Fedora Hardware :: Marvell 88E8055 Gig-E Not Working Right?
Jan 13, 2011
Usually, someone has already asked the question I need an answer to. My issue is that my onboard gig-e NIC isnt getting a MAC address. I was wondering if anyone can point me in the right direction to getting it to work with built in kernel modules. I have a hack to make it work by manually setting it in rc.local. Sadly, this NIC works perfectly well under WinDos. I want to learn how to troubleshoot this kind of thing better, so even if you don't have an answerHere's some info:#lspci -v
Code:
05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller
Subsystem: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller
[code]....
View 1 Replies
ADVERTISEMENT
Nov 5, 2009
1) Has anyone had any luck using the above wireless adapter with any of the Fedora releases and ndiswrapper? On the ndiswrapper wiki it says it is supported but I would like to know if anyone has had any personal experience under Fedora.
2) If I install F11 from the live CD, will everything that I need to install and run ndiswrapper be included in the installation, or would I have to download and install via the full DVD? The reason I ask is because the only way this computer has internet is by using said wireless card, so I would not be able to update F11 until after setting it up.
3) If the live CD does not have everything that I need, would it be possible to download whatever it is I need prior to the F11 installation, save it to my external hard drive, and then install it after I install Fedora?
View 1 Replies
View Related
May 31, 2011
I upgraded F14 to F15; However, F15 no longer recognizes my 3 sata disks connected through Marvell controller. The controller is an integrated Marvell chipset 88SE6480. The controller has its own manufacturer driver but it was intended for RHEL 5.4 (mv64xx) and installation of this driver fails to generate mv64xx driver.
View 3 Replies
View Related
Aug 24, 2011
I bought a Rampage III Extreme Black Edition wich has a SATA III controller (Marvell 88SE9182). I try to install Fedeora Core 15, but FC15 just dont recognize any of my HDs placed in SATA III ports. Has any fellow succeed installing linux on this SATA Controller?
View 8 Replies
View Related
Jan 8, 2010
During Karmic betas, my Marvell 88E8056 did not work at all. When Karmic got released, it started working but after December update, become terribly unstable, disconnecting like every 5 minutes. It is integrated on P5Q-E mobo. Luckily, I also have Marvell 88E8001 so I switched and it works. I was thinking that new kernel broke driver, and thought that next update will fix it. But yesterday I needed both NICs, and 88E8056 is still did not work. I am using .31-17 kernel. So I do not know if my NIC died or what? Can someone with same NIC say if it works for him? Does it work in Lucid Alpha 1 ?
View 1 Replies
View Related
Apr 5, 2011
I'm currently experiencing some strange troubles installing ubuntu 10.04 /10.10 (tried both, same issue). My network connection appears to fail after some very small amount of packet is sent/received. Searched a bit around the forums here, and ended up installing the Marvell drivers (v10.87.3.3) with success. However, the issue remains. Here's the relevant info:
i386 installation
MotherboardFI lanparty dk 790gx-m2rs
Network controller: Marvell 88e8056
kernel:2.6.32-30-generic
Network config: manual (and tested working config on other computer)
[Code]...
View 2 Replies
View Related
Mar 3, 2016
I have an old Lenovo PC on which I have Debian 8.3 64bit with no desktop environment. It has an onboard Marvell 88E8056 NIC that SHOULD be able to run at 1Gb/s but the driver (SKY2) that is loaded will only do 100Mb/s.
So I try to get this thing to work with a new driver.
For that it seems I have to download it from here: [URL] ....
There I download Linux_v10.93.3.3.tar.zip which has directions on how to compile and install the SK98LIN driver.
Since I never done that before, I found this on youtube : [URL] ....
But where for him it does compile, for me it breaks off with saying missing version.h :
.<snip>
.
Check kernel header versiongrep: /lib/modules/3.16.0-4-amd64/source/include/linux/version.h: No such file or directory
./functions: line 1117: [: !=: unary operator expected
grep: /lib/modules/3.16.0-4-amd64/source/include/linux/version.h: No such file or directory
./functions: line 1126: [: !=: unary operator expected
(Kernel:3.16.0 == Header:) [ OK ]
Check kernel functions (Changed: nothing) [ OK ]
Compile the kernel (error) [ failed ]
An error has occurred during the compile proces which prevented the installation from completing. Take a look at the log file install.log for more information. Installation of package failed.
root@debian:~/setup#
View 0 Replies
View Related
Sep 29, 2009
On an Asus P5Q motherboard, CentOS 5.3 x64. (Separate thread as the other one has turned into just a discussion on my lm_sensors issue). The motherboard's primary SATA controller is the Intel P45 chipset. 6 ports, set to AHCI in BIOS, and all works a charm. Attached are 6 x SATA drives (2 x OS, 3 x data RAID5, 1 x backup). There is also a Marvell chip that provides PATA and also an underlying SATA chip (2 ports) that can do what Asus call Drive Xpert (stripe or mirror RAID) or be set to just standard SATA ports.
It's a SIL5723 behind what CentOS sees as "03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)". Physically the Marvell has only a single optical drive attached to its PATA interface. CentOS has loaded marvell_pata (I assume for the PATA side of it) but I have no /dev/cdrom or /dev/dvd so no optical drive CentOS is trying to use 'ahci' for the Marvell's SATA ports. Dmesg tells me that when it 'sees' them as it boots:
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata7: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd00 irq 16
ata8: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd80 irq 16
ata9: DUMMY
It attempts to read SATA drives attached to it, but it just errors trying to access them on boot (e.g. "ata7: failed to recover some devices, retrying in 5 secs" etc). I need the extra SATA ports, and I could really do with having a usable CDROM drive. I found a driver for the Marvell 88SE6121 from Asus. But the latest driver in that is for what it calls "RHEL 50.2" and the script fails with a "Generic Protection Error". That driver looks for kernel "2.6.18-92.el5" in its base_ver variable in the script. Changing the base ver to -128 doesn't help. I have uploaded the driver for if [URL]. Is that modifiable to work on 5.3 / soon to be 5.4?
View 12 Replies
View Related
Sep 4, 2010
I have built-in-motherboard Ethernet with this MArvell 88e8059 chip. During CentOS 5.5 install it didnt find it. then i found some page here on forums which said how to install sk98lin driver, and several people reported it working after that. Their chips were 8056 and others.. So i decided that should probably work in my case too, i installed it, and then i could see it in Network COnfiguration manager.
But during reboot, it cannot obtain IP information, and in Network Config manager it is "Inactive", setting it to Active fails to obtain IP again...
View 7 Replies
View Related
May 2, 2011
I recently bought two DreamPlugs and replaced the preinstalled aged Ubuntu 9.04 with Debian Squeeze on them.I built a Marvell Orion 2.6.35 kernel from git. OpenSSL performes lousy on this hardware (my VIA Nano with PadLock support gives me ~690 000k on 8192 size blocks):
[Code]...
View 1 Replies
View Related
May 12, 2010
I have a dual boot system (Suse 10.0 and Windows XP Pro) in my notebook. My notebook is toshiba m358, which has a Marvell Yukon Gigabit Ethernet Network Card (Marvell 88E8072) on it. My problem is this: in Windows XP Pro, the network card works well, but in openSUSE, the light on the network card does not turn on. I believe that there is no driver for the network card. I have tried several ways to solve this problem:
1. Download Marvell 88E8072's driver from "[URL]", whose name is "install_v10.85.3.3.tar.bz2", and then install it with following commands:
Code:
# tar xfvj install_v10.85.3.3.tar.bz2
# cd DriverInstall
# ./install.sh .....
Code:
# modprobe sk98lin
# WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
After I reboot the openSUSE, the light of network card is still off.
2. Follow "[URL]" to configure the Marvell 88E8072. It also does not work.
View 4 Replies
View Related
Jan 23, 2010
I was wondering if anybody can help me telling me where i could get a driver to patch my DGE-530T with a Marvell Yukon 88E8001 chipset so that i can use aircrack-ng. My OS is Ubuntu 9.10 and I am running it on an HP Pavilion dv7 1020us
View 2 Replies
View Related
Jul 17, 2009
I have a strange problem for internet. My clients (winxp - S2) can't get internet.Let me explain my scenerios. Fedora 10 with lan (eth0) having direct internet from dsl model, client (XP service pack 2) can use samba shares using dhcp (wlan0) installed in Fedora 10 box. client can ping my linux box.Now problem is: client (dosbox) can ping the google ip address (i.e ping 74.125.39.106) but can't use 'ping www.google.com'. That means ping with ip works for internet from my client. My linux box can. I can use internet from FC10 but can't use iexplorer from my client to have internet. I have enable ipmasquarding in Firewall and dhcpd is running on wlan0 for dynamic ip address of my clients.Can someone suggest me what kind of problem having I? What should i do to success iexplorer for internet? what possibly am i missing?
View 3 Replies
View Related
Dec 26, 2009
I recently moved into my room-mates house and her wireless was not secure as I was able to log on to it unsecured with my Fedora 12 Laptop. After Securing it with WPA all the windows computers had no problem getting back on to the now secure wireless. Using GNOME I went to SYSTEM then PREFERENCES and NETWORK CONNECTIONS and clicked on the wireless tab and configured wireless security tab and configured for WPA WPA2 Personal. No problems. But when I go to the gnome tool bar and click on the network and see our SSID it wants to use WEP 40bit and others methods but has no selection for WPA.
View 10 Replies
View Related
May 30, 2010
I just upgrade my fedora 11 to fedora 12 using the dvd and upgrade setup. I know that there is Fedora 13 released however now I`m with fedora 12. My problem was with sound. Sometimes the sound is working, sometimes it is not working. Here is the information for my PC:
[code]...
however If i killall pulseaudio or kill -9 PID of pulseaudio, pulse audio starts again and sound is working. I do not know every time when my sound goes off to kill the pulseaudio.
View 5 Replies
View Related
Jun 27, 2009
i have insatlled fedora 9 on a system with xp already installed on it but when i start fedora it hangs while booting. after starting the service ANACORN it hangs and same happens with fedora 10. it hangs while starting CUPS.
View 2 Replies
View Related
Jan 28, 2009
I have Fedora 10 installed. I've just made an update of my system. Things that were updated were a new kernel version with devel and also something with NVIDIA (which is my video card).
After restart of my system, compiz fusion no longer works.
I have a NVIDIA-Linux-x86-177.82-pkg1.run -file to manually install the NVIDIA-driver so the advanced features of Compiz can be utilized.
After install, the bootup screen tells me that loading the NVIDIA driver has failed. I also receive a WARNING-message.
View 14 Replies
View Related
Mar 19, 2009
I have set this up before (ie installed the drivers and had them working perfectly) but had to do a system wide re-install of fedora. Since this clean install, I've had non-stop grief with nVidia drivers. They have been downloaded and installed via yum, and on start-up nvidia.ko loads. But from with gnome I cant gain access to any 'special effects' (ie desktop effects wont enable).
View 4 Replies
View Related
Aug 23, 2009
After running my computer for a while, my volume control always messes up. I wonder if it is some app. Mute, raise, lower volume all fail, and so does the little volume icon in my notification area. When the computer boots up things are fine. I can do some more testing later to try and pinpoint the source but I need to wait a few hours for a download to finish. I can still use Advanced Volume Control and all the options there work.
View 5 Replies
View Related
Sep 4, 2009
When i m doing "yum Update" then error is come:
View 4 Replies
View Related
Jun 4, 2010
The system-config-lvm UI on my updated F13 installation ws all LVs as "Unmounted",although they are mounted. Selecting any LV on the UI reveals the correct properties, except the mount point.And, I am able to - create new LV, delete LVs.I am not able to - change anything on a mounted LV (which the GUI shows as Unmounted). Getting the error message- "Logical volume is not mounted but is in use. Please close all applications using this device (eg iscsi)". My expectation is that the UI prompts the user to umount the LV or unmounts it automatically.
View 1 Replies
View Related
Feb 9, 2010
fedora 12 server that I use as a web proxy to encrypt my connections to the web. I have ssh running on port 443 ( a wifi I use blocks anything but 80 and 443 for some reason,) and open up a tunnel port 3128 (squid) and send my firefox traffic through it. I have a couple friends I have setup for the same thing.
I am highly paranoid, and only allow authentication with a keypair. I've been using this setup on fedora 8, gentoo, fedora 11, and now fedora 12. I have used the same keys, copying them when I reinstall. I just reinstalled fedora 12 again (I had the same keys working on 12, I reinstalled to put in a bigger hard drive.) My keys work (I have one for putty on windows, and one for my linux desktop / laptop, both keys work fine.) I didn't need to change anything to get them working. However, my 2 friend's keys don't work. They get denied. The error message displayed is "Permission denied (publickey)."
the /var/log/secure error is
"Feb 8 19:49:51 server1 sshd[3872]: Received disconnect from 256.256.256.256: 11: No supported authentication methods available"
[code]....
View 1 Replies
View Related
Feb 7, 2009
it turns out its wireless card is detected as a USB device (lsusb output: "Compaq Computer Corp. Wireless LAN MultiPort W200"). If you google for help with this, you'll see references to MUCH older versions that are out there (some for a 2.4 kernel) as well as a message implying that the driver is now available in the kernel (the USB one isn't). I wanted to share this how-to to assist anyone else who had the same hurdles I did. Unfortunately, you will have to compile your own kernel module, and the module relies upon firmware that must be first downloaded from the card itself. Here are the steps I took:
1. yum install kernel-devel make libgomp binutils kernel-headers glibc-headers glibc-devel gcc perl-URI subversion patch wget
2. Obtain and patch the latest version of the orinoco_usb driver: - cd /tmp - svn co https://orinoco.svn.sourceforge.net/...o/branches/usb
This places the latest code into a subdirectory called "usb"
- wget -O orinoco_usb-2.6.27.patch "http://sourceforge.net/mailarchive/attachment.php?list_name=orinoco-devel&message_id=48F7883C.4010109%40gmail.com&coun ter=1"
[Code]...
5. That should do it - you ought to be able to enable and disable your card (on this Compaq laptop, there's a button on the top), then NetworkManager will see it and away you go. Be warned that this driver has not historically been well maintained, so it currently doesn't support WPA encryption of any sort.
I hope to make an RPM of this someday to make this even easier for users, depending on the interest.
View 4 Replies
View Related
Feb 11, 2009
Automount works for CD but not usb.
In earlier versions, of RedHat, plugging a USB thumb drive which works on windows
would at least produce a message with the address /dev/Something? but this release does not.
How can I determine the hardware address so I can at least manually mount the device if in in /var/log/messages ?
I have tried different thumbdrives and a palm drive trying to get a reaction?
View 1 Replies
View Related
Apr 6, 2009
I tried doing nfs mount and it doesnt work for me. The following is the output of my "showmount -e <IP>"
Export list for <IP>:
/home/apchitra/workspace *
/home/apchitra/workspace/canmore/sdk/fsroot_2038 *
I am trying to mount one of these directories from other machine and it doesnt work. Gives me the following error.
Looking up port of RPC 100003/2 on <IP>
Looking up port of RPC 100005/1 on <IP>
mount: server 16.0.0.0 not responding, timed out
Root-NFS: Server returned error -5 while mounting /home/apchitra/workspace/canm8
VFS: Unable to mount root fs via NFS, trying floppy.
[Code]...
View 8 Replies
View Related
Sep 4, 2009
Something happened yesterday and now DNS is not working. I have checked /etc/resolv.conf and the settings are correct. I can ping my DNS servers and perform name lookups with dig but nothing else works. Normal applications do not work because of this.
View 3 Replies
View Related
Sep 9, 2009
I resently installed Fedora 11 x86_64 on my Thinkpad T61 laptop. After the installation it updated 415 packages. The problem is that after the update the graphical interface for the packages manager no longer works (i come from Debian so i`m not sure exactly how it is called). Of course i can still use yum (and i probably would use it anyway because i`m used to using apt from the command line) but i don`t like to have something broken on my system.So does anyone have an idea what might be causing the problem? The graphical interface for the packages manager starts and i can search for packages and it shows the results bu as soon as i mark something for instalation and start the installation it hangs up and the window soon turns grey and unresponsive. I`ve tried waiting for some time but nothing seems to happen.
View 1 Replies
View Related
Sep 29, 2009
The problem:
glxgears/glxinfo works on my PC vista laptop
glxgears/glxinfo works on my fedora 11 linux workstation
glxgears/glxinfo does not work when I SSH in from my PC or from other unix workstations. I need this to work so I can do relatively low-powered graphics work on the workstation remotely.
Other x-windows graphics/programs work fine.
The error message is uniformly:
I didn't install fedora (our sysadmin did), but he is out of ideas as to why this isn't working.
View 7 Replies
View Related
Oct 8, 2009
I just installed Fedora 11 on my PC and can't seem to get the Win key to work at all I tried putting entries in xmodmap, tried modifying xorg.conf, and also tried setting altwin:super_win in the config settings. But nothing seems to work. Somehow, my Win key seems to be working as Meta instead of Super. From emacs, if I press Win+x, it works like Meta+x.
View 14 Replies
View Related
Oct 10, 2009
I un-installed ndiswrapper. Now my wireless is not working. How do I re-engage the native Linux driver? In gnome in network manager my USB wireless device is not being picked up.
View 2 Replies
View Related
