Debian :: Rtorrent Through Schroot Not Starting On Boot?
Apr 15, 2010
I am running Lenny, but I wanted to use a newer version of rtorrent, so I am running it via schroot. I have an init.d script from the rtorrent website that would automatically start rtorrent on boot, but now I am running rtorrent through schroot, it doesn't work anymore.I believe it may be something in my rc.# folders. I seem to remember adding a command to end all schroot sessions when shutting down the ompur, and I was thinking that it might be interfering with rtorrent starting correctly.Any tips on how I troubleshoot this? Here's a file listing of my rc2.d folder:
README S16openvpn
S20cups S20noip2
S20rtorrent S24dhcdbd S89anacron
[code]....
View 1 Replies
ADVERTISEMENT
Jul 16, 2010
I can manually mount /sys on the /chroot/sys but within the chroot it's not showing up. I see from outside the chroot that it's mounted to a directory within the chroot, but within the chroot it's not visible. /tmp /proc and /dev are visible, just not /sys.
View 5 Replies
View Related
Aug 22, 2010
Im using rtorrent on my 2.97ghz celeron D with 512mb ram and 160gb hd (ide) and when im downloading with rtorrent the cpu goes 85-100% usage and the whole computer get slow. iv got 100mbit download.. so i download in 11.4MB/s.. could it be the harddrive? using debian 5.. fresh install..
View 6 Replies
View Related
Jun 3, 2015
I just installed debian 8.0.0..I installed it without "desktop-environment" during tasksel, but instead installed it with "sudo apt-get install xorg gnome-core" atferwards.I want x-win to be present but I do not want it to start during boot.
Adding "GRUB_CMDLINE_LINUX_DEFAULT=text" to the grub config used to work but for this new debian it does not change anything. Yes, I did do update-grub2 after editing the grub file, and I also confirmed in /var/log/messages that "text" is present with the kernel command. "sudo update-rc.d gdm3 remove" also has no effect,what I do gnome starts at boot time.
View 8 Replies
View Related
May 13, 2011
I installed the ferm firewall with aptitude in the debian squeeze, the ferm init script is installed to the /etc/init.d and it's enabled in the /etc/default/ferm:
# configuration for /etc/init.d/ferm
# Enable the ferm init script? (i.e. run on bootup)
ENABLED=yes
View 3 Replies
View Related
Jul 19, 2011
I'm trying to sync my clock. I think I would like to do this by the "ntpd" daemon running. I think it should start up on boot, but it doesn't.
I have the following in my /var/log/syslog:
Jul 18 23:44:14 neo ntpd[1780]: ntpd 4.2.6p2@1.2194-o Sun Oct 17 13:45:13 UTC 2010 (1)
Jul 18 23:44:14 neo ntpd[1781]: proto: precision = 0.634 usec
Jul 18 23:44:14 neo ntpd[1781]: unable to bind to wildcard address 0.0.0.0 - another process may be running - EXITING
Jul 18 23:44:14 neo ntpdate[1194]: step time server 72.26.125.125 offset -0.505108 sec
Other posts say if ntpd and ntpdate run too close together, they cause one to think the other is locking a resource. It works to type "ntpdate pool.ntp.org" to manually update the clock. My Debian version is squeeze (6.0.2)
It works to start the ntpd daemon manually:
... sudo /etc/init.d/ntp start
... Starting NTP server: ntpd.
View 2 Replies
View Related
Nov 30, 2015
I am using Debian 8 with systemd. I noticed that eth0 it is not starting automatically.
During boot process, I see this message: a start job is running for LSB: Raise network interface
View 5 Replies
View Related
Mar 16, 2010
how do i stop eth0 from starting up when i boot/login ??
View 4 Replies
View Related
Oct 5, 2010
I am facing a problem with my AT91SAM9260 customized board. Board is almost same as the evaluation kit.
I could download the binaries ( Bootstrap-v1.16, u-boot-1.3.4, linux kernel 2.6.20) successfully to the DATAFLASH/NANDFlash in my board by using atmel SAM-BA tool with usb/serialport/jlink.
Here I describe the problem.
When I power up the board, boot strap is not jumping to U-boot location, in the normal boot sequence and board stuck with bootstrap.
But when I disconnect/connect the JTAG USB cable ( provided with SAM-BA ICE) , it's jumping to u-boot location and booting the board properly. I'm getting the same error in NAND FLASH also.
I have tried one more test case.I copied bootstrap binary at the flash location, [location which is specified for u-boot binary] instead of U-boot.bin (location: 0x8400 in dataflash), I got continous bootstrap debug messages in my console. [ So can I conclude SDRAM doesn't have any problem? ]
Bootstrap code or U-boot code ?
View 4 Replies
View Related
May 24, 2010
I know this thread rumours around for some time now and it is usually not a good idea to bump it to the head, but my problem is quite similar. I have set up the script, it is run and the screen starts. But rtorrent won't start. It starts only if I run the /etc/init.d/rtorrent start manually. The init script is from here, more or less the official version. Does anyone know why a app don't start with init.d? A big problem, of course, is that there are no logs to examine why it fails in the first place. It could be a simple dependency problem, but as it starts with prio 99, even this should be fine.
View 3 Replies
View Related
Feb 19, 2010
I've been trying to get the XML RPC interface on rTorrent working for some time now, without success. I'm running Debian 5.0 'Lenny' (stable) i386 on a Intel Atom, and need to let an external application communicate with rTorrent via XML RPC.
I've hand compiled the XML RPC C (1.06) libraries and tried the default packaged version for Lenny, and tried almost all possible combinations of the libtorrent10/libtorrent11 libraries and the rtorrent 0.7.9 through to the latest 0.8.x release. As far as I can see the compilation of both the XML RPC libraries and libtorrent work flawlessly (using no special parameters for the 'configure' scripts). I've compiled rTorrent with the --with-xmlrpc-c syntax, which is also accepted, and it compiles flawlessly.
Code:
system:~# xmlrpc 127.0.0.1:5000 system.listMethods
Error: Curl failed to perform HTTP POST request. curl_easy_perform() says: Empty reply from server (-504)
However, rTorrent (running in a shell) reports
[Code]....
View 1 Replies
View Related
Oct 19, 2010
i am trying to get starting installing debian on my virtual server what is supported for IA64 and i have try'd this few different version(se bellow) and the img fail isin't boting?
debian-503-ia64-businesscard(notice diffrent version tryed to)
debian-503-ia64-CD-1(notice diffrent version tryed to)
debian-503-ia64-netinst(notice diffrent version tryed to)
I have used before virutal server and booted successfully a img file and installed a operating system sow what is wrong?
View 7 Replies
View Related
Jan 18, 2011
i am trying to install libtorrent and rtorrent from source packages. however while configuring i get this:
Code:
checking for OPENSSL... configure: error: Package requirements (openssl) were not met:
No package 'openssl' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.
Alternatively, you may set the environment variables OPENSSL_CFLAGS and OPENSSL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. i ve come to "PKG_CONFIG_PATH" a lot of times while trying to install something manually on fedora.
View 8 Replies
View Related
May 3, 2009
i'm having hard times trying to get rtorrent working on two CentOS boxes (one is 5.2 and the other 5.3, both x86_64)
i'm using rtorrent RPMs provided from rpmforge
they install fine, starts fine ... but there's simply absolutely no traffic at all !!! I'm sure ISPs are not blocking torrent (they can be shapping, but blocking i'm pretty sure they arent). And when i say there's no traffic, i mean rtorrent cant even download the torrent file when i inform the [URL] from inside rtorrent. It stays there on 0% and there's no download.
if i download the file from the console, with wget for example, i can download it successfully.
i have already tcpdumped the machine and i can confirm rtorrent is not even generating any kind of traffic. NOTHING.
do anyone got rtorrent from rpmforge working fine on CentOS 5.2 and 5.3 x86_64 boxes ?
it should be simply .... at least it was on Fedora 8 and 9 that i used before start using CentOS ...
View 4 Replies
View Related
Jan 16, 2010
here it says that i can send an email on complete, but i dont havew the newest version of rtorrent, [URL] how do i set rtorrent 0.8.2 to send an email when finished?
View 1 Replies
View Related
Apr 22, 2010
I've been using rTorrent for a good two years now, and it's been running smoothly until about 6 months ago when random crashes and freezes would occur, between once per day and once per week. (I think it freezes if I run in screen, and crashes if I run it directly.) I've updated both rtorrent and libtorrent, updated cURL, and searched the internet near and far for a solution. I finally got this output (pastebin) after a crash today. I'm not sure how far up it goes, mainly because I'm not sure how I can scroll up the terminal window, and syslog doesn't seem to be of any help. Bottom line, I have no idea what rtorrent/libtorrent are doing, and random crashes are becoming very frustrating. For what it's worth I have a very large library (2000+) of shared files. Using version 9.04
View 3 Replies
View Related
Sep 10, 2010
I'm running rtorrent 0.8.6/0.12.6 with the rtorrent.rc below. I have watch directories set up and all the torrents picked up from the watch directory will automatically resume after a few seconds if I try to pause them. This is not a problem with manually added torrents. Everybody that uses rtorrent uses watch directories why should mine be a problem?
View 1 Replies
View Related
May 14, 2010
I set up some a kind of home network via wireless router, one computer is dedicated for a rtorrent client.Now I want to handle this rtorrent remotely from my desktop (not only via console or screen on a rtorrent host). I want do the following things: a) start b) close and most important load new torrents on demand from my desktop.
View 3 Replies
View Related
Mar 29, 2011
I have a CentOS 5.5 server running rTorrent + ruTorrent installed according to this guide: [URL]
Up until now it worked perfectly. But when following this guide for another projekt: [URL] it asked me to do yum -y update and reboot. Alot of packages were updated. Now it won't work anymore.
ruTorrent says:
"Torrent list not yet available, connection to rtorrent not established"
and
"Bad link to rTorrent. Check if it is really running. Check $scgi_port and $scgi_host settings in config.php and scgi_port in rTorrent configuration file."
rTorrent says:
"Could not read resource file: ~/.rtorrent.rc"
The rtorrent process is running. scgi_port/host are correct.
View 2 Replies
View Related
Jan 31, 2010
I am running rtorrent on a remote server mainly for seeding torrents. However, I am also using it to download new media.
I wish to share the downloaded torrent media on the web server. This works great for torrents that have finished downloading, however, for torrents that are in the process of downloading, such as large multi-GiB torrents which have slow seeders or no seeders, this creates an issue.
The problem is that I have set the rtorrent default download directory to be visible on the web server. Which is what I want, so that people can get the downloaded media via a web server. Then, when I drop a new torrent into the directory that rtorrent watches, it will start downloading the media to the web servers visible directory. When it finishes the download, then it works the way that I want. So that the media is available both as a web download and also as a torrent download.
The issue is that when a download is in progress, media that is available on the web server is incomplete.
I can manually close a torrent and manually move the media to a different location, then manually tell rtorrent to use the new location for the torrrent (^o)... but that is doing it manually... and if I need to do this with a large number of torrents, it takes a very long time.
I want to automate that so that I don't have to mess with it at all. A lot of other software such as utorrent and such can do this automatically, but it seems that feature is missing from rtorrent.
rtorrent does offer a scripting function in it's config file that can start a script on completion of a torrent file, however, I have not been able to figure out how to automaticaly stop a torrent seed, move the torrent media to a different location and then tell rtorrent the file is in the new location, then start up the torrent again. Moving a torrents associated media to a new location also initiates a hash check when the torrent is started.
I am not going to use different software. Since rtorrent is shell based and uses curses, it doesn't require GUI features. That saves something like 150 megs of memory for disk caching, etc. rtorrent kicks MUCH ass for this purpose and it uses a tiny amount of system resources.
I use screen with rtorrent so that it will run without having to be logged into the system.
I also need to limit the bandwidth on Apache so that people can download with the web if they absolutely must, but I would prefer that they used the torrent files. So, I would like to slow down their downloads quite a bit so that more bandwidth is used with rtorrent.
As with most Linux issues, there is more than one way to do something. The problem is, I can't even figure out one of those ways right now.
View 2 Replies
View Related
Mar 11, 2011
After the last batch of upgrades, rtorrent spits the following error:
Code:
rtorrent
Caught Segmentation fault, dumping stack:
0 rtorrent(_Z8do_panici+0xc4) [0x439d64]
1 rtorrent(_ZN13SignalHandler6caughtEi+0x32) [0x4726a2]
2 /lib64/libc.so.6(+0x340b0) [0x7fe901c380b0]
3 /usr/lib64/libgcc_s.so.1(_Unwind_Resume+0x56) [0x7fe901fb97f6]
4 rtorrent() [0x500041]
Aborted
I removed rtorrent, libtorrent, libsigc++ and reinstalled them from Ponce's -current repository, but it hasn't helped.
View 7 Replies
View Related
May 29, 2009
I'm completed new to Linux and centos. I've tried to install rtorrent and installed these packages:
Openssl:
=======
[root@server2 bin]# rpm -qa | grep openssl*
openssl-perl-0.9.8e-7.el5
openssl-devel-0.9.8e-7.el5
openssl-0.9.8e-7.el5
openssl-devel-0.9.8e-7.el5
openssl-0.9.8e-7.el5
[root@server2 bin]# yum list installed openssl*
Loaded plugins: fastestmirror, priorities
Installed Packages
openssl.i686 0.9.8e-7.el5 installed
openssl.x86_64 0.9.8e-7.el5 installed
pkg-config:
=======
pkgconfig.x86_64 1:0.21-2.el5 installed
libsigc++
======
libsigc++20.x86_64 2.0.17-1.el5.rf installed
libsigc++20-devel.x86_64 2.0.17-1.el5.rf installed
cUrl
====
curl.x86_64 7.15.5-2.1.el5_3.4 installed
nCursess
======
ncurses.i386 5.5-24.20060715 installed
ncurses.x86_64 5.5-24.20060715 installed
ncurses-devel.i386 5.5-24.20060715 installed
ncurses-devel.x86_64 5.5-24.20060715 installed
For some of them I used apt-get ( yes I had to install apt first) and the other, I used yum.
But when I run ./configure in libtorrent-0.12.4 directory, I get this error at the end of it's process:
checking pkg-config is at least version 0.9.0... yes
checking for OPENSSL... configure: error: Package requirements (openssl) were not met:
No package 'openssl' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables OPENSSL_CFLAGS and OPENSSL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
What should I do to install it?
View 9 Replies
View Related
Jul 12, 2010
i ve been trying to compile rtorrent from source and while configuring i run to this: Code: checking for OPENSSL. configure: error: Package requirements (openssl) were not met: No package 'openssl' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables OPENSSL_CFLAGS and OPENSSL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. i tried to install openssl and than i came up to this:
[Code]....
View 3 Replies
View Related
Apr 3, 2011
I've set up rtorrent to move my complete downloads. But i want it to move it to a custom subdirectory according to the file.
For example.
Downloaded. i movie clip and rtorrent moves it to /media/store/eps/ but i want it to automatically move it to check the files name and put it in the right subdir.
If the file is called "Series-1" i want rtorrent to put it the subdir "Series-1" in /media/store/eps/ but if it's called "Series-2" i want rtorrent to move it to the subdir "Series-2"
All this is because my XBMC setup wont add the files to the library if i dont add as a "one-series-only"-folder.
View 3 Replies
View Related
Jul 8, 2011
I use Ubuntu 10.04 server as a base for my media center, with rtorrent as my download program. I've had to move into a smaller place where I don't have direct control over the network, and where we have a vanishingly poor DSL connection. When I start up rtorrent, every computer on the network starts having dramatic slowdowns of internet speed, even when both my downloads and uploads are throttled to 1KBps, which is as low as rtorrent will go. Unfortunately, as I said, I don't have direct access to the router. The IT guy says my media center "is sending requests to all the computers on the network like crazy". How he knows that, I don't know, nor do I know exactly what he means.
But it is only when I have rtorrent running, even when it's only running 1k each way. It was my intention to test whether or not running utorrent on my Windows box had the same effect, but it's telling me "an attempt was made to access a socket in a way forbidden by its access permissions" on all trackers, which I've also been unable to resolve. It may or may not be symptomatic of the same issue, but the UI of rtorrent is painfully slow. As in, I push the down arrow, go make myself a sandwich and watch some telly, and maybe when I'm done it's selected the next torrent. I used to use Transmission, but it used more resources and interfered with watching shows.
View 1 Replies
View Related
Dec 30, 2008
Due certain torrent sites I'm visiting I was forced to upgrade to rtorrent 0.7.9, which isn't avaiable through F8 repositories so I had to compile it myself. It went fairly smooth and I've been using it now for couple of months with no problems whatsoever.
However, recently, it started crashing on me, at the start, throwing out following message:
Caught Segmentation fault, dumping stack:
Stack dump not enabled.
Aborted
I have no clue what this is. I can assure you that I haven't altered anything on my system after I compiled the client.
Eventually, I am able to start the program, after an x-amount of tries.
I even tried to delete my session directory once. It seems to have helped at one occasion, but several days later, I was in the same trouble.
View 8 Replies
View Related
Feb 7, 2010
I can't get cups to auto-start at boot time. Running sudo cupsd manually works fine, but I don't want to have to do that every session.This seems to be affecting lots of folks. This thread claims that bug #444597 in launchpad has a solution, but I must be too stupid to see it, and the thread is closed so I can't post there.
All my rc and init files seem fine, bootsplash is off, and, of course, there are no useful boot error logs in Karmic.
View 2 Replies
View Related
Mar 19, 2010
I'm having a problem getting my MPD service to start during boot. This started a week or so ago. It's no big deal, just a pain. It start fine when I run the script in a terminal. I changed the start priority with update-rc.d. I occasionally get a segfault message in my syslog and messages log. Not sure what it means.
Mar 18 22:44:25 tony-laptop kernel: [ 1244.162897] mpd[3874]: segfault at c00 ip 0806f7d2 sp b6f2a130 error 4 in mpd[8048000+4e000]
Mar 18 22:55:28 tony-laptop kernel: [ 1907.414336] mpd[4759]: segfault at c ip 00194d1d sp b6f9bcd4 error 4 in libpthread-2.10.1.so[18d000+15000]
View 4 Replies
View Related
Jul 3, 2010
I lost power to my ubuntu box earlier today, so it didn't shut down properly. I'm now trying to start it but it keeps getting stuck at 'Starting Up' for over an hour. I've tried pressing escape to boot a different version or into recovery mode. The only difference I get is when loading a recovery mode it just puts up a flashing underscore instead of 'starting up . . .' - it still hangs there. This is a small box without a optical drive which is why I haven't tried a live CD.
I'm not really familiar with linux or boot issues.
View 9 Replies
View Related
Feb 4, 2011
However, many of those threads show that adding two lines to the file "/etc/network/interfaces" should solve the problem. I checked on my PC and those two lines are already there.. but CUPS still doesn't start properly on boot up...
View 1 Replies
View Related
