I installed the latest CentOS 5.5 in my PC. I added some public domain projects on it. Now how can I make another boot-able CentOS iso file with all the new projects I just added? In the other words, I try to create a boot-able CD with the CentOS and all the projects on it.
View 1 RepliesI am using CentOS 5.5 and openSUSE 11.0. I use vim editor but do not know more than 1 - 2% of its functionality. In openSUSE if i open 2 text files in 2 separate terminals, i can copy the contents of one file onto another by just left-clicking and dragging the mouse over the required text. But i am unable to do this in CentOS.
View 6 Replies View RelatedI have a huge issue on this error on mysql. Can't create/write to file '/tmp/#sql the full error message is Can't create/write to file '/tmp/#sql_4761_0.MYI' (Errcode: 30)
View 9 Replies View RelatedI need to create a server for a database that has a .db file that is over 800Gb. now my first disk is 50Gb and i do the standard
100m ext2 boot
2000m swap
* / ext3
now I have a second 1.2T that i want to be /opt is there a way to set up 4kib block size in ext3 in the os install? or should I do it after the install? Is this block size even big enough?
How to Create 20 min long "silence" GSM file using Sox ?
View 8 Replies View RelatedI have a php script that I want to create a file and allow it to be downloaded. I know the dangers of chmodding a directory to 777 so I am trying to avoid this.
What I have done is logged in through ssl as root.
Navigated to the directory where the directory I want to chown is located. I then perform:
chown -R apache directory
I just ordered a new unmanagd VPS I have already Apache, PHP and Mysql the only problem I have now is how to create a A,NS and MX record in CentOS. I dont know where the DNS zone file is in CentoS
View 2 Replies View RelatedI'm trying to create a CentOS based liveCD that mounts a NFS share and executes one script there. The NFS never mounts altough while logged I can mount it with the very same command that I use in the KS.
In the %post I have :
%post --log=/tmp/post.log --erroronfail
mkdir /mnt/nfs
mount -o nolock 10.23.1.1:/csc/RemoteHome /mnt/nfs
I added the --log in order to debug, but nothing is written in /tmp/post.log. I tried redirection on the mount command with >> /tmp/debug.log but this is not written. Maybe during the post sequence /tmp is RO ? Anyway, I tried with ifup lo, service portmap start in the %post, but doesnt change (I even have a service : command not found in the live cd creator output).
Here is the remainder of the KS :
lang en_US.UTF-8
keyboard us
timezone US/Eastern
[Code]...
How can i add a PPPOE connection witch connect automatically on system start up in text mode in centos 5.4
View 3 Replies View RelatedIve installed centos freebsd and mandriva but i want to manage grub from my centos and y create successfully a boot load for freebds. But for mandriva it just doesnt work... so how can a create a boot load entry for mandriva from grub centos?
View 1 Replies View RelatedI'm running Apache on Centos 5.5, with active SELinux, and I'm having trouble getting my Perl script to write a file that doesn't yet exist to a folder which has the proper security context.
View 9 Replies View RelatedI am running ubuntu 9.10 on my pc, trying to update the bios on a thinkpad a31. I'm trying to create a bootable iso disk from the downloaded file from ibm (spsuiv69.exe) it is currently sitting on my desktop.
To be clear - I am having trouble making the .exe file an iso. I read this is the best way to update bios on a linux machine, if there are better ideas - whatever works.
I need help to do a program that emulates the following shell command line:"sort </etc/passwd | less".Using a socket in a connection-oriented setup.First the contents of the file /etc/password are being fed into the sort program. The sort program is then sorting the contents of the file and sending it to another programm called less. Less is paging the results so that you can see one page of the results at a time.I know that i can solve the problem this way:
1. Create a server program that will stream the contents of a file to any client that connects to it
2. Create a client application that will connect to the server and download the contents of the file. The program should then sort the file. After sorting the file the client should connect to the "less" program and send the sorted results
3. Create a server program that will listen for connections and download whatever is sent to it. It will then display that data one page at a time.
I install a Bind 9 with chroot in Centos 5, but the issue is the Reverse Name Resolution Zone File didn't create by default like other zone files, so i look into /var/named directory i don't find the reverse name resolution zone file even if i add this zone on named.conf
zone "1.168.192.in-addr.arpa" IN {
type master;
file "1.168.192.testsip.com.zone";
allow-update { key "rndckey"; };
notify yes;
};
I modified the thinclient OS PXES cfg file. Now I want to create bootable disk of pxes.iso file so that I can mount in Virtual box and check whether it wirks properly. I first created a normal ISO using MAgic ISO. When I try to create a bootable disk using the same ISO it asks for "load boot information file". I don't know which file should I select. All I want is to create bootable disk of the customized PXES OS and mount in virtual box and test it?
View 1 Replies View RelatedHow can I create/boot CentOs 5.3 ram image?I'm looking to create a CentOs ram image that once booted will not access the hard drive.
View 3 Replies View RelatedI have a project needing ecdsa and ec support in Openssl. Unfortunatly the openssl in CentOS 5.6 Final are built without
this functionality. As my experience with CentOS are a little on the fresh side, I would like to know my options in this case.
How I can create key pair as ecdsa?
After I upgrade openssh until version 5.8p1, It's not work on command ssh-keygen -t ecdsa 256, I got feedback "unknown key type ecdsa
"...
What I have suppose to do? when I use openssl new update my server can't work properly again, so I decided to installation again.
Being new to this area .I have been assigned a task which i am unable to do . Can any one please help me .
I have requirement where i have input file XYZ_111_999_YYYYMMDD_1.TXT and with header and series of Numbers and Footer.
I want to create a mutiple output files with each file having a seperate code which is stored in text file and create XYZ_222_999_YYYYMMDD_1.TXT . and add date in the contents next to series of numbers .Like this
Before change the file looks like this
file name XYZ_111_999_YYYYMMDD_1.TXT
001,19SEP2009-14:05:05,000000003
1234
4567
6785
END_OF_DATA
[Code]....
I've downloaded the CentOS-5.4-i386-bin-1of6.iso
But it's size shows in Nautilus is 223.1 MB.
and in the Archive Mounter selecting all files/folders shows
Totaling 654 items and 622.1 MB.
Did got everything of Disk-1 ?
Top view of it shows:
Odd way because of my slow Internet download speed.
I lost my root .bash_profile. Have anyone, the .bash_profile contents of root to pass me?
View 3 Replies View RelatedCurrently i am using centos on vmware. ISO that i downloaded was bootable. Now i want to perform installation on my real system. If i use dd utility to copy iso image to DVD disc, will it also retain its bootable property as well ?
View 2 Replies View RelatedIs it possible to install CentOS 5.4 on a USB Flash Drive to boot from or even a LiveCD? I know with OpenSUSE 11.2 there is a LiveCD version and Ubuntu can be booted this way.
View 1 Replies View RelatedIs it a straightforward endeavour to burn a bootable iso of centos5.5 with k3b, or is there some hidden setting to make sure it is bootable?I have looked,and I haven't found anything.
View 3 Replies View RelatedI have a directory: /var/www/html/something/
and it's got tons of files and directories, some containing hidden files.
I want to move all the contents of something including hidden files up to the site root at: /var/www/html/
What is the proper command for this?
I'm trying to create new RAM image file to get my server load raid1 module upon start, I was following redhat documentation & it suggested to use the following command mkinited --with=raid1 inited-raid1-$(uname -r).img $(uname -r) However after running this command I'm getting this message No Kernel available for 'inited-2.6.18-128.el5"
View 4 Replies View RelatedI downloaded the iso image of Centos 5.4 from the website and burned it on the dvd....but its not making it bootable...What am i doing wrong?
View 3 Replies View RelatedI am running an application that requires use of my /etc/hosts file. In it, I have my machine name and its LAN ip address. The program creates a service on a specific port, then attempts to connect to it based on the host name. So my hosts file has to be correct.I added the nameservers to resolv.conf and now my application will not run. My guess is that the computer is checking the name servers first, timing out then checking the hosts file.Is there a way I can tell the system to check the hosts file first, then DNS. I thought it should behave that way by default, but it does not appear to.
View 1 Replies View RelatedI am facing problem on executing commands like df -h,ls-l,grep etc in /bin.
it is showing below errors:--
----------------------------------------------------------------------------------
login as: root
root@220.226.102.217's password:
Last login: Sat Jun 4 11:14:20 2011 from 220.227.54.149
-bash: /bin/egrep: cannot execute binary file
[code]....
I have a USB drive of 4 GB and I want to make the drive as bootable. I used the command /sbin/mkbootdisk --device /dev/sdb1 "kernal version" ( sdb1 is my pen drive).When i ran this cmd,it gave me an error saying not enough space to write.
View 3 Replies View RelatedI am noticing RHEL 5.4 is in beta. Does anyone know what 5.4's plans are for ext4? Is it still going to be a non-bootable addon? Or, will GRUB now boot off it?
View 1 Replies View Related