Fedora Hardware :: Access Printer Attached To Windows 7 Server
Aug 12, 2010
Want to access a printer attached to a windows 7 server. What I did was the following: 1. Installed samba-common, samba-client & samba-winbind. 2. Included Samba & Samba Client as Trusted Services in the Firewall with system-config-firewall. 3. SELinux is Disabled (in System Default Enforcing Mode). 4. Shared the printer in the Windows 7 server. Other Windows hosts in the LAN can print successfully.
In system-config-printer, I selected Add Printer -> Windows Printer via SAMBA -> Browse... The SMB Browser successfully found the Share and the Host, but won't show the printer. Am I missing something here? The samba wiki mentions that I also need to change some windows registries in this page: [URL].... Do I really need to do this? I don't want to needlessly mess with windows registry
View 1 Replies
ADVERTISEMENT
Oct 14, 2010
I have a laptop running Ubuntu 10.04 and my basement computer running Windows 7. I want to be able to access files on on both computers from either. I also want to be able to print from my laptop to the printer attached to the basement computer. I finally got printing working. Then I tackled the filesharing. I finally get filesharing working and now, I can't get printing working again, even though I've gone back to the version of smb.conf that I had when I was able to print. So here is what I've got.
<->testparm
Testparm results.txt
<-> Printer State
When I look at my printer properties in Ubuntu I see the status: Idle - Unable to connect to CIFS host after (tried 3 times) Cups Error Log When I look at the Printer Error Log, I see: (partial) Printer log extract.txt I can ping the IP address of the windows box 192.168.0.5, but when I try to ping the name owner-pc it fails. This would lead me to beleive that the there is a name resolution problem.
View 1 Replies
View Related
Oct 27, 2010
I am having some trouble getting one PC (Windows XP) to see the printer attached to the other PC (Ubuntu). I went to System > Administration > Printing in Ubuntu and did the following: Checked the box next to "Publish shared printers connected to this system" Checked "Enabled", "Accepting jobs", and "Shared" in the properties of the printer. I have an HP Deskjet 5650. Is there anything else I need to be doing?
View 9 Replies
View Related
Sep 18, 2009
I have a Centos 5.3 server with Samba file shares and a shared Samba printer. I am not running a domain.
I recently changed my windows desktop pc from an XP machine to a vista 64 machine... It has a different user name. Everything went pretty smoothly - and the and the vista machine found the smba printer - and even downloaded the driver from the samba server. he printer works OK - and the file shares are fine.
The only thing which is quite odd - is that the Printer Properties dialogue takes more than 30 seconds to come up - and every action you attempt with the dialogue takes a similar amount of time.
I will include below the essence of my smb.conf:
View 3 Replies
View Related
Sep 2, 2010
I have a Windows 2003 server with fiber attached volumes (NTFS) that I would like to mount readonly on a linux system to back it up to tape. The fiber device will allow me to present the volume R/W to one host and R/O to another, however, the R/O system doesn't see any of the changes made by the R/W server. In other words, how can I make a readonly volume refresh, scan for changes, or update without un/re-mounting it?
Is the "mount -o --bind" option what I want? From the MAN is doesn't seem right... the option "sync" seems slightly more promising but I think I'm just grasping at straws here. The best I have come up with is a cron job to unmount then mount the volume periodically.
View 1 Replies
View Related
Sep 18, 2010
we are having new printers. At the moment we over 1000 machines on multiple sites but no print server they are manually added on the machine ( I know don't ask).
Anyway there is no way they would let use a windows server so the only option I have is to use linux however I little unsure if it is capable of doing the job I need it to do. Basically I want to add the printers on the linux server either using samba or ipp (I would assume samba would be best).
The reason i want to do this is when we have to do around the machines I just want to go around the machines and just the map the printer and it brings down the driver and config etc as we want them to duplex. The issue is I been trying to gain information on the internet and getting conflicting information apparently I can add the windows driver onto the server so when I map the printer it brings it down. However some guides state you still have through the whole process of adding the printer and then choosing the driver etc. Which kinda of makes it pointless to do the printer server since I would already have to do this anyway if we don't have one.
I just want to go be able to go around the machines and for example click star run and do something like \192.168.1.1printer01 and then it done kind of thing.
View 2 Replies
View Related
May 18, 2010
I have 2 desktop PC's both running 10.4, both connect to internet thro a wireless router. One PC has a printer attached and I would like to be able to print from the PC without the printer attached, what is the easiest way to achieve this?
View 1 Replies
View Related
Mar 31, 2010
i am using ubuntu 9.10.i want to access printer which is installed in windows xp.
View 5 Replies
View Related
Oct 12, 2010
Having had an old machine running SMEServer for some time, I've decided it doesn't suit my needs and I've gone the Ubuntu Server 10.04 root. I'm having trouble connecting to a HP LaserJet 5P attached to the parallel port of the server. I had no trouble connecting to it when the server was running SMEServer, however, as this distro is aimed at Windows clients, the printer was configured as a Samba share.
In the new 10.04 configuration, I do not have Samba installed as I have no need for it. I'm exclusively Linux based (Ubuntu 10.04 desktop). Surely I do not have to install Samba in order to print?
View 1 Replies
View Related
Dec 14, 2010
I have an Epson RX610 printer attached to the USB port on my Thomson TG782T router.Works fine for our 4 PCs and laptops whilst running Windows XP.I don't seem to be able to add the printer under Ubuntu.I've tried all the addresses mentioned in the Active Network Connections.Ubuntu goes off an searches but doesn't find the printer (yes, it is switched on!)What address should I give it as a network printer?
View 2 Replies
View Related
Dec 19, 2009
I've got my other networking problem (mostly) solved, but now I'm having other issues.I was previously able to access the shared folders on a Windows machine on the network essentially by default. Now whenever I try to navigate to the shared folders graphically (either through Places->Network->Windows Network->(workgroup name here), or through a custom shortcut on the deskop), I get a message: "Failed to retrieve share list from server". I have no idea what I might have done config-wise (or install-program-wise) to screw it over, but something's definitely not working...it's been like this for a good many weeks, and I've just dealt with it, seeing as how I don't normally use that shared folder much anyway.
What's really ticking me off now, though, is that long before this started happening, I had set up a printer share with the same computer (using the graphical tool that comes with Ubuntu), and that worked excellently to start out. Recently, however, when I tried to print from the same printer (after the "Failed to retrieve share list" message started showing up), it would sit there and show "Pending"; it wouldn't print at all. Then I tried deleting the existing entry and creating a new one, figuring a new, fresh configuration would be created. However, when I tried to add a printer via the graphical tool (same as I had done before), it's telling me that "No printer was fount at [that] address".
View 4 Replies
View Related
Jan 30, 2011
I have a Brother mfc-8890dw that is attached to my local area network.I can ping the static ip address of the printer and receive a reply. I can print from all applications.I cannot scan. I did modify the rules files but that only appears pertinent for usb attached devices. What do I need to do to get XSane to recognize my Ethernet attached scanner/printer?
View 2 Replies
View Related
Jul 21, 2010
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies
View Related
May 9, 2011
I am new to linux and know some basics, no proper knowledge of servers. I want to know is that how can i access my companies "fileserver" from linux (gui as well as from cmd line). This file server i can access easily from windows machine but i don't know how to open/access file server from linux machine..If can tell what tools are needed and also but is the process from command line.File server is windows server and my machines is Redhat linux.
View 3 Replies
View Related
Nov 25, 2008
I have a OpenSUSE 11 machine set up as a domain controller. I have set my printer up to be shared to Windows machines logging into the domain. I was able to install the printer to my Windows machines. When you go to the printers folder in Windows, it shows the printer but says "access denied" instead of the usual "ready". If I print to the shared printer the job will go through. I am thinking it is an authentication issue because if I log into Windows machine as "root" and let it build a profile, the printer doesn't show the "access denied" message. How do I allow other users to have access to the printer?
View 1 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Dec 3, 2009
I have samba server(Fedora 11) here,but when I want to access to it from WindowXP ,the first time you need to tap in user name and password.But the next time ,you automatically log in Samba server with the user name as the first time you used. But I have not clicked the "Remeber me " option when I logged in.I want to switch user when I want to log in samba,does anybody know what is wrong ?
View 4 Replies
View Related
Dec 20, 2010
I installled it 2 weeks ago. How do I access the windows sharing from the fedora box. My windows network is on AD that runs on Win 2003 Server.? I can ping to the server, but how to access the sharing? I had look at the forum and some are very technical.
View 4 Replies
View Related
May 25, 2010
I've got a Tape drive attached to my server connected by SAS card, and am trying to copy some data across.but it fails to write, in dmesg i seescsi 1:0:1:0: Attached scsi generic sg1 type 1mptbase: ioc0: LogInfo(0x31120403): Originator={PL}, Code={Abort}, SubCode(0x0403) does this mean faulty hardware/cables?
View 1 Replies
View Related
Jan 15, 2010
I have ferora 8 in which i have installed my printer all my computer in my network is fedora i one have a windows xp comp in my network i want to install printer for that comp i tryed a lot but was unable to do it
can u guys help me how to install linux printer on windows.
View 3 Replies
View Related
Sep 18, 2010
I just installed Win 7 In VB and was wondering how can I access my printer in it?
I installed the drivers, but when I turn the printer on it doesn't register in Win 7 (VB)
View 6 Replies
View Related
Feb 20, 2010
I'm trying to install a network printer to my Gentoo workstation, but have never used printing in Linux before and am unsure of how to proceed. I'm stuck in the CUPS web interface based printer adding process, at what device and device URI to set. I have looked through the properties and settings of the printer on the server machine, but couldn't find anything relevant.The printer model is Brother HL-1430, and it's attached with USB to the Windows XP powered printer server and shared to the network. Other (Windows) machines in the network can successfully reach the printer.
View 5 Replies
View Related
Jun 3, 2010
I am running Slackware 13. There is a printer in my local network. I want to use it, so I checked online, and here seems to be the answer(the installation of CUPS does have smb backend):
Code:
/usr/sbin/lpadmin -p RicePrinter -v smb://fred:mypass@rice/INKJET -P /root/inkjet.ppd
/usr/bin/enable RicePrinter
[code]...
View 15 Replies
View Related
Jan 2, 2009
After an update to fedora 10, I cannot access my bluetooth printer any more.
I used to run hcitool to discover the printer, which still works
Code:
In the printer configuration, I used to enter a URL like this Printer URL bluetooth://000CF606C08A/
Note, the "bluetooth" protocol is not offered any more in printer setup.
I read that Fedora 10 comes with an updated BlueZ 4 package, which has an improved gnome applet.
Code:
The applet discovers the printer, but fails pairing with the device. There seems to be short flash up of a pincode error message (which I cant read).
I've been using blurtooth printing with no problems since Fedora 6.
How to configure bluez cups printing on Fedora 10?
View 3 Replies
View Related
Feb 5, 2010
I have an old desktop that I'm trying to set up as a home backup/print server. Backup was trivial, but am having issues getting the printing to work. The printer is connected to the server running Ubuntu Server 9.10 (no gui). If I access the printer via http://hostname:631/printers/, I am able to print a test page, so I know the printer is working; however, I am having no luck from Windows. Windows can see the printer when browsed via hostname, but I am unable to connect. Windows says "Windows cannot connect to the printer" without indicating why.
From /etc/samba/smb.conf:
[global]
workgroup = WORKGROUP
dns proxy = no
security = user
[Code]...
View 5 Replies
View Related
Sep 30, 2010
I am sitting with a slight problem sharing some HP network printers (JetDirect) with my windows machines. I have cups 1.4.4 configured on my Debian PDC with samba 3.5.5. The printers in question, is configured in cups and is working perfectly, but for some reason when I try to add the printers from Win7 or Win Vista I get the following error:
"Connect to Printer Windows cannot connect to the printer Operation failed with error 0x00000006"
I had a look around and it seems that the above error code is tied in with incorrect drivers, but the strange thing is that if I create a new local port on the win machines and specify the shared printers they work. The problem then is that cups does not identify the jobs correctly. The job will be named something like "smbprn.00000264 Remote Downlevel Document" instead of the actual document name. One of the reasons for using cups is to be able to monitor printer usage so this option is a temporary solution in my mind. Can the print$ share be causing it although it is empty and no drivers has been uploaded? Neither the samba nor cups logs give me something concrete to work with (hopefully someone else can spot the problem).
Extract from samba log:
[2010/09/30 09:21:01.734938, 2] lib/access.c:406(check_access)
Allowed connection from (192.168.1.20)
[2010/09/30 09:21:01.740480, 2] lib/access.c:406(check_access)
Allowed connection from (192.168.1.20)
[code]....
View 2 Replies
View Related
Nov 6, 2010
How can I access this printer so that I can print my documents?? I am new to Fedora and I have no knowledge of CUPS but I want to be able to acces my wireless printer. When I go to printer section in preferences, I am not able to find my wireless printer.
View 2 Replies
View Related
Aug 23, 2011
When trying to install a new printer I can't get the samba to show under the network printer list. I even tried the "localhost" method & it still doesn't show. Samba is running fine & I can navigate to my shares. Even running the printer config. in the terminal result in no errors & no list.
Anyone have any ideas? This is the first I've encountered this... not even to sure what to google.
View 1 Replies
View Related
Oct 4, 2010
I'm running fedora core 13. The problem is I've installed vsftpd and it works from the local machine but when I try to connect to the ftp server using another computer on my small home network I get the following error: "Windows cannot access this folder. Make sure you typed the filename correctly and that you have permission to access this folder. Details: A connection with the server could not be established."
I've gone through the common vstfp problems post but I'm still having problems. The server is pingable from the remote laptop I'm using. I've disabled selinux:
[Code].....
I also don't see a vsftpd.log file in /var/log.
View 8 Replies
View Related
Apr 13, 2011
Two users on both Ubuntu server and Windows 7. Both users admins on Windows. Used SWAT to set up Samba. Printer is local to Ubuntu server. User A can access both file share and printer on Ubuntu server from Windows. User B can access the file share but can only see the printer, not use it. Have looked everywhere I can think of to find out why one user has access and the other doesn't on both Windows side and Ubuntu side. As far as I can tell, they are set up the same. Can anyone provide some direction on what I should look at to find out what might be preventing User B from being authorized to use the printer on Ubuntu?
View 2 Replies
View Related
