Fedora :: How To Get 'lame' In Path
Jun 14, 2010
How do I get 'lame' in my path? I just installed Asunder, and I want to rip CDs in MP3 format to my hard drive. I get an error message that reads:Quote:'lame' was not found in your path. Asunder requires it to play MP3 files. All MP3 functionality is disabled.
View 4 Replies
ADVERTISEMENT
Mar 20, 2010
Ok, so I find myself ripping audio CDs frequently, which I then lame to mp3's to put on my media player. I usually define the --ta and --tl (artist and album) ID3 tags and batch encode each album, but don't bother with the track tags as I'd have to do each one seperately.
So, I'm working on a script to do all this for me, extracting info from 'pwd' etc. to fill in the blanks for --ta, --tl and --tt (track name). All is working well, except that I can't get sed to pass on the "" character to lame to escape spaces.
Here's what I've got so far: (trouble spot is bolded - no need to pay attention to the rest of it)
Code:
All this does is pass a 'space' on to lame, which it takes as an invalid argument.
View 10 Replies
View Related
May 6, 2011
i'm trying to rebuild mplayer and facing the same error - lame-devel package can't be found as when i try to use rpmbuild. I'm not sure why and how to fix it. Here are steps and information:
[Code]...
View 7 Replies
View Related
Jan 16, 2010
I am looking for xmms-mp3 and lame rpms for FC12. where can i get those packages ?
View 2 Replies
View Related
Oct 21, 2010
how to add a path to PATH variable permanently so that it remains persisent even after closing shell and rebooting the system when i added a path, to variable it remained there as long as i didn't closed the shell. but when i reopened it ,changed were undone.
View 2 Replies
View Related
Jan 16, 2011
I found the following function in /etc/profile file.
[Code]...
1. I dont undestand what "if ! echo $PATH | /bin/grep -qE "(^|:)$1($|:)"" this if statement actually comapres??
2. Also what is the difference between PATH=$PATH:$1 & PATH=$1:$PATH
View 14 Replies
View Related
Jun 14, 2011
When I add some path in .bashrc by commenting out old path and adding new one like this:
#EXPORT HOME_PLAY=/home/gem/old_play
EXPORT HOME_PLAY=/home/gem/play
EXPORT PATH=$PATH:HOME_PLAY
After saving above changes, I enter the command: source ~/.bashrc Now if I do echo $PATH, the path shows both the old PLAY_HOME and new PLAY_HOME. This is really bad and messes up a lot of things in my project. This problem only goes away if I logout or reboot, a rather very long process. What is happening is that the old path is added to new path element and the old path includes the old path element you want to remove.
View 10 Replies
View Related
Mar 23, 2010
running Windows 7 64bit with VMware Workstation 7.01-build 227600. I have some knowledge of Linux, I have installed f12 and have updated the system as of 03/22/2010. All updates completed successfully.
1) How do I install VMTools on the f12 (after mounting the CD/DVD tool package)
2) How do I update the gcc files it says are dependencies?
Here's what I get on installation:Before you can compile modules, you need to have the following installed...
make
gcc
kernel headers of the running kernel
and then I am prompted for this input from the install script:
Searching for GCC...
The path "" is not valid path to the gcc binary.
Would you like to change it? [yes]
and this is where I get stuck. How do I get around this or satisfy the requirements for the install?
View 5 Replies
View Related
Apr 2, 2011
My new Wheezy install is looking pretty good and I'd like to copy some of my CDs to my harddrive. I'd like them in mp3 format, but unlike other distros, i don't seem to be able to find Lame, which is needed. I've searched for answers, but not come up with anything that works, yet. I know this question is probably asked a lot, but can anyone help me with this one? I have contrib and non-free enabled in my /etc/apt/sources.list.
View 4 Replies
View Related
Jun 7, 2010
i've downloaded LAME, but I don't know exactly how to use it in order to begin ripping CDS to the mp3 format.
View 9 Replies
View Related
Aug 16, 2010
I need to download lame package to my offline ubuntu [URL] but its involved so many dependencies to download. Is there anyway to ease the pain of downloading each dependencies separately?
View 1 Replies
View Related
May 31, 2011
Is there a difference in quality between converting an audio file (e.g. *.wav) to MP3 using LAME or FFMPEG? Or do they produce the same results?
View 8 Replies
View Related
Jun 17, 2011
I am wanting to reduce around 9.9gigs of music to 8gigs to fit on my phone. I have done some snooping and noticed a program called Lame. I also noticed a code:
for x in [ `ls -1 *.mp3` ]; do lame --preset 32 $x new32-${x}; done
I was wondering if someone would be able to explain the code and how I go about converting the bitrate to 96?
View 1 Replies
View Related
Jun 19, 2010
how to use lame to convert wav files to mp3. When using K3B sometime later, I noticed that mp3 was now listed as an option for the formats I could rip CD tracks in. I'm pretty sure it was never in the list before, and it says not just "mp3" but "mp3 (lame)" so it is obvious that my installing lame made mp3 an option in this list.The thing is, it doesn't work. I've tried burning in mp3 now, and every time, some error prevents it. The debugging output says:
Quote:
System
-----------------------
K3b Version: 1.0.5
KDE Version: 3.5.10
[code]...
and the error message, showing the command that failed, is shown in this screenshot I attached. (It wouldn't let me copy the text to the clipboard.)Any idea why it doesn't work? If I could rip tracks as MP3 in K3B, I could rip them all at once, and it would be much faster than using the lame command on each file in a terminal window.
View 1 Replies
View Related
Jun 11, 2011
First I've compiled and installed lame and xvid with --prefix=/usr.
Then I've compiled and install mplayer with --prefix=/usr.
Checking for libmp3lame ... yes (in FFmpeg: yes)
Checking for Xvid ... yes
mencoder -ovc help shows xvid (it works) but no mp3lame at all. And mplayer uses ffmpeg [ffmp3float], which extremely distors tracks. I'm sure it's not alsa, because music played online sounds normal.
View 6 Replies
View Related
Feb 17, 2011
i wanted to install ffmpeg with lame mp3 support.its procedure is as follows:
cd /usr/local/src/ffmpeg/
./configure -enable-libmp3lame -enable-libogg -enable-libvorbis
make && make install
but i have not passed -enable-libmp3lame during installing to ./configure so mp3lame support is not available.how can i modify existing installation to install libmp3
View 1 Replies
View Related
Aug 8, 2010
When using libmp3lame with ffmpeg is there a way to use lame options?
Code:
ffmpeg -i foo -acodec libmp3lame foo.mp3
For example:- --vbr-new, --abr <bitrate>, -V (n) and -q <arg>
I think it is possible to pipe ffmpeg to lame then use the options.But is it possible to do it without a pipe.
Code:
ffmpeg -i foo -f wav - | lame --vbr-new -V 4 - foo.mp3
View 7 Replies
View Related
Oct 8, 2010
I use this command:
Code:
find ./ -atime +360
to figure out the files that haven't been accessed since 360 days. The command above will return results like this:
Code:
/uploads/2010/02/some-file-name.ext
/uploads/2009/08/another-file-name.ext
... etc
I'm taking here about tins of directories, thousands of files. I'm looking to find a command that makes me able to move the results above to another path, and to create that path once it doesn't exist like below:
Code:
mv /uploads/2010/02/some-file-name.ext /old-files/uploads/2010/02/some-file-name.ext
But I want the executed command to create this path
Code:
/old-files/uploads/2010/02/
If it doesn't exist.
View 6 Replies
View Related
Jul 17, 2009
Java applet not loading image with relative path(e.g. images/1.jpg) but loads image with absolute path(i.e. from /root/user/images/1.jpg) . This is a problem when i want to host the applet on web server
View 2 Replies
View Related
Feb 21, 2011
I have a program that takes a relative path as input appends it to a some path string to get the actual path.
Now all I can input is the relative path. So if I want to go one level above my input will be ../mypath.
If I know the depth of the path used internally, I can use .. as many times to go to the root directory and then give the absolute path. But suppose I do not know the depth of the directory, can I construct a relative path string such that it considers it as a relative path. One way could be to have enough .. in the path string so that I can force an absolute path for some maximum depth of path.
Is there some path string syntax that I am not aware of but can achieve this?
View 2 Replies
View Related
Apr 26, 2011
Experimenting with shell variables, accidentally deleted the path variable how could I return to the original path value. What kinds of problems will I have if I don't have a path variable.
View 3 Replies
View Related
Oct 17, 2010
I am a happy Ubuntu user, I run it on all of my servers.
A few days ago I setup a new slice, and now I want to use it to convert ULAW (μ-law) WAV files into MP3's.
If I would only install LAME this would give me an 'Unsupported data format: 0x0007'. Because LAME doesn't support ulaw encoded wav's only Linear PCM's.
I have read that one can use the Libsndfile and use it with LAME --fileio=libsndfile (or something like that) when 'MAKE'-ing Lame. In this case because of the additional encoding library sndfile Lame can read and encode the ulaw into mp3.
I have also read another solution is to first convert the ulaw-wav into a pcm-wav with sox, and afterwards convert the output into an mp3 with lame. This seems to be a lot of extra system resources.
I am looking for a hands on tutorial howto wget, compile, install and run LAME with Libsndfile on Ubuntu Lucid (commandline only) so I can encode incoming ulaw files into mp3's?
View 4 Replies
View Related
Oct 15, 2010
Where can I download a copy of gstreamer0.10-lame plug-in? I looked in Synaptic Package Manager but did not see it listed.
View 2 Replies
View Related
Jun 5, 2011
I need to install these packages LAME MP3 Encoder, Libogg + Libvorbis, Mencoder and also Mplayer, FFMpeg-PHP, GD Library 2, CGI-BIN on a centos . I searched the Google but most of the wget commands are not working because the links are not active links and I get error message failed: Connection timed out. Does anyone know where to get these packages with explanation of how to install them?
View 11 Replies
View Related
Sep 14, 2009
I have a path c:windowsackup I need this string to be changed into /windows/back/up I used the command -bash-3.00$ echo windackup | sed 's/\//g' but the output is windbackup
View 7 Replies
View Related
May 31, 2011
Current script:-
prefix=user@my-server:
find . -depth -type d -name .git -printf '%h�' | while read -d "" path ; do (
cd "$path" || exit $?
[code]....
How shall i go about changing the absolute path to relative path, so that /home/git/mirror/android/adb/ndk.git gets converted to /mirror/android/adb/ndk.git //echo <command> "$prefix$PWD.git" ?? - anything for relative path?
View 7 Replies
View Related
Jan 16, 2011
prompt$sox mix2.wav soundstrack.mp3 sox FAIL formats: can't open output file `soundstrack.mp3': SoX was compiled without MP3 encoding support so i have seen a lot of other posts about this issue but none had an answer for me. i've run sox on numerous other mac and linux machines and never had a problem with .mp3 stuff provided i have lame and libmad installed. but on my current machine (ubunut 10.10) i can't seem to get sox to do anything with .mp3 despite having lame installed, reinstalling sox, etc.
View 3 Replies
View Related
Aug 1, 2010
I tried to install lame on Linux, but I failed running ./configure.
View 9 Replies
View Related
Jul 22, 2009
I bought un-managed VPS server for host a video sharing script. Server details
[Code]...
And that video sharing script needs "FFmpeg,Flvtool2,Libogg + Libvorbis,LAME MP3 Encoder" I searched google,forums,Articles. But i couldn't be able to find a way to install them on Centos
View 1 Replies
View Related
Apr 19, 2009
I am trying to figure out how i can add the path /usr/sbin/ into the $PATH variable. I want this to be used from the normal account. I am bored settinh this manualy each time my computer starts.
View 2 Replies
View Related