I know I was asked about wanting to change/upgrade my shell during the upgrade from Lenny to Squeeze, but I can't remember what it said, and I can't find any documentation about it online. But did something change to bash? Is this documented somehwere?Most notably I see progress messages on one line, overwriting eachother (for instance during an aptitude safe-upgrade).
View 7 Replies
I just finished reinstalling Squeeze on my little netbook using the debian-6.0.0-i386-netinst.iso and accepting just about all defaults, including that for the Desktop environment in tasksel. It appeared upon rebooting that, much to my surprise, KDE had been installed -- not the usual Gnome. Of course, there's nothing inherently wrong with KDE, but changing the familiar behaviour of the Debian Installer (i.e. to install Gnome) without warning seems a bit much to this long-time Debian user...
View 11 Replies View RelatedI use bash shell and sometimes all of a sudded, my Backspace key stops working (when this happens Ctrl + Backspace still works fine) I am not sure why this happens, but it also carries over to any vim sessions that I use from the shell. To my surprise, getting a fresh shell does not help, and the problem seems to go away as abruptly as it started.
This is what the typed characters look like, each Backspace keypress is shown by a ^? on the shell
when i ran jhbuild build as a normal user, i found below messages before it failed
Code:
Please add the files codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
progtest.m4 from the /aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.
[Code]...
how to do in Debian
1. am required to create a bash-shell script called terminator that terminates all processes of a name given to the shell script as an argument. Make sure the terminator shell script will not take any crucial file system services as arguments.
2. Show how you would configure an Ethernet card by reapplying your existing IP and network mask
3. Install a workable nfs file sharing system between your system and a remote system, using optimum values for resize and wsize.To demonstrate send a 512Mb block of random data between client and server using the dd command.Write down the relevant steps and procedures
I am getting more and more comfortable working with the shell, thus I would like to change its prompt color to my liking, as it will be easier for me to distinguish commands vs. outputs.
I've read a couple of instructions of how to change the .bashrc file and am familiar with what the codes in PS1 mean. Except, this file can be intimidating to newbie eyes.
Where exactly on the file is it that I need to make the change?
Here is what I am trying to do. I would like my prompt to like exactly like the prompt I use in Backtrack - which consist in two different colors, one for the host and another for the pwd. Here is what the Backtrack .bashrc file looks like:
# /etc/profile: This file contains system-wide defaults used by
# all Bourne (and related) shells.
# Set the values for some environment variables:
export MINICOM="-c on"
export MANPATH=/usr/local/man:/usr/man:/usr/X11R6/man:/usr/local/share/man:/usr/bin/man:/usr/share/man
export HOSTNAME="`cat /etc/HOSTNAME`"
[Code]....
I also read that in order to have the same results when I log in as root, I will have to copy the modified .bashrc file into /root
how to install and use tcshell instead of bash shell...
I run this command but it still dosent work
# yum install tcsh
after installing I use this command to setting it as a default login
$ which csh
but it not work yet...
I am running a Java application on the command line bash terminal under Mint Debian. I have JDK1.6.0_22 installed 64-bit, and the OS is 64-bit too. I have a few JAR files in the directory and a few native LWJGL libraries. When I run the application using the command line, all works fine.
Lets assume my directory where the files are is called /home/riz/MyGame. I change to that directory and this is the command I use code...
I want to change my default shell to tcsh. I used
Code:
usermod -s /bin/tcsh username
command as given at url
But if I open a new shell, it is still a bash shell.
How do I make my default shell as tcsh?
Bash shell could not find "kfontview" command, although kdebase-4.2.1-2.fc10.i386 already installed?
View 2 Replies View RelatedIs there some type of functional way to read things in the Python shell interpreter similar to less or more in the bash (and other) command line shells?
Example:
Code:
>>> import subprocess
>>> help(subprocess)
...
[pages of stuff to read]
...
I'm hoping so as I hate scrolling and love how less works with simple keystrokes for page-up/page-down/searching etc.
my environment :1.Debian 5 Lenny,2.LXDE,now my USB mouse behaviour is so strange as the following:1. when single click on the Start, then the Menu pops-up in very short time, it soon disappears. --------- what I get is my single click does not work here.2. when single click on the Terminal Shell or any Folder else, it will pop up two of them. ------------- what I get is that behaves like double click on those targets.3. when I open Iceweasel Browser for web surfing, when clicking on the Menus, none of them gives me response. and in web page which I opened, right-click in the context, nothing happened. --------what I get is that right click does not response.I tried some steps on configuration on X.org conf file under /etc/X11/xorg.conf, according to the results what I googled.... but there is still no outcomes till now.
View 1 Replies View RelatedI want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies View RelatedI have and old PC and for last years i had Debian Lenny on that and it was working great but after the Squeeze release, i downloaded the first CD image and did a fresh installation but after this it boots up with no problem (i must say since in Squeeze installation the option of creating a floppy diskette was not working properly i use SuperGrubDisk2 to boot the Debian), but few seconds after logging in, the system hangs (or maybe only the X11 since i use a historic nVidia TNT2 Riva graphic card!).
View 3 Replies View RelatedThis topic began in the Debian Development forum here I have successfully completed both the install and the after installation configuration. I have a fully functional system on this little baby, inspite of the fact that wireless (Broadcom bcm4312), ethernet (Realtek) and sound were initially broken.
There is a lot of assistance out there on the web. In the previous thread, I was having trouble installing any debian on a usb stick. The issues that needed resolving were 1. Bad stick
2. Incompatible kernels between boot.img and .iso
3. The method of copying .iso to the stick that finally worked was wget My first successful usb install was Lenny. Even though I upgraded the stock system with lenny-backports, I could not get wireless, ethernet or sound working the only connection I could get to the internet was through my 3g stick and that was not performing up to it's capability. I manually configured wvdial to get that working.
I attempted an upgrade to squeeze several times and each time the upgrade trashed the system. I finally found squeeze boot.img and .iso files from an eee pc blog. This allowed a fresh install of Squeeze and I was making progress. The little atom processor would not handle the b43-fwcutter driver, so I compiled one from the Broadcom site written especially for the atom processor. Now I had cable broadband supplied wireless. I got my ethernet working with help from the Gnome site technical specs on Network Manager. Simply changing ifupdown=false to ifupdown=true in the network manager config file.
Sound was activated by help from a blog entitled "Debian on the Dell Mini 9" My head is spinning now or I would be more specific and instructive on all I did to get this baby up and running. If anyone asks, I may do a how-to.
PS: Posted from that Dell Mini 9 running Debian Squeeze.
EDITED: Correction of typing errors.
Debian Lenny worked just great. That was my first experience of Debian. The installer recognised all my hardware and the system was soon up and running brilliantly with a few tweaks. Confident of Debian's reliability, I decided to move to Debian 6 and did a fresh install, with downloads of the new operating system rather than a distribution upgrade. The installation routines have not worked for the same computer system. I don't know if its hardware not being recognised by Debian 6 that were recognised without a problem by Debian 5??
At first, the boot-up flipped at "Waiting for /dev to be fully populated," there was a kernal panic then Debian disappeared. No signal was sent to the monitor and I had to switch off the computer manually
I was able to look into the Debian 6 OS from Arch Linux, installed on different partitions of the same hard-drive. I am able to overwrite the Debian files as root from Arch.
My i686 machine has PATA IDE drives.
Why are 2) dbus and the 3) avahi-demon failing? I need to get them started first so that I can get an internet connection and try and correct the problem with X and the wrong Nvidia driver. Is there some configuration I can do either from Arch, where I am now, or the bash prompt on Debian? Thanks in advance.
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies View RelatedMy laptop is Toshiba Portege 2000. Every time after I installed new ubuntu release, I have to replace the xorg.conf to fix the resolution problem b/c I got 800 x 600 screen only. However, after the 10.04 installation. I only got 1/2 of the screen of resolution. I cannot even see most of my terminal screen.
View 2 Replies View RelatedI go to the image site for ia64 (given that my machine has an Intel Atom N450) and put the mini.iso and netboot.tar.gz files on the key, then plug it into the machine and attempt to boot. It doesn't get recognized.
View 4 Replies View RelatedOn my squeeze OS I have texlive-latex3 installed and I wanted to install revtex package of the American Physical Society. While trying to install I was prompted to run #unzip revtex4-1-tds.zip -d /usr/local/texlive/texmf-local/ However my machine does not have /usr/local/texlive/texmf-local/ Instead it has /usr/local/share/texmf/ Will it be all right if I insert this location after -d ?
View 1 Replies View RelatedCan't understand what's going on... Running 'apt-get update' I see that diffs are downloading with a normal speed (11.3 Mbyte by 49 seconds = ~ 227 Kbyte/sec - it's OK, my 'up' limit is 384 Kbyte/sec). But - running 'apt-get dist-upgrade' I see that packages are downloading w/ around 4000 byte/sec. WTF? What's the difference between downloading packages' diffs and packages themselves?
I've changed 6 mirrors - from oficcial (ftp.us.debian.org) to local (ftp.mgts.by). I've tried netselect-apt - no result. Still normall speed on 'apt-get update' and terrifying speed on 'apt-get dist-upgrade'.
Are there any special steps I'd need to take to install Squeeze AMD64 on a server with two quad-core Xeons? I had no issues installing Server 2003 x64 and XP Pro x64 on the box, but I seem to remember seeing something somewhere about XenServer in the kernel images.
View 4 Replies View RelatedI installed sqeeze on a netbook. Having no optical drive, I created a usb install disk with unetbootin on a laptop running Squeeze stable and the "Debian 6.0.1a DVD 1" iso. Much to my suprise it installed KDE. I expected, and wanted, Gnome. At the tasksel section I checked off "Graphical Desktop Env", "Laptop", and "Standard Sysytem Utilities". I found a similar post regarding this: viewtopic.php?f=17&t=60040 But in this case the OP installed with a netinstall iso and concluded a faulty mirror was the cause. This doesn't make sense in my case as I was using a DVD image which contains, afaik, Gnome, XFCE, and KDE
There surely must be a way to explicitly choose which desktop env. one wants installed. I realize this can be done by doing a base install and using apt-get; but I'm thinking there must be a simpler way using the installer. I tried the "Expert" install and only saw the generic "Graphical Desktop" option again. I figure I must be missing something somewhere. Also, can I get apt-get to recognize my unetbootin stick as a source to fetch from? I tried apt-cdrom and different entries in sources.list but I can't figure it out. It seems wasteful to me to download hundreds of MBs of packages from a mirror when I have them locally.
Trying to install squeeze again and everything has gone ok including network connection & partitioning & retrieved 916 packages from mirror.
But now installation has stopped completely at: Configuring ca-certificates
And will not proceed further.
I'm new to the Debian, but not to Linux. I've previously used Ubuntu for a few years, so I know something about how a successful installation should look like. I'm currently using Windows 7.
I downloaded the debian-6.0.3-amd64-gnome-netinst.iso from [URL] ...., and then made a USB pendrive using the Windows version of Unetbootin. The MD5 sum for the .iso-file was the correct one, b663727d7f5b572c329cea8e2ff5e29c.
I used the usual non-graphical setup, without any special options. The installation process went without hiccups until the "Starting up the partitioner" -screen freezes at "Scanning disks...". The bar stops at 50%. It never progresses any farther, even after an hour. It doesn't give any errors either. After I pressed Alt+F4, the last lines were:
Code: Select allpartman: No matching physical volumes found
partman: No volume groups found
partman: Reading all physical volumes. This may take a while...
partman-lvm: No volumegroups found
Exactly the same happens with firmware-6.0.3-amd64-netinst.iso too, or any of the live versions I tried. The result of graphical installation was also nothing. The USB pendrive created by LinuxLive USB Creator was nonoperative in exactly the same way.
The computer is brand new, without any previous OS installations. My desktop computer has the following parts:
CPU: AMD Phenom II X6 1055T, AM3, 2.8 GHz (HDT55TFBGRBOX)
Motherboard: Gigabyte GA-970A-UD3, AM3+, AMD 970, DDR3, ATX
Videocard: Gigabyte GT 430
Memory: Kingston 2x2 GB, DDR3 1066MHz, CL7 (KVR1066D3N7K2/4G)
Harddrive: Samsung Spinpoint F3 HD103SJ
Powersupply: OCZ 600W ModXstream, ATX 2.2, (OCZ600MXSP-EU)
I've just setup a fresh installation of Debian Squeeze and am trying to configure the firewall. I ran a search for iptables and got the following results:
debserv:~# find / -name iptables
/etc/bash_completion.d/iptables
/sbin/iptables
/usr/share/doc/iptables
[Code]....
When I run an iptables command to add a rule and reboot the new configuration is lost even after I have run the iptables-save command. I can't work out where the iptables config file is/should be stored so I could try editing the file with vi.
When installing squeeze from either a dvd or cd (i've burned loads to see if it was the problem) my computer goes through the installation, until the dreaded step of "selecting and installing software" where the installation stops, and my computer turns itself off because of a kill signal sent to everything. I've tried booting with fb=false, and for some reason acpi=off, and neither of them solved the problem (acpi=off caused my laptop to turn off unexpectedly earlier) (HP 6735s, AMD64 using Turion X2, 4GB Ram)
View 4 Replies View RelatedIs there a replacement for kpowersave in Sid or Squeeze, I want to my monitor to blank 120 min, not ever 5 or 10 min.
View 3 Replies View RelatedA Linux user for about 10 years, distro hopping for half of them. Finally found peace with PCLinuxOS (great distro), and MintLinux. When Mint went over to Debian, I thought why not try the original, so here I am.Booted the dvd, checked everything was working well (excellently, actually), and started the install over an existing PCLinuxOS system (dual booting with XP). First time installed while inside the gnome system, from the desktop icon, second and subsequent times from the welcome screen after boot (only text modes were available).In all cases, everything goes fine until I partition and install the packages. Partitioning is no secret to me, unless there is a "Debian way" of doing it: went through "guided partitioning," and chose the existing PCLinuxOS partitions, 37 Gb for /, ext3 (tried ext4 later with same results), and 2 Gb for swap, both on sda (sda1 and sda5). This is a full hard-disk, just for Linux. The other disk is for XP (sdb).
Tried formatting existing partitions, erasing contents of disk, and keeping as is. In all cases, when partitioning is done, the system installation fires up and I see all packages being transferred (up to 100%). Then I have a pop-up window telling me to continue to package manager, which I do, but then I get a message saying that I am trying to install on an "unclean target," over an existing installation (even after fully erasing the disks). It asks whether to continue or not and, whatever I do, I'm taken back to system install again, and see the progress go up to 100% and the same question again.
If I go back to the install menu and ignore the message, jumping to installing grub, I get an error message saying that grub install has failed, and that's it. I can't progress further because of these error messages.If I ignore all and boot without the live dvd, I get a prompt and nothing else, and I can't even use XP. Basically, I'm stuck unless I install another distro again to have a working system.First searched this forum and Google to get answers to this problem, but couldn't find anything applicable to my case.
I am trying to install Squeeze on a HP mini netbook. I have been trying to make a USB to netinstall Squeeze and cannot get it right. I cannot get past the message
SYSLINUX 4.02 debian-2010.............. on booting.
I have tried to make the netinstall usb from this
[URL] dInstaller
I am also trying to understand this
[URL]
I have also tried using Unetbootin. Nothing works so far. Some simple steps to make a workable USB.
