I have a virtual machine with two network interfaces. Now I wanted that both are part of different domains and tried to configure that with system-config-network. But there I only could change the the domain for the entire system. Is it possbile to edit the Domain for each network interface. If yes how?
View 1 Replies
I am currently running a apache/postfix email service on my server. I am using aliases for two addresses for example:
trscookie@serverone.com
trscookie@secondserver.com
so the emails no matter which domain receives the email trscookie always will receive the email.
However I am unable to work out how to 'reverse' this process, for example.
If i was to go to secondserver.com/webmail I would like the emails to get sent from trscookie@secondserver.com however they are currently all coming from serverone.com. Is it possible to configure this so that it is sent from the correct domain?
Here is my main.cf:
queue_directory = /var/spool/postfix
command_directory = /usr/sbin
daemon_directory = /usr/libexec/postfix
mail_owner = postfix
[Code].....
I have a network (192.168.x.x) that I want to keep closed and private for the most part. I need however to get access to some files generated on the machines in this private network. So I first tried putting two cards in a machine running centos 5.2 and connecting one to the private newtork and the other to the public network. This worked somewhat but I was not able to see this bridging machine in the private network because I could not run 2 samba instances on this machine ( I need one for the public network). So I setup xen on a machine with the 2 NIC's and assigned one card to the host dom and the other to the guest dom which was connected to the private network.
This worked ok, but the only issue was the shared disk space. I couldn't use nfs because each machine operates in a different subnet and I don't know how to export a nfs drive across domains. So I created a logical volume on a disk and mounted this in both domains.
Here comes the question now. This works some times,. but at other times I copy files from the private machine to the shared volume but i can't see them from the other domain. Also sometimes the guest domain which houses the private network server hangs during boot up saying that the logical volume has been assigned and cannot be mounted.
1) Is what I'm doing using logical volumes across domains legal (best practise, etc)
2) Is there another way for me to achieve what I want (sharing a disk partition across domains).
I have Postfix + Unix Accounts + Virtual Domains. I have a bunch of domains hosted on my machine, let's call them [URL] [URL] and [URL]... etc Until know, domain2.com, domain3.com were mapped in virtual domains to [URL] So this is how /etc/postfix/virtual looks like:
[URL]
Like I said, all mail accounts are unix accounts, so, if for example I have the user "paul" this user will receive e-mail for ALL DOMAINS. [URL]But as it turns out, I now need a COMPLETELY ISOLATED domain... let's call it [URL]. So If I create a new user, let's call it "steve" I want steve to receive e-mail ONLY on [URL] and not on all others.
I would have to redo the whole thing from the beginning. I'd have to comment out the $mydestination parameter in the main.cf file and start using only virtual domains. So if I have the following users: paul, steve, sally, megan, jenny and I want paul and steve to ONLY receive mail for domain1.com, sally and megan to receive mail for domain2.com and jenny to receive mail for domainX.com, my /etc/postfix/virtual file would have to look like this:
[URL]
I'd have to create the unix account and then start modifying the /etc/postfix/virtual file.
I would like to set up an ubuntu server to forward outside requests directed to different domains to different computers on my local network. The bind is I only have ONE public IP.
Here's an example of what I want to do.
- if a request is sent to www.first-domain.com, I want to forward it to a local server (say 192.168.0.10)
- if a request is sent to www.second-domain.com, I want to forward it to a local server (say 192.168.0.20)
and so on...
I will need to forward these requests not only for web sites but for other services such as SSH, mail, RDP, VNC, etc etc PS Once it hits those local servers, I know how to use iptables to forward them as desired.
Is it possible to add/join my Linux Suse 11.3 server with 2 domains ? I know I can do that with Windows PC, but I never try that with my Linux box. FYI, my Linux server is already joined with a domain, now I want to join my box with another domain and I don't want to take it off the current joined domain.
View 1 Replies View RelatedI am setting up a Postfix MTA that will be only sending mail for 10 different domains. We have other servers that will be receiving the mail for the domains so I only need to set up for sending on Postfix.
What my issue is I am trying to configure Postfix so that when it sends mail the header shows what domain the mail came from and not the domain the Postfix server is set to. For example....
[URL]
When I send mail from domain2.com I want it to show in the header it was sent from domain2.com and not from domain1.com. What do I need to set in postfix so that this happens? Right now no matter what domain the mail is from the header always shows the server domain and I can't have that.
I am using squid 3.1.12 as a proxy cache. All the requests initially land on a Apache server which acts as a reverse proxy server, the Apache redirects some URLs based on the context to Squid server. This Squid server based on the URL needs to forward the request to the specific tomcat server where the application is deployed. I am able to configure just for one application but how do I configure multiple tomcat servers(each tomcat having different application deployed on it). Squid needs to redirect based on the URL.In Squid.conf I made the following changes
[URL]
cache_peer abc.dev2.xxx.com parent 8080 0 no-query originserver refresh_pattern -i /ABC144020%1440 override-expire override-lastmod reload-into-ims ignore-reload
#cache_peer def.dev2.xxx.com parent 8080 0 no-query originserver
[code]....
Here Squid is deployed on my host [URL], Apache redirects any URLS with the context 'ABC' or 'DEF' to squid. Squid needs to redirect it to the individual hosts thats [URL] or [URL] based on the URL. I have commented the entry for DEF in my squid.conf as it was not working. But it does work for any URLs with ABC as the context.
I've sifted through hundreds of Google results, but I cannot seem to find a tutorial or how-to for installing and configuring Postfix on Red Hat Enterprise for use with multiple domains. We have a web server serving four websites so far. Each of these websites has their own domain that they'll require email for.
View 3 Replies View RelatedI have sendmail setup with sasl and multiple domains.I'm sure there is an easy fix for this but I can send emails to anyuser@<anyofmyvirtualdomains.dom> and it will be accepted. I'm just trying to cut down on any confusion that may occur later. Is it possible "restrict" or classify a user into a particular domain? I've setup virtusertable and aliases but no luck in accomplishing my goal.I've searched to find no particular information on this.
View 1 Replies View RelatedI have a CentOS 5.3 box with three network interfaces in it. Each interface is attached to a separate VLAN and I want traffic to stay on each network segment.What I can�t figure out is why I cannot get each interface to have its own gateway and everything gets sent through the default gateway.The basically takes my possible 3Gb total bandwidth and throws it down a single 1Gb pipe.Then on top of that, if I take down the interface (ifdown) that has the current default gateway,I loose contact to the other two interfaces.When I look at the routes, each one of the interfaces shows the gw as 0.0.0.0 and defers to the default route. So I delete the route and try to add a new route with:
[root@testsan ~]# ip route add 10.1.15.0/24 via 10.1.15.1 dev eth2
but end up with the error:
RTNETLINK answers: Network is unreachable
[root@testsan sysconfig]# cat network
NETWORKING=yes
NETWORKING_IPV6=no[code].....
how can i configure my server to send mails from about ten different domains i use google apps and want to know if its possible. Because it sends mail but all goes to spam and i have a static ip
View 9 Replies View RelatedI have a domain.com site up and running on my server. I just bought domain.net, domain.org and I would like it to point to the same site on domain.com. I am not sure how to go about doing this.I used zoneedit for my dns. So far I have pointed my 2 new domains to the same dns as my .com on zoneedit and I have created (A) ip address for them. If I did this correctly, the new domains are pointing to my server and all is left is to edit the virtualhost?
View 3 Replies View RelatedI'm following how to instruction by [url] I cannot get sites working.
View 7 Replies View RelatedI work for a college with many departments. I'd like to just deploy one LDAP/krb5 server (plus slave replicas) to authenticate all users in all departmentsIs it possible to do this?The proposed DNs for the departments matches what is done for NIS now.If anyone has any pointers or URLs that describe how to properly do this.
View 1 Replies View RelatedIf i have two domins [URL] and [URL], can i point it to same IP Address in DNS?.I had already added namevirtualhost in my Apache.If possible, is there any risk,disadvantages.
View 11 Replies View RelatedI have configured postfix to send/receive mail from/to for two domains we manage. [URL] and [URL] Most of the cases there is no issue sending out or receiving emails. However, a few users of domainY.com complained that their senders were not able to sent them email. after much investigation, we started thinking that the mailserver failed to send us email may the failing on doing a SMTP Banner issue.
Is there anyone who knows how to deal with this SMTP banner issue with multiple domain. We want different SMTP banner when doing EHLO on different server.
530 mail.domainX.com ESMTP MailEnable Service, Version: 1.981-- denied access at 11/16/10 10:51:21
530 mail.domainY.com ESMTP MailEnable Service, Version: 1.981-- denied access at 11/16/10 10:51:21
I'm running a server with two sites which both need to be able to send emails. Currently I have Postfix set up to send email via Google Apps. This works fine, but Google's servers ignore the From: address I specify and substitute the one I logged in with. Is there a way to make Postfix log into Google Apps with a different username based on what site the email is coming from? The server does not recieve any mail itself; Google recieves it and we have it set to forward it to the appropriate person's real email address. I'm only worried about sending mail.
(Postfix is not a requirement here, so if there's another mailer that can do this better, I'm open to ideas. However, sending email directly from the server isn't an option as it's a residential IP address and blocked by most of the big email providers.)
I am having a problem with apache's virtualhost directive hosting multiple domains on a single IP with Apache 2.2 on Fedora 11. For example i have domaina.com and domainab.com pointing to the same IP address and have my httpd.conf configured like so:
NameVirtualHost *:80
<VirtualHost *:80>
DocumentRoot /www/domainA
[code]....
The problem is when i navigate to either domaina.com or domainb.com i get the default Apache page. Its like it is only accepting the default DocumentRoot directive.
Im moving all my websites on a dedicated box. I had a cpanel hosting account, and now moving to a terminal and ssh system.I need some advice on choosing my mail setup. I need POP, SMTP, with multiple domains, as host for a few clients.I would like the most simple version.The server will only send +- 100 mails / day.I currently running Ubuntu Linux 10.04.
View 1 Replies View RelatedI have recently setup an Ubuntu 10.04 Minimal x64 Server. I plan on setting it up as a mail server. I need a secure server, that has spam prevention on it. Im setting up around 50 domains and would like a web based control panel. What is the most secure mail server, that i can setup for multiple domains?
View 2 Replies View RelatedI have VPS installed with Debian, NGINX, mysql, php and wordpress. By default the template gives 1 wordpress install in the /var/www/ directory. However, now I want to add more domains with wordpress to that VPS. I created a directory called /home/public_html/domain1.com and linked it to the /var/www/ directory. then I created another directory called /home/public_html/domain2.com and uploaded wordpress there. What I did next was edit my /etc/nginx/nginx.conf file with the following code:
Code:
user www-data www-data;
worker_processes 4;
events {
[code].....
how to install webalizer and configure it to push stats for multiple domains?
View 6 Replies View RelatedI want to configure a single mail server to send and receive mail from multiple sub domains of my domain. I've already installed Postfix/Dovecot and it is perfectly working for mydomain.com. And also installed roundcube for Web Mail. Can I further customize this setup to process mail to sub domains? ex- someone@subdomain1.mydomain.com, someone@subdomain2.mydomain.com, someone2@subdomain1.mydomain.com (someone@subdomain1.mydomain.com and someone@subdomain2.mydomain.com are 2 separate users. they should be able to log on to web interface separately)
Currently i use system account names as email user names. (ex - systemusername@mydomain.com). The only MX record in my domain DNS pointed to current server (mailhost.mydomain.com). I read about postfix virtual domains. but couldnt figure out how to use it to achive my target. I do not need configuration details. Just explain me the way to do it. I can do the rest my self.
I'm in the process of starting a migration from an old postfix server to nice shiney new exim server however there are a few things i'm really not clear on and i'm hoping that some one here could point me in the correct direction. Okay the postfix server at the moment does the follwoing ( i'll try and keep this simple ):
* accepts incoming mail for users on multiple domains and puts the mail in the users mailbox ( external -> internal )
*accepts mail from users on multiple domains to pass on to the outside world ( internal -> external )
Obviously the POP and Imap functions are handled by other daemons.. I'd like to replicate this sort of setup on the new exim box, however the guides i can find only help with configuring the exim system for incoming mails ( external -> internal ) for multiple domains and i cant seem to find a guide that would indicate how to do both ( internal -> external and external -> internal ) on one box. I'm guessing i may have to do some sort of auth to get exim to accept and then handle the internal -> external side of things?
I'm trying to pass multiple dpmains thru one ubuntu server to various hosts on my local network.
[url] should be sent to the /var/www folder on the local host.
[url] should be forwarded to an IIS box on my local network (owa.nunya.local)
[url] should be sent to another ubunto box on my local network (smtp.biznet.net)
I have tried placing VirtualHost entries in /etc/apache2/sites-available/default and [url]and [url] both work but [url] gets forwarded to the c:inetpub folder on the IIS box.
I am still in Linux Diapers. I setup a CENTOS SELINUX box on an internal network. So the only way I know to access it's served pages is by navigating to 10.1.1.40 from a computer within the network. The issue is that I need to create sub-domains for this server but have no Idea how to go about doing that.
Is there a way of creating an alias for the dev server so I can type something like "washington" into the web browser of a computer on the internal network instead of 10.1.1.40? Can I use a fake FQDN that on this server and get served its web pages or do I need to register a FQDN?
Background: I am creating a series of websites using Drupal and am trying to implement the multisites functionality (all the sites are run from a single code base). To do this they suggest setting up each site on a sub-domain during development. We have not yet purchase the FQDN's for the sites so I have no FQDN to setup.
Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
I have just acquired a new co-hosted server and want to get squirrelmail up and running for all domains.
I only have ssh access and have installed squirrelmail using "yum install squirrelmail" which seemed to go ok but when I try to invoke it on any domain produces a blank page.
I have looked at various installation tutorials but all seem to take it from initial compilation etc which I haven't had to do. IMAP is already set up.
I just started setting up a linux box in the office...I have some experience with ssh commands but not setting up a linux system and stuff.The box is connected to our network but I have no clue how to make windows & osx talk with it. How can I go by doing that and also setting up an apache server to be able to connect through network. Right now I have apache/linux/mysql running it works when i go to localhost, but I would also like to let all the computers in office to access it. I would guess that will deal with virtual host which I know how to setup. I just need to setup an IP.
View 19 Replies View Related
