I just did an upgrade from 5.4 to 5.5 and now all of the sudden my audio is gone, can't hear any videos.
It was working fine under 5.4 right up until the upgrade. Speakers are AOK,
I am using centos 5.2 with kernal version "kernel-2.6.18-92.el5" i cant play mp3 songs in any of the players provided..can u help me in installing "vlc" or any other versatile player..thnx in advance.
output of "yum list *videolan*"
yum list *videolan*
Error: No matching Packages to list
I've upgraded my computer to 9.10. There is no audio output. I don't hear the quirky little sound when I boot up. There is no playback of my music library using mplayer or vlc. There's no audio from Hulu or the TV network's direct sites. I've enabled pulse audio -- I found a reference to it in someone else's post. Medibuntu is loaded and the codecs downloaded.
View 4 Replies View RelatedI recently upgraded to Ubuntu 10.04 and my sound is not working. I have a gateway p-6860FX. i've had this trouble since 9.04 and also in 9.10, but I worked around it by adding the following to my alsa-base.conf with
Code:
Sound worked fine after that, but it doesn't work with 10.04
Here are the results of aplay -L
Code:
I went in to alsamixer and turned everything up. it didn't work.
Upgraded 5 days ago, just noticed no audio or internet icon on the panel (internet works tho).I've tried different things i/'ve found on the forum, including editing thingd in the preferences>startup applications part, nothing has worked. I've an old laptop and not sure what info you need. Audio worked fine before the upgrade..
View 4 Replies View RelatedI've upgraded Ubuntu 10.04 to Ubuntu 10.10 yesterday and I'm experiencing some issues now.
Audio is out of sync for all videos I'm trying to watch in VLC (sync was 100% fine in Ubuntu 10.04).
since i upgrade my pc to 10.04 lucid i cannot get any audio when i play videos on the web. i can have tried videos, comcast, hulu, etc... the video plays just fine, but no audio. i can go to apple.com and play videos just fine with audio. i can play any other audio just fine (mp3's, cd's, etc...). so i have narrowed it down to possibly a flash player issue. i have tried flashplayer-nonfree, flashplugin, etc... and no luck. here is where it gets weird. i saw a similar post and they tried creating a new account and it worked. so i tried that. i created a test account and all of the videos play just fine without any issue.
does anyone know if there is a way to rebuild or repair an account in ubuntu? i have checked all of the group memberships and they all match the new account that i setup.
After upgrade to 11.04, my headphones won't work when connected to the front audio jack. I checked alsamixer and they aren't muted. Switching to "analog headphones" on the volume icon didn't did anything. I can only get audio from the rear port.
View 7 Replies View RelatedI just upgraded to 11.04, and apart from an initial freakout because I didn't realize why all my settings were borked*, I haven't had any difficulties... until today. I ran my virtual WinXP machine (VirtualBox) to watch some streaming Netflix, and the sound didn't work. Sound still works under Ubuntu just fine. No idea why it didn't survive in my virtual machine.
I noticed when I started that it said there was an upgrade for the VirtualBox software, so I did that, but that didn't fix it either. I'm using PusleAudio for the Host Driver and ICH AC97 for the audio controller on my virtual XP machine. These worked before the upgrade, now... not so much. I tried switching the driver to ALSA and the controller to SoundBlaster 16 (and other different available combos, etc), to no avail.
* It turns out that crap pile, Unity, did away with all my nice custom panel layouts and configs and replaced them with something ugly, unwanted, and non-intuitive. I'm using "Ubuntu Classic" now because Unity is horrible.
following chained updates of my music server from 10.04 to 11.04 I no longer have any sound, which is sort of bad for a music server...Primary soundcard in the setup is USB So I tried the command posted in various "no sound" threads
sudo aptitude --purge reinstall linux-sound-base alsa-base alsa-utils linux-image-`uname -r` linux-ubuntu-modules-`uname -r` libasound2
Which reinstalled stuff as expected, except had this error in the output: Couldn't find any package whose name or description matched "linux-ubuntu-modules-2.6.38-8-generic" Could the error be because of backports?
aplay -l helpfully reports aplay: device_list:240: no soundcards found.
and the output from
wget http://www.alsa-project.org/alsa-info.sh -O alsa-info.sh && bash alsa-info.sh
can be viewed here:
http://www.alsa-project.org/db/?f=cb...54c3f65b70dec7
I have just upgraded to Fedora 14, with some hope that a F13 kernel crash issue would be resolved. Alas, not, and I have lost audio in one of my sound cards. I am using 2 sound cards in my computer. The first one (VT 1708 on the M2V MX SE motherboard) is used for FLDIGI (ham radio program). The other one (Creative Labs SB Live!) is tied to a speaker/microphone. At some point in mid 2010, I started getting kernel crash reports (not sure which kernel version this started), and the VIA VT 1708 audio controller stopped working. The SB Live! card works fine.
From mesg, I get:
[9.181148] WARNING: at drivers/pci/pci.c:105 pci_ioremap_bar+0x2c/0x5b()
[9.181186] [<c05c36ad>] ? pci_ioremap_bar+0x2c/0x5b
[9.181194] [<c05c36ad>] pci_ioremap_bar+0x2c/0x5b
[9.181299] ALSA sound/pci/hda/hda_intel.c:2510: ioremap error
I've just pulled out the SB LIVE! card to see if it is causing the VT 1708 controller to fail...there appears to be no interaction.
From lspci -v, I get:
20:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10)
Subsystem: ASUSTeK Computer Inc. Device 8290
Flags: fast devsel, IRQ 17
Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
Kernel modules: snd-hda-intel
So it seems to know it's there. How to get my sound back (and get rid of this kernel crash every time I start my computer)?
My audio worked completely perfectly running Fedora 14. I upgraded to Fedora 15 and discovered my audio no longer worked. As far as I know I didn't change anything. I do hear random pops and clicks from my speakers every few seconds. It's a bummer because this worked out of the box on Fedora 14 without any screwing around, and now it's totally broken in fedora 15. Everything else about my upgrade has been going pretty well, but life without sound is not nearly as fun and it's frustrating to have something not work that used to work just fine.
Here is some information and things I've tried:
- Just for grins I booted from the Fedora 15 live CD and observe the exact same issue as I see when I boot from my HD (just pops and clicks out of the audio.)
- motherboard: ASUS M4A88TD-V EVO/USB3 (using onboard audio)
- lspci reports: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
- cat /proc/asound/card0/codec#0 | grep -i codec reports: Codec: Realtek ALC892 (this is what the motherboard manual lists as the audio hardware.)
- I've run pavumeter as some have suggested and I see outputs on both left/right channels when audio is playing (but still hear nothing but clicks and pops.)
- I've run "alsamixer -c 0" and verified all my levels are maxed out.
- I've opened up the sound settings dialog box and made sure the correct hardware device is selected, tried different profiles, tested left/right speakers, still no progress at all.
- I know I have the speakers on and plugged into the correct output jack, but just for fun I tried plugging the speakers into each of the other possible jacks, but that didn't help.
- lsmod (fedora 15) reports:
I have been using the streaming audio feature in Firefox for years, and have upgraded Ubuntu with each new release. I've never had a problem with streaming from my favorite radio stations until I upgraded to Natty. If I know the IP and use Audacious or another client, I can still stream through them-- but not from my browser any more. Flash-based content works OK too.I have upgraded two computers from 10.10 to Natty (desktop and laptop) and it has happened with both. the desktop is the 64-bit system (AMD), and the laptop runs the 32-bit OS (Intel). We have two other computers still running 10.10, and they're both still OK. I have uninstalled and reinstalled the xine plugin (which seems to do most of the streaming), VLC, and a couple of others. No luck. I don't think I see any gaps between the codecs installed for the 10.10 computers and the ones running Natty.I tried Chrome -- same result.
View 1 Replies View RelatedI am running a 64-bit version of lucid that I just upgraded the other day. At first everything was working fine, but after some upgrades (don't remember which ones) I get an oss4-dkms error and I have no audio.
I have tried a bunch of things that I found online, but nothing has seemed to work and at this time I am a little lost.
Following is some information:
I upgraded to a new(er) soundcard this morning on my Slack 13.1 desktop box. I ran alsoconf and got sound working in everything but Firefox flash. It's not specifically a flash problem; flash sound works just fine in Konqueror. It's a Firefox issue. I created the following login script in order to try and force the new card to be recognized as the default:
Code:
bash-4.1$ cat .asoundrc
pcm. !default {
type hw
card 1
} ctl. !default {
type hw
card 1 }
I lost front audio after alsa upgrade to 1.0.23 headphone and mic doesn't work anymore . Anybody out there who can help a newbee.
HDA-Intel - HDA ATI SB VIA VT1708S ALSA Information Script v 0.4.59.doc
ALSA Information Script .doc
First my setup: Hardware Genuine AMD Athlon - 512 mg Mem - Nvida card & latest drivers - 80gb & 40gb drives - dvd read only & cdrw.
OS: Ubuntu 10.04 - tried standard desktop then the alt version now back to standard desktop.
Problem: Both optical drives recognise data disks and show them on the desktop. The dvd drive recognises any dvd and not only shows it on the desktop but also flashes up a requester box asking me which program I would like to use to play it. Nothing happens when I insert a music cd in either drive. Rhythm Box Music Player does not show a music cd available to play but does however show my iTouch when I connect it via usb. Btw iTouch is shown on the desktop when connected. What have I done: Fstab had no entries for either drive so I've researched and entered a line for each.The dvd fs is entered as iso9660,udf. The cdrw is using "proc" as a file system as it's the only thing that will show as mounted in Mtab. All else fails. Both drives show up in System/Administration/Disk Utility (irrespective of Fstab entries), therefore the system can see them. Also investigating through the Terminal shows both drives. how to listen to music cds on ubuntu 10.04. I wish to save my music then upload the same to my iTouch. It all worked so well in 8.04.
I have an intel DP35DP motherboard - ICH9 southbridge - set to AHCI mode. Working fine under 5.2. Yesterday I updated to centos 5.3, and got kernel 2.6.18-128.1.16 and now it can't boot. It hangs trying to read sata1 with DRDY errors and exceptions.So then I installed 5.3 from a DVD onto a new drive, and got kernel 2.6.18-128. This worked, most of the time, but occasionally gave me this error. I then updated my BIOS, and the error went away.Then I updated this new working drive to the latest kernel (yum update again) and got kernel 2.6.18-128.1.16, and now it wont boot again, with the same message.
ata1: failed to read log page 10h (errno=-5)
ata1.00 exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: cmd 60/08:00:61:4b:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
ata1.00: status: { DRDY }
ata1.00: revalidation failed (errno=-2)
ata1.00: revalidation failed (errno=-2)
[Code]....
have all ways been hiding in the background read not say a thinglets start well i look after 2 dell poweredge 2650 with 12 gig ram installed servers has been running fine onwell i though it was time to upgrade to 5 all went fine till reboot Memory for crash kernel (0x to 0x) not within permissible range ! well what i have been reading this is the norm for now What is mean by ignore it? LoLwell so i did the system keeps boot till i get to this linesbin/mingetty: /sbin/mingetty: cannot execute binary file alot, and it shows. INIT: Id "5" respawning too fast: disabled for 5 minutes ...so maybe its a memory issue so took 8 gig out left 4 in the system now it reboot alls good with only 4 gig of ram installed so is there a way to fix it to use all the ram can i get the system boot on 4 gig and then add the 8gig later on
View 7 Replies View RelatedI make upgrade from CentOS 5.4 to CentOS 5.5. Architecture is historical i386. On first boot my system was freezed by disabled earlier but not removed manualy writed xdm service. I disable it. But not found network. I see hardware address of card fe:ff:ff:ff:ff:ff. This address is not normal. But how to restore eeprom of this network adapter?
I don't think its trouble of new CentOS. I think this is random incident.Configuration of computer is Intel D510MO motherboard with integrated atom processor and realtek 8111dl nic. I know some trics about fix mac address in centos, but how to fix this address in bios?
I have installed CentOS 5.2, apache tomcat 5 already included, How can I upgrade tomcat to version 6 ?
View 1 Replies View RelatedI have encountered the same problem as indicated in this post: "udev hang after upgrade from 5.3 to 5.4"[URL]... I'm testing the upgrade path to centos 5.4 on several virtual machines prior to upgrading our production systems. I have upgraded centos 5.2 --> centos 5.4 and centos 5.3 to centos 5.4. In both cases udev hangs after the upgrade. The following message is displayed on the console: "Starting udev: Wait timeout. Will continue in the background [FAILED]"
I found another related post: "udev hangs on boot for a long time, suspect pam_console_apply"[URL]..So, I booted by VMs using the "udevdebug" option to grub and received the same error message - "udevd-event [###]: run_program: Waiting ## seconds for output of '/sbin/pam_console_apply /dev/..."
In my /etc/ldap.conf file "bind_policy hard" is commented out. I added a line "bind_policy soft" as described in the post and my VMs booted fine. NOTE: This problem is not encountered with a fresh install of CentOS 5.4 and the "bind_policy hard" option in the /etc/ldap.conf is commented out as in the upgraded systems. What is really causing this problem and how do I get it addressed? I have a couple hundred systems to update from various releases of CentOS 5 to the latest current version 5.4. It would be nice to get this bug squashed..
[Code]...
I tried to fix my audio today after flash was not giving any sound i can see the video but there is no sound a problem common on the Ensoniq ES1370 chip i tried to resolve that by taking out the card leaving only the onboard SiS audio but that didn't work iether so i then installed the ac'97 linux driver which also did not work. so i disabled the onboard audio in the bios and it is now not showing up but i also put the card back in and now that one will now show up in System > Preferences > Sound but it does show in the device in system-config-soundcard but when i try to test i do not hear the sound the card did work on non flash things before i did all this.
When i installed CentOS 5.3 from the dvd i have to take out my slave drive on the primary ide and switch it to a dvd drive i had lying around. i have 4 drives total that take all the channels. so when i installed i only had 3 connected. after installing i tried to plug the drive back in and when it starts to load grub right after post all i get is "GRUB" spammed onto the screen over and over.
i have done a yum update to a new kernel and it says i am running CentOS 5.4 now kernel is 2.6.18-164.15.1.el5 these are the only known things from holding me back from getting my full linux experience :(
I've got a Sager laptop that I'm tring to get audio working under Centos 5.5 64 bit. (It does work with the Win 7 boot). I followed FAQ #4 and did not find my Vendor:Device ID pairing on the Device ID page. Here's what I tried so far...
/sbin/lspci -v shows:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
Subsystem: CLEVO/KAPOK Computer Unknown device 7200
[code]....
I just installed centos 5.1 on my laptop. Then i upgraded it to 5.3. The problem that i am facing is that at a time only one application can use the audio device. Is this some kind of driver problem or an error in Centos? If one application is using the audio device and if i start the other application that also want to use the audio device it simply gives an error like audio device is locked by other application and is muted. In windows XP my audio device is shown as Sigmatel Audio.
View 1 Replies View RelatedRecently updated 5.3 to 5.4. The easiest upgrade yet thru yum! (Ubuntu9.04 to 9.10 failed.) Have latest yum updates including kernel(2.6.18-164.6.1.el5). Trying 2 other 2.6.18-164* choices makes no difference. When insert cd in either drive and click on Apps.>Sound&Video>Cd player get crash. Even get bug-buddy open as soon I insert cd without clicking on cdplayer. Trying to send report with bug-buddy gets me a notice that bug-buddy failed and "to try newer gnome version". Vlc works fine since it allows selecting which drive to use. Cd player doesn't give me chance to select drive before crashing. It used to.
View 2 Replies View RelatedI am new to Linux and after a lot of research I settled on CentOS to be my OS for Linux. But I am having trouble with sound right now as I can not play audio. The command system-config-soundcard opened a gui for audio configuration saying following device is detected - Intel Corp. 82801(ICH9 Family) HD Audio Controller.
Ouput for some commands are given below::
[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) .....
[root@localhost ~]# uname -r
2.6.18-164.el5
[root@localhost ~]# cat /etc/redhat-release
CentOS release 5.4 (Final)
Clicking on the volume icon gives me message that either Gstreamer plugins are not installed or sound card is not configured.
While Trying to install gstreamer using YUM, I got following message:
[root@localhost ~]# yum install gstreamer
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile .....
Setting up Install Process
Package gstreamer-0.10.20-3.el5.x86_64 already installed and latest version
Package gstreamer-0.10.20-3.el5.i386 already installed and latest version
Nothing to do
[root@localhost ~]#
So I guess gstreamer are installed but how to configure the sound card or is there any other problem.
I'm on 5.4 with a Shuttle X50 and am having a lot of trouble getting sound working on this box. In Gnome the card is detected properly and nothing is muted, but no sound comes out of the speakers when I do the test. Checked in the bios and the audio is enabled so I'm stumped... heres some info for reference:
[Code]...
there is a bug on the quad core B2 opteron cpu there is a beta patch available , but only for for 2.6.24 kernel i am very happy with my centos, and i would upgrade the kernel to try this patch i am new on linux, so i need a precise tutoriral to upgrade and keep the actual configuration of the kernel
View 2 Replies View RelatedRecently i put a DAC connected to the CL X-FI board via the SPDIF interface. Result is i can listen only one channel, the left one (hedaphone) while using the xmms, audacious.
The thing is that i'm able to listen both channels if i use the VLC configured with the same output, that is hw:2,4.
Info:
[root@kryptonbox ~]# lsmod | grep snd
snd_seq_midi 12353 0
snd_ctxfi 80557 1
snd_seq_dummy 7877 0
[Code]....