Fedora :: 11: Setroubleshootd's Locate Overloads CPU?
Aug 6, 2009
OS: Fedora 11, x86_64.Are there means to nice the 'locate' processes setroubleshootd spawns?I am using Fedora 11 on a server with large number of files, SELinux is currently in permissive mode, and setroubleshootd periodically spawns processes running 'locate', it gobbles up CPU time.I haven't found any clues in setroubleshootd config file.Nothing in its logs, either.Is there a way to shut setroubleshootd in Fedora 11? There is no such service any more, and the way 'locate' works makes everything quite slow.
View 1 Replies
ADVERTISEMENT
May 11, 2011
I upgraded from Fedora 13 to 14 over the network. Everything seems to have worked. The one problem after my install is that I have noticed that setroubleshootd consumes alot of memory.
[Code]
It doesn't take long for setroubleshootd to jump in memory usage. I can kill the process but it will start up again. I have tried disabling the service but it doesn't show up in /etc/init.d. # service setroubledshootd stop setroubledshootd: unrecognized service So I am not sure what I can do to resolve the issue with setroubleshootd besides killing it off every 15 minutes.
View 3 Replies
View Related
Jul 21, 2011
Just noticed from the "top" command that one of my least heavily used box is swapping excessivly by a program called setroubleshootd. Following is the top section of the "top" command sorted by Swap used for both boxes. Also tried checking it out to see if there's a "service setroubleshootd restart" but when I checked the status I got the following.
Code:
[root]# service setroubleshootd status
setroubleshootd: unrecognized service
Lightly loaded box with lots of swapping
Code:
Tasks: 85 total, 2 running, 83 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 98.0%id, 1.7%wa, 0.0%hi, 0.3%si, 0.0%st
Mem: 1026880k total, 983528k used, 43352k free, 59604k buffers
Swap: 2064376k total, 355692k used, 1708684k free, 121996k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ SWAP COMMAND
3319 root 15 0 1202m 665m 5748 S 0.0 66.3 23:29.99 537m setroubleshootd
3845 root 34 19 253m 14m 2188 S 0.0 1.5 0:34.41 238m yum-updatesd
3841 gdm 16 0 216m 5300 4236 S 0.0 0.5 0:00.15 211m gdmgreeter
3822 root 18 0 190m 2208 1568 S 0.0 0.2 0:00.00 187m gdm-binary
3824 root 15 0 185m 3948 3236 S 0.0 0.4 0:00.11 181m gdm-rh-security
3725 root 16 0 163m 2532 1920 S 0.0 0.2 0:00.00 161m gdm-binary
3500 root 18 0 130m 2140 1240 S 0.0 0.2 0:00.00 128m cupsd
Heavily used box with little swapping
Code:
Tasks: 118 total, 4 running, 113 sleeping, 0 stopped, 1 zombie
Cpu(s): 4.7%us, 0.3%sy, 0.0%ni, 94.7%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
Mem: 2059580k total, 1928356k used, 131224k free, 162032k buffers
Swap: 4095992k total, 12k used, 4095980k free, 1336632k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ SWAP COMMAND
3842 root 34 19 253m 17m 2196 S 0.0 0.9 0:34.20 235m yum-updatesd
3284 root 15 0 301m 77m 6004 S 0.0 3.9 2:23.30 223m setroubleshootd
3840 gdm 16 0 216m 16m 7064 S 0.0 0.8 0:00.43 199m gdmgreeter
3814 root 18 0 190m 2352 1644 S 0.0 0.1 0:00.00 187m gdm-binary
3816 root 15 0 185m 4112 3384 S 0.0 0.2 0:02.90 181m gdm-rh-security
3724 root 15 0 163m 2588 1976 S 0.0 0.1 0:00.00 161m gdm-binary
3465 root 18 0 141m 14m 1824 S 0.0 0.7 0:00.06 127m cupsd
12799 daemon 18 0 103m 3708 648 S 0.0 0.2 0:00.00 100m httpd
12396 daemon 15 0 112m 13m 3440 S 0.0 0.7 0:00.99 98m httpd
3556 root 18 0 103m 5260 2208 S 0.0 0.3 0:37.68 98m httpd
11778 daemon 15 0 117m 19m 3144 S 2.3 1.0 0:01.76 98m httpd
12750 daemon 15 0 106m 9096 2860 S 0.0 0.4 0:00.04 97m httpd
12673 daemon 15 0 110m 12m 2876 S 0.0 0.6 0:00.23 97m httpd
12693 daemon 15 0 110m 13m 2876 S 0.0 0.7 0:00.18 97m httpd
12666 daemon 15 0 105m 8132 2888 S 0.0 0.4 0:00.19 97m httpd
12729 daemon 15 0 112m 15m 2968 S 0.0 0.8 0:00.11 97m httpd
12588 daemon 15 0 110m 12m 2984 S 0.0 0.6 0:00.54 97m httpd
View 3 Replies
View Related
Apr 9, 2010
I would like to know if I want to vi /proc/sys/net/ipv4/ip_forward, but assume that I don't know the path of ip_forward, is there a way to tell where is it?
View 3 Replies
View Related
Mar 12, 2009
I am running a version of Fedora 10 on my PC for development puposes. The strange problem I have encountered is that I cannot locate the C compiler being used. I have looked for G++ GCC, etc but cannot find it. Does anyone know the compiler being used or the command to find it through command line.
View 5 Replies
View Related
Sep 8, 2010
Am looking to visit a site that requires shockwave player. Firefox cant seem to locate a plugin neither does yum.
View 8 Replies
View Related
Nov 6, 2010
I usually upgrade using the network install CD image. However, I cannot locate one for F14. Is there one? If so where? If not, should I just wait for it? I recall that the F13 network install came out awhile after the F13 release.
View 2 Replies
View Related
Jul 6, 2010
I am using Oracle Enterprise Linux version 4 update 7.
Sometimes I have to access large files with thousands of lines in them and I would like to locate a particultar word. e.g.
vi /etc/passwd.
The contents of file passwd are displayed.I want to find a username of joe assuming the passwd file is 2000 lines long.
I would like to use a linux command that will locate joe and highlight in the passwd file as to where word joe is.
Is there a linux command that can do this?
View 5 Replies
View Related
Dec 5, 2009
I was trying to install Lingua-EN-Fathom when I got the error:
Can't locate ExtUtils/MakeMaker.pm
Then I try to install ExtUtils-MakeMaker. The Makefile.PL works fine but when I do "make", I got the error:
make: *** No rule to make target `/usr/lib64/perl5/5.10.0/x86_64-linux-thread-multi/CORE/config.h', needed by `Makefile'. Stop.
View 4 Replies
View Related
Jun 12, 2010
I know there is a command that will show what rpms are installed on a machine that are no longer available in a yum repository, but I can't remember what it is! It is useful to identify packages left over after an upgrade that are no longer needed, or to identify third party software.
View 2 Replies
View Related
Dec 16, 2010
After installing Fedora 14, following error messages appear at boot:
Code:
View 6 Replies
View Related
Jul 16, 2010
I did recently install aria2 and everything installed smoothly. but i am not able to locate it. I know it will be in the applications->internet but its not there.
View 7 Replies
View Related
Nov 3, 2009
Purchased Toshiba Satellite laptop L505D-S5983 November 30, 2009. Separated partitions and inserted Fedora 11 disk. Computer responded and asked question regarding what I wanted to do and I selected install. Answered question regarding English, US, then response given "Cannot locate drive" --> now need to manually select drive among myriad of drives listed.
The CD-ROM component in my computer is the HL-DT-ST DVDRAM GT20F ATA Device.
Manufacturer value states "(Standard CD-ROM drives.
View 1 Replies
View Related
Apr 26, 2010
I've got a vmware install of Fedora 12 running as a server. This install has the /etc/sysconfig/network-scripts/ifcfg-eth0 file configured with the proper info and the service has been restarted. When I run ifconfig I only get the loopback interface, when I run ifconfig -a I can get the eth0, but without the pre-configured ip address. When I enter ifconfig eth0 up I can activate the interface, but without the afore mentioned ip address. I need to be able to yum ssh, install it, and run it with rsa keys. Can do none of this without an interface obviously.
View 3 Replies
View Related
Oct 20, 2009
I installed acroread on my 64-bit Fedora 11 and when I try to run it, I receice the message,
Quote:
HTML Code:
Quote:
View 3 Replies
View Related
Dec 9, 2010
I have a Dell Inspiron 1420 laptop running on Windows 7, I just download the iso file for Fedora 14 desktop edition, the live media download, and burned it to a new CD-RW, I can't seem to locate the file I need to boot it.
View 11 Replies
View Related
Nov 4, 2009
New Toshiba satellite model L505D-S5983 used for Fedora 11 install. Install dvd and computer responds with what do you want to do...I enter "install"begins uery.. English-->US---then "unable to locate driver"/select driver...."What driver do I need to select or obtain?
View 1 Replies
View Related
Jun 15, 2010
Code:
Missing components:
Is there a package that I can install that will satisfy this dependency? I am unable to locate anything other than the source here and here, but I'm also unsure if this is even the right package or if source this old is what gopdder is asking for. I'm looking for a package.
View 5 Replies
View Related
Feb 23, 2011
I did check the manpath and the files located there.just seems that some pages are missing.
View 8 Replies
View Related
Feb 1, 2011
I was trying to install vmware player 3.0 and it prompt that it require the kernel kernel-2.6.35.6-45.fc14.i686 to be compile before it start.
Quote:
Kernel headers for version 2.6.35.6-45.fc14.i686 were not found. If you
I try following but unable to find.
Code:
Nothing to do
Code:
Code:
Then I try to map to the file, but not working.
View 3 Replies
View Related
Jul 6, 2010
# mlocate
bash: mlocate: command not found
and
[code]....
View 5 Replies
View Related
Nov 30, 2010
I downloaded the iso file from fedora's official site and copied the iso to my pendrive to be able to install Fedora through pen drive i downloaded Universal-USB-Installer-1.8.1.5 and used it locate the iso file in my pen drive after Universal-USB-Installer-1.8.1.5 did its job, i booted my pc and proceeded to the installation there was a 'install on hard disk option' and chose it it asked me for a new password, my location etc. but when i chose the install option it prompted me an error saying that i dun have enough space to install fedora.how do i locate my drive during installation , so that i cud install it on my desired drive.it shows me two options, one is the pendrive while the other is "AMD something."(dun remember the exact name") whenever i select on the AMd.it gives me an error saying that i dun have enough space..
View 3 Replies
View Related
Nov 11, 2010
I am working on perl and I am stuck on tk.pm on fedora 12. It work fine on window 7. here is my code.
#!/usr/bin/perl -w
#
use Tk;
I did search on google and try diff ways, but still get the same result
View 4 Replies
View Related
Oct 14, 2010
Why there are two so similar command in Linux? and normally what are the circumstances to use each of them?
View 2 Replies
View Related
Sep 30, 2010
Anyway, the issue that I am having is that when running GDB, the program will execute perfectly fine if I allow it to run without breakpoints if I skip stepping through the function using the 'n' command, but it will provide me with the following error if I try to step through it:
35 srand( time(NULL));
(gdb) s
time () at ../sysdeps/unix/sysv/linux/x86_64/time.S:32
32 ../sysdeps/unix/sysv/linux/x86_64/time.S: No such file or directory.
in ../sysdeps/unix/sysv/linux/x86_64/time.S
This happens not just for time() but for every function that would be found in the included libraries.
I included stdlib in the code, and in fact this code works perfectly fine on another system using Ubuntu 10.04 and GDB. The source paths are identical between these two machines as well ( $cdir:$cwd ).
View 4 Replies
View Related
Aug 6, 2011
I am trying to connect my home printer to my Dell Vostro 1015 laptop that uses Linux (Ubuntu) operating system, and it tells me to enter my printer's URI or my printer's host name.
My questions are:Where can i locate my printer's URI?What Java version and Windows version are capable for linux operating system, so I can install Internet Explorer and watch videos/games that uses Java?
View 4 Replies
View Related
Nov 25, 2010
Using a Ubuntu 10.04 desktop...I just rebuilt another computer (Ubuntu 10.04-Server) and when I attempt to ssh to the box I of course have the ssh key from the old install. I get the messageQuote:Add correct host key in /home/ken/.ssh/known_hosts to get rid of this message.Offending key in /home/ken/.ssh/known_hosts:3So how do I determine which key is hosts:3? It is not the third key in the known_hosts file - I deleted that one and got the same error.As I only have 4 other computers on my network I generally just delete all entries from known_hosts when I reinstall the OS on one of the others. It is about time I learn how to do it correctly
View 3 Replies
View Related
Aug 24, 2010
Software error:
Can't locate Class/Template.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8
[code]....
View 3 Replies
View Related
Aug 24, 2015
I m Using 4.0.0-kali1-amd64 in VMplayer Debian - 64bit my internet works fine with wired and wirless as well i tried to install wcid package and that show me error see below :
I m facing some problem
apt-get install wcid-gtk
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package wcid-gtk
2nd thing is blueooth is enable but not works hcitool scan or btscanner
View 3 Replies
View Related
Nov 8, 2015
I've just recently installed Debian on my laptop and I'm currently having problems with an occasional white flickering at the top of my screen.
I want to rule out whether this is a driver issue since at boot, just before the GUI pops up, I get a handful of error messages complaining about missing firmware.
So my first problem is rather simple: I'd like to actually read these messages in full but I cannot find them in /var/log/syslog or /var/log/dmesg.
View 3 Replies
View Related