc/openvpn/* to new system as root from working f-11 syatem. /etc/init.d/openvpn start (and stop) works as advertised HOWEVER when set to start at boot using chkconfig or Services Configuration program, openvpn does not start. I must manually start it every time. When started, it does work without error messages in the log.
I tried removing the NetworkManager-vpn module with no effect. Thought it could somehow be overriding the auto startup of openvpn at boot.
I just finished installing Fedora 12 on a rack mount server. I was modifying the /etc/sysconfig/network-scripts/ifcfg-eth0 file to use a static IP address, but now nothing works. The device does not boot on start up or anything.Currently, ifcfg-eth0 looks like:
Quote:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=none[code].....
The eth0 device does not start on boot; the server does not get the IP address, is not reachable over the network, and will not connect to the internet....
I've tried to access the console in vain. Every time I try to, I get this message
Quote:
Cannot start gnome-terminal -t R1 -e 'telnet 127.0.0.1 2000' > /dev/nul/2>&1 &:No such file or directory
Then i decided to use the xterm client instead. But still didn't work
Quote:
Cannot start xterm -T R1 -e 'telnet 127.0.0.1 2000' >/dev/null 2>&1 &: No such file or directory
The last option I had was using Kconsole (linux kde) but still it doesn't work. And i get the same error message
Quote:
Cannot start /usr/lib/kde4/bin/konsole --new-tab -p tabtitle=R1 -e telnet 127.0.0.1 2000 >/dev/null 2>&1 &: No such file or directory
How do I configure a network bridge to start on boot?
I have two network interfaces eth0 and eth1.
Here is my current network script configuration:
Code:
#/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
HWADDR=00:10:18:4e:5e:a7
[Code]....
The bridge will come up if I restart the network service after boot....but it won't automatically come up when the computer starts.
I It does not start when the system boots. The smbd daemon is present and there are no suspicious messages in the system log, dmesg or the samba logs. The nmb service *is* enabled at all of the relevant run levels and does start if I issue the command "service nmb start" as root after I log in. This particular box's networking is 802.11n via a usb port and is under the control of the network manager. I have another fedora 12 box with an internal intel 5100 802.11n card and it does not have this problem.
View 10 Replies View RelatedArpwatch is failing to start at boot time. I got this message:
arpwatch: bad interface eth0: eth0: no ipv4 address assigned
Once I login into my account, I can (as root) run the arpwatch demon, but it is suppose to run at boot time. After I installed aprwatch, it was working correctly. I do not have an idea of what happens or since when the problem start to happen. I just realize, after a while , that arpwatch was not running. I am running Fedora 12 - 2.6.32.9-67.fc12
I'm fighting to make wifi work on an HP dv6-3194.
The symptom is that I'm always asked to enter the WPA passwd.
1-This is a fresh FC15 install:
Linux localhost.localdomain 2.6.38.6-26.rc1.fc15.i686.PAE #1 SMP Mon May 9 20:36:50 UTC 2011 i686 i686 i386 GNU/Linux
2- Network interfaces are detected:
3- pci card is RT3090
4- lsusb returns:
5- lsmod returns:
6- iwlist wlan0 scanning detects wifi networks without problems.
7- relevant dmesg entries:
8- wpa_supplicant.log
I've tried many suggestions from this forum about RT3090 or RT2800, but none worked :-(none seemed to be close to my problem:
Most of them relates to interface not seen, wifi networks not detected, system freeze.
i installed freeradius 2.1.3 on fedora 10 and want to use it with ieee802.1x using peap. when i run command to start radius service in debug mode the following output come
[Code]....
I've been fighting to get my wireless working and I've finally made some progress. I can actually manage to connect to my wireless network and so far it has been quite stable (fingers crossed).
However there is one slight nag. My wlan0 interface driver refuses to start at startup. When I type iwconfig its just not there. To fix this I have to manually run "rmmod rtl8187" and then "modprobe rtl8187". Then it works fine.
I've been trying to make a script to automate this but without success. I've tried both editing my rc.local and kde startup .xinitrc
How I could get those two commands to run automatically at startup after the boot process? I'm running Arch Linux and KDE 4.3
I'm trying to find how to schedule a process to start at a specific time (not on start up). How would I schedule a process/application to start at a specific time (if it matters, it will be a background process). For instance, have process abc start every weekday at 5am. I've done this for windows many times though have only been using linux regularly for a few months and haven't figured out the best way of doing this.
So far the best solution I have is to create a program that will start on boot and have it check the time and sleep until the required time and then start the required process(es) at the required time(s). But this seems more of a hack since I'd expect there to be a proper way of doing this.
I want to monitor my work on the terminal.I know we can use script command.But every time when I start the terminal, I have to type script to start it.I want to automate it. So where should I include this command so that it will start as soon as I start the terminal ?
MY WORK TILL NOW: I have put this "script" command in the .profile.The when I start the terminal, it became an INFINITE LOOP.I am able to "echo".Thats coming only once.....but if I write a "script" command then it is becoming an INFINITE LOOP.
I just installed TuxGuitar - very cool - and to get the sound to work I had to install Timidity++ as well. Before I start TuxGuitar I have to execute:timidity -iA -Osin a terminal window first, which is kind of a pain to do every time I run TuxGuitar.How do I get this line to execute on startup such that timidity is running when I start up? I tried adding that line to rc.local
View 13 Replies View RelatedI have 3 Interfaces for a different LAN's and when I start one interface the another interfaces goes down.How can it's possible?I configure my ethernets as:
Code:
/sbin/ifconfig eth0 172.16.3.108 netmask 255.255.0.0 broadcast 172.0.255.255
/sbin/ifconfig eth1 172.16.3.109 netmask 255.255.0.0 broadcast 172.0.255.255
/sbin/ifconfig eth2 172.16.3.1110 netmask 255.255.0.0 broadcast 172.0.255.255
As I reported in this bug:[URL].. root is not able to start an openvpn-connection via the "nmcli"-command to control NetworkManager, whereas my user does not run in any problems with this command. My error output when starting as root is as follows:
Code:
# nmcli con up id "my-openvpn"
Active connection state: unknown
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/5
state: VPN connecting (need authentication) (2)
Error: Connection activation failed: no valid VPN secrets.
Does anybody know what to do about this strange behaviour? The vpn-secret seems to be stored in the gnome-keyring and in the /etc/NetworkManager/system-connections/my-openvpn simultaneously. But root cannot access any of these. Why this is important? I'm trying to set up a dispatcher-script to automatically start openvpn on eth-connection. but this does throw the exact error from above (no valid vpn secrets..).
[Code]...
when i start the computer i will have 3 seconds to choose windows xp or else it will go on linux but someone told me that by changing the grub.cfg when i start my computer i will have 3 seconds to start linux or else it will be xp is this true ? and if it is can someone explain me how to do it because i would like that
View 3 Replies View RelatedThe difference between: service httpd start & /etc/init.d/httpd start.
View 3 Replies View Related
