I have fedora10 with GNOME installed on my machine. Now I want to try KDE, but I don't know how to get KDE installed. I have the installation DVD here, but I don't know how to do. Could you tell me how to install KDE on my system? I'm a newbie in Linux.
View 11 RepliesI am having trouble getting adobe-flash to properly work on fedora. I have done it before but on a different distribution, and i am migrating to fedora. Here is the output and command that i used for installation of adobe-flash (below). I dont know what else could be causing the problem, note: i restarted firefox after installation accordingly. I tired upload the code and the forums system said
Code:
The text that you have entered is too long (23586 characters). Please shorten it to 10000 characters long.
so i put the information a a .txt file and it is at this download link from 2shared. u have to look for the small words Save file to your PC: click here the other stuff is just junk links to try to get u to get ad funds from clicks, took me a few clicks to find which one actaully downlaods the file. [URl]...
Does iptables get installed automatically during installation of F13 or is it a manual option to have it installed during installation?Why do I ask because I had a friend install F13 for me on my new machine in the states.After some hair pulling when I couldn't get connected via port 80 I learned that iptables was "blocking" the port.
View 8 Replies View RelatedI am trying to install 2 or 3 versions of linux on my hardisk of 500GB capacity. The configuration of my machine is Intel Dual Core, 4 GB Ram, 3.0 Processor Windows XP is not installed on this. I tried to use a tool called GParted but was unable to use as it was not able to bring up the XServer So I booted the machine with fedora14 installation CD and chose "Custom Layout" After reading about the partitions needed by Fedora I created 3 partitions in /dev/sda /dev/sda1 the boot of 500MB formated as ext4 /dev/sda2 the swap of 6096MB formatted as swap /dev/sda3 / size 150GB formatted as ext4
The installation went well and fc14 runs well on this. However when I went to install the other linux version ....the installer was not able to recognize the unallocated space of nearly 350 GB on the hard disk.....So I am not able to create new partitions and then install the new linux on the newer partition. As a result I am unable to make use of the remaining space on the HDisk. I think I should have created /dev/sda4 /dev/sda5 etc when I installed fc14 itself....
So i'm VERY new at this, i need fedora for this research i'm starting. I have a dell and vista was installed on it, then i installed fedora 10 like it said on the fedora site from a boot disc. Now i have fedora but i don't have vista nor access to the memory it took up. I tried to restore to start over but i can't, and i need vista back.
Normally i would restore from the 10 G partition dell sets up for recovery but i'm not able to get to it, and i don't have my vista discs they're back at school.
What do i do?
i have insatlled fedora 9 on a system with xp already installed on it but when i start fedora it hangs while booting. after starting the service ANACORN it hangs and same happens with fedora 10. it hangs while starting CUPS.
View 2 Replies View Relatedi'm having issues with looking for extra softwares to install... YUM can only see already installed softwares, i can't see any extra...
this happened after i modified the yum.repo.d files for installing softwares from DVD... i edited the files back to original.. i've triple checked my repo files and they are correct...
is there anywhere else YUM has files for handling updates and software installations? like yum.repo.d? some config file of some sort?
i can't run update either... well i all can run but reports no updates available
I tried upgrading to my linux to fedora 12 through updates and that completely screwed up my computer. Next I burned a disc with F12 and tried to a clean install but the installer stops after 823 packages. I tried an older FC9 image and that does not go through either. Now I'm stuck , I cannot get to my windows because I cannot get to GRUB . Is there a way to just install GRUB and boot into windows. I see that GRUB is around package # 600 or so in the installation and it does get upto that point.I just need it to finish instead of barfing on packages (no skip option in linux installer how clever!)
View 1 Replies View RelatedI am attempting to do an installation from a Fedora 12, 5 CD set.I only see the text mode installation! I think because Intel 810 graphics hardware is not being detected?At the end of the installation the boot is in runmode 3 and only a root account has been created. Not much else has been configured! No network no Xorg etc. I do have vi but that's about it as far as configuration tools go.
I have previously installed Fedora 6 without any difficulty. I tried installing 6 first but 12 didn't give me any 'upgrade' options, just overwrote with a bare installation.
I have a CD with the Fedora 14 ISO burned. It doesn't appear to have perl installed on it. (Open a terminal, type "perl" and press Enter, and get the "Command not found." response.)Further, once I install to the hard drive and boot from it, run the updates and let them complete, and reboot, I still don't seem to have perl and I can't find a package for fc14 that would install perl.I must be the only one having this problem because I don't see any references to this and somebody would have noticed by now, but is there anyone who can tell me what I might have done wrong?
View 6 Replies View Relatedi have installed "php" by su - "yum install php"..When i try to test my installation,by creating a php script using the line <?php phpinfo(); ?> and asving it in the .php way.But when i try to open it via my Firefox browser .. it is not showing as intended.!! what went wrong i don't know!Please guide me!Hi i have installed LAMP on my Pc by following the instruction in this link "http://www.unixmen.com/linux-distributions/7-fedora/1284-how-to-install-lamp-in-fedora14-". But after installing php ad when i try to test, it just showing phpinfo();, what will be the problem ?
View 6 Replies View RelatedI've just downloaded F11 i386 installation DVD. I installed it on my laptop and just now noticed that PAE kernel got installed. Isn't PAE for systems with RAM >3.2 GB? It's a pretty old laptop (P3, 256MB ram). So, is PAE kernel ok for me or should I reinstall from scratch and use some specific switches in the installer to get non-PAE kernel? I've also read that Yum doesn't recognize PAE packages dependencies and will install non-PAE kernel modules if I try to install let's say Nvidia driver or so.
View 11 Replies View RelatedI am installing to an empty hard drive (that for some reason is shown as /dev/sde - I don't know if it is related, but seems weird - why is it not sda, and moreover, not hda - it is an ide drive), and install goes through fine, but in the end it says "no kernel packages were installed, your grub configuration will not be changed", and the only option is to reboot. After rebooting, I get thrown into grub command prompt, and have no idea what to do there.
View 2 Replies View RelatedNo problems during installation (except DVD didn't automatically eject at end).
On booting, I got a bar across the foot of the screen (shades of blue, which then changed to white with Fedora 11 on RHS); then waited ... no change, no keyboard or mouse response.
Repeated the whole installation again - same result.
Then installed Fedora 9 and it booted OK; using Admin/Display showed a default CRT and XGI Volari Z7 video card.
I installed LinuxMint to an external hard drive and had vista on my interal drive. After doing this, the only way my computer would boot up was if I had the external drive plugged inThen I accidentaly dropped my external drive and broke it. I decided to just install Fedora 11 onto my internal drive primarily because I figured it would would still be able to choose windows from the grub screen, but now there is no option for windows in grub. My other problem is that Fedora wont recognize any liveCDs that have tried to run from other distros (eg. LinuxMint7, Open SUSE)
View 3 Replies View RelatedPrefactory note - I've also posted this question on the Ubuntu forum, but so far no solutions have been provided.
My system has several hard drives. The important ones are these:
Sata 1 - Fedora 12
Sata 3 - Windows 7
Slave 1 - Storage
Sata 1 was NOT installed with grub. When I switch OSs, I do it by rebooting and choosing the other drive as primary.
I downloaded an ISO of Ubuntu 9.10 (64 bit) and burned the DVD of it. I backed up Slave 1 and then booted off the Ubuntu DVD. I clicked on "Install Ubuntu", selected Slave 1, and installed onto it.
Subsequently I rebooted the machine, going into the BIOS to boot off Sata 1, so I could get my Fedora Firefox settings to replicate them under Ubuntu.
Instead of Fedora 12 booting, Grub 1.97 came up. It had 5 choices, Ubuntu, Ubuntu Repair, Memtest, some other Memtest, and Windows 7.
Subsequently I tried cracking the box and physically disconnecting Slave 1. When I rebooted Sata 1, it crashed to a grub command line. Apparently when Ubuntu installed, it infected Sata 1 with grub, even though it installed the rest of Ubuntu on Slave 1.
I really, really, REALLY need to get access to the Fedora 12 drive. It's got my work on it.
how I can get grub out of Sata 1 and regain access, or maybe reconfigure it so it recognizes the existence of Sata 1? Personally, I don't want it there; that's why I never installed it in the first place.
when i would install other distros it would only take up maybe 10 gigs or 5 gigs or 2 gigs of hard disk space when i installed fedora the other day i went to the home folder and it said only 90 gigs available and the file system folder says only 46 gig available are there any packages or software i can remove to free up or remove to free up hard disk space? as i have this on a netbook not that im gonna be downloading huge files ,or doing some heavy work on here i just want it to be lightweight and optimized for performance would rather remove what i did not need or use.
View 2 Replies View RelatedI'm trying to get a Belkin f5d8010 working. I installed ndiswrapper from Add/Remove software, but when it was done, I couldn't find it. Checking the forum, I ran across something saying that I had to compile from source. This is in Fedora 13. Can I get it working with "point-and-click," or do I have do something that requires some thought?( I don't have many of those.)
View 14 Replies View RelatedI'm taking a class this semester on Linux and a Fedora 13 DVD came with the book. Just now I've installed Fedora at home and started the updates. I saw a PAE entry in the updates so I went to the Terminal and typed uname -r and I see that the Fedora 13 DVD installed a PAE kernel on my machine that has only 1 GB of RAM.
Why did it do that?
Can I swap out the PAE kernel for a non-PAE kernel? (edit- I'm a Linux noob so I don't know)
Does it really matter?
After the updates I was going to try to install the proprietary Nvidia driver.
Am new to linux and am trying to install NS2 on Fedora 14 running on VMware, the am following the instructions at: [url], however, on step 5: tclcl installation am receiving the follow error and have tried to look at other posts but no luck.
View 7 Replies View RelatedI have installed fedora core 9 with a successful installment but the GRUB is not loading Vista BOOT MGR is Missing root chain loader +1. Booting Other does not load.
View 14 Replies View RelatedThis is my first post, as I've finally become fed up with trying to get the nvidia drivers installed on Fedora 10. I've read through all the posts here about how people have had problems. I know about the rpmfusion repository, and have followed leigh123's instructions to the letter at this link:[URL]The exact stepsI have taken before following his sage advice follows this way: install off the CD image I burned of Fedora 10, run from the menus "System-->Administration-->Update System" to get the system up to date, reboot to make sure everything is working fine.
Then I follow the above instructions (only because they have gotten me the closest to getting the drivers working). After the reboot from following those instructions, the system starts up, and I have a desktop. But when I restart again, either because I'm shutting down for the night, or just to check again that everything is fine,I get nothing but a flashing cursor in the upper left of my screen. I'm able to CTRL+ALT+F2 and get to a login that way, but can't get into the GUI. I've searched the forums (both here and on The Web generally), and can't find a fix for this that works for me. I have gone back and erased the partition and reinstalled, so I'm at the basic install with all the updates for my system, and needing help with getting the drivers installed and working.
Just to give a run down of what I have on my system:Two NVidia 8500 GT cards connected with the SLI bridgeAMD Athlon 64 X2 Dual Core 3800+Runningl 2.6.27.12-170.2.5.fc10.x86_64 (I'm typing this up as I reinstall updates as I listed above).Before anyone starts giving suggestions, please make sure to give the full instructions, as I'm new to Fedora/Linux. And if there is anything else you wish to know about my configuration
I just installed a package using the System -> Administration -> Add/Remove s/w tool.
How can I find information about what files it has installed and where? I was expecting to get some header files from this package but cannot find them in the normal places like /usr/include etc.
I just got an update that installed, and after a reboot I've got one core at 100%. The "you need to restart" icon in the notification tray said "glibc glibc glibc glibc nscd". Now that I look at it, It's switching between both cored. This behavior is consistent over multiple full reboots as well as kexec reboots.
Edit: Strange, just when I finished, the CPU load settled out and now everything is fine. I wonder what was going on. I'm rebooting right now to double check. Edit2: Yep, same issue 100% usage on one core. And it probably will level out soon. I'm not sure what could be causing this. I assume that glibc could be the issue.
I am trying to install Fedora12 on a usb hard-drive, the first problem I encountered was that the hard-drive would not boot stating "kernel panic: unable to create root device", this is just using the standard fedora 12 install and mostly clicking next (although I add my vista to the grub and tell grub to install to /dev/sdc which is the location of my usb hdd).
I have also tried livecdtousb (wont boot in stick and wont recognize removable hd as removable)
I have tried setting up disc encryption and installing with no LVM.
The drive has this same problem with ubuntu 9.10 however ubuntu 8.10 installs perfectly and I am guessing earlier versions of fedora will too. The problem is that I would like the kernel features of Fedora 12 (mainly modesetting) without this issue.
I have played about with grub and quite like disabling LVM and using the uuid of the drive to select the root partition, my boot partition has 500mb, I have a 2gb swap space 50gb ext4 root partition & 27gb fat32 partition code...
I've installed Fedora 12 64bit, but the computer crashes while booting, basically after the irqbalance or rpcbind steps.
Here are photos of the error messages:
Here are my hardware specs:
MB: Biostar TF560 A2+
CPU: AMD Athlon 64 X2 Dual Core 5000+
RAM: DDR2 800 Dual 128 bit, 2T (4GB)
GPU: ATI Radeon HD 3870
The sound and network cards are integrated but I've tried disabling them from BIOS and the problem persists.
Note that I've tried Ubuntu (32bit and 64bit) and it also crashes about 30 seconds after loading the graphical interface (either installer or login screen). Fedora's graphical installer worked flawlessly, tho. I've also tried SLAX (using it right now) and it works without any problems.
i want to install Fedora 13 on a x86 PCi want to boot from a usb disk, and install from a LAN http serverbut i got a faild as "Unable to retrieve the install image"i have tried to check apache log,access log:
Code:
10.0.0.105 - - [15/Jun/2010:18:44:20 +0800] "GET /fedora//images/updates.img HTTP/1.1" 404 298 "-" "anaconda/13.42"
[code]...
how to check where an application gets installed on my system!!!
View 14 Replies View RelatedI installed Fedora 14 in my HP laptop (dual boot, with Win7). After reboot, I don't get wireless connection (wired connection is fine). The wireless connection in Win7 is fine. I am just not able to get it in F14.
View 2 Replies View RelatedI installed F14, then dropped in my passwd, group, and shadow from F9 w/o backing up
what F14 had done. So now I get some messages about missing users like rtkit
and missing groups.
Is there an easy way to find out what default users and groups F14 would have installed?