CentOS 5 Hardware :: LVM Logical Volume Not Seeing 1 Disk After Yum Update / Fix It?
Jun 1, 2011
I ran yum update on my centos 5.6 box a couple of days ago and following this the system would not reboot, dont recall the exact error and don't seem to be able to find it logged anywhere but it was something to do with LVM not being able to find a disk.
In the end I have booted to linux rescue and edited my /etc/fstab file so the system does not try to mount the offending volume group. This enables the system to boot but I need to find out what is wrong with the system and get this volume group accessible again. Here is my edited fstab showing the commented out line. code...
View 1 Replies
ADVERTISEMENT
Jun 5, 2009
I've added a new LUN to my Centos 5.2 server using Powerpath and have added it to an ext3 logical volume. I extended the logical volume using lvextend and the new space shows up correctly in lvdisplay. What I'm having problems with is getting Centos to see the new disk space (df -h shows 500GB, not 600GB as expected). I've tried running a resize2fs on the new volume but it tells me that "the filesystem is already n blocks long. Nothing to do". Does any one know where I'm going wrong? If possible I'd like to sort this without a reboot.
View 3 Replies
View Related
May 7, 2011
I have a system with a 2TB RAID level 1 installed (2 x 2TB drives, configured as RAID1 through the BIOS). I installed Centos 5.5 and it runs fine. I now added another 2x2TB drives and configured them as RAID1 through the BIOS.
How do I add this new RAID volume to the existing logical volume?
View 5 Replies
View Related
May 9, 2011
I have extended a logical volume from a partition on one disk into a entirely seperatedisk.I wish to extend the file system from the original partition onto the newly extend volume.I attempted this using extend2fs but it did not work, and did not mention why.The command I used was -$ sudo resize2fs /dev/glab1/glab-share1/I attempted this on ubuntu server 10.04.
View 5 Replies
View Related
Jul 21, 2010
Could anyone give the steps for converting a logical volume to a raw disk to mount Oracle ASM Instance on it?
View 2 Replies
View Related
Mar 17, 2010
how easy it would be to read the contents of a physical disk that was part of a larger logical volume. The disk contains a "Linux LVM" partition that spans its entire size. My problem is that one of my disks died, and I have to send it back for a warranty replacement. However, the disk is dead, and I can't zero it out. I'm just trying to assess how difficult it would be (or at least how likely it would be) for a tech that's checking out the disk to get at the data.
View 4 Replies
View Related
Jan 15, 2010
I'm wondering if there is a way to shrink an ext3 LV mount as / .I tried to with resize2fs ... but seems that isn't possible if the partition is mounted.
View 8 Replies
View Related
Apr 8, 2010
I have a huge RAID6 array 21TB+ already partitioned in GPT. This is to be used as the storage location for my company's backup server, and I want to access it as one logical volume. Is this possible with Centos5? I just discovered the product specifications for Centos5, and saw that the maximum file system size is 16TB, but LVM2 should support volumes up to 1EB. Is there any way I can make this work in Centos, or am I going to have to run a different distro?
View 1 Replies
View Related
Oct 16, 2009
I have a network (192.168.x.x) that I want to keep closed and private for the most part. I need however to get access to some files generated on the machines in this private network. So I first tried putting two cards in a machine running centos 5.2 and connecting one to the private newtork and the other to the public network. This worked somewhat but I was not able to see this bridging machine in the private network because I could not run 2 samba instances on this machine ( I need one for the public network). So I setup xen on a machine with the 2 NIC's and assigned one card to the host dom and the other to the guest dom which was connected to the private network.
This worked ok, but the only issue was the shared disk space. I couldn't use nfs because each machine operates in a different subnet and I don't know how to export a nfs drive across domains. So I created a logical volume on a disk and mounted this in both domains.
Here comes the question now. This works some times,. but at other times I copy files from the private machine to the shared volume but i can't see them from the other domain. Also sometimes the guest domain which houses the private network server hangs during boot up saying that the logical volume has been assigned and cannot be mounted.
1) Is what I'm doing using logical volumes across domains legal (best practise, etc)
2) Is there another way for me to achieve what I want (sharing a disk partition across domains).
View 1 Replies
View Related
Oct 17, 2009
I have a network (192.168.x.x) that I want to keep closed and private for the most part. I need however to get access to some files generated on the machines in this private network. So I first tried putting two cards in a machine running centos 5.2 and connecting one to the private newtork and the other to the public network. This worked somewhat but I was not able to see this bridging machine in the private network because I could not run 2 samba instances on this machine ( I need one for the public network). So I setup xen on a machine with the 2 NIC's and assigned one card to the host dom and the other to the guest dom which was connected to the private network.
This worked ok, but the only issue was the shared disk space. I couldn't use nfs because each machine operates in a different subnet and I don't know how to export a nfs drive across domains. So I created a logical volume on a disk and mounted this in both domains. This works some times,. but at other times I copy files from the private machine to the shared volume but i can't see them from the other domain. Also sometimes the guest domain which houses the private network server hangs during boot up saying that the logical volume has been assigned and cannot be mounted.
1) Is what I'm doing using logical volumes across domains legal (best practise, etc)
2) Is there another way for me to achieve what I want (sharing a disk partition across domains).
View 15 Replies
View Related
Feb 17, 2010
I'm sure many of you here have worked with disk quotas and lvm2 and my problem involves both. Basically what I'm wanting to do is have it so whenever a logical volume gets below a certain constraint (10Gb's) ie. it only has that much left - I want to automatically resize it to add 20 GB's. Obviously this can be done rather easily manually, and with a bit of python hacking it can be done programmatically but since this is for production use I was wondering if there was something a bit more fluid. Since this server is I/O intensive ZFS implemented via FUSE is not an option and neither is the still unstable BtrFS.
View 3 Replies
View Related
May 15, 2009
what the maximum number of logical volumes is for a volume group in LVM ? Is there any known performance hit for creating a large number of small logical volumes vs a small number of large volumes ?
View 1 Replies
View Related
Jun 22, 2009
I made a mistake with lvm2 on centos 5.2.
I used parted to create a partition inside the logical volume, and then merrily used that partition, which appeared as /dev/pv-whatever/lv-whateverp1
Of course I created the FS as ext3.
So, after a reboot, I can't access anything in that logical volume with standard tools, as /dev/pv-whatever now only has the lv-whatever special file inside.
I can look inside the LV with parted fine, but parted can't copy ext3 filesystems.
Is there any way to get the data out of a partition created INSIDE a logical volume if that filesystem is ext3?
View 1 Replies
View Related
Dec 1, 2010
I'm rearranging a bunch of disks on my server at home and I find myself in the position of wanting to move a bunch of LVM logical volumes to another volume group. Is there a simple way to do this? I saw mention of a cplv command but this seems to be either old or not something that was ever available for linux.
View 2 Replies
View Related
Aug 24, 2009
There is a disk 500 gb, it is broken on /boot and on /root and on /dev/sda1 and /dev/sda2. Whether prompt it is possible to redistribute a disk without loss of data namely it is necessary to make/boot and two equivalent on disk volume.
View 3 Replies
View Related
Jan 1, 2010
so i have f12 installed on my hd with lvm using the whole extent of the HD , i want to reduce it so i can dual boot it with a windows system, i managed to reduce the logical volume to free some space, but i cant seem to reduce the physical volume, is this possible and how ?
View 2 Replies
View Related
Jun 24, 2009
I dont know if this is possible or not but here what I would like to do. I have 6 linux server and each has 100GB disk space. All of these 6 box are compute nodes and space are not used really. However, If I can combine 6 servershard disk that will in total 6*100GB gives you quite a bigger space. Is there any tool or ways to mount these drive in one volume instead of mounting individually ?
View 2 Replies
View Related
Jul 1, 2010
I need to install a voice recording application on a server.My problem is that I have four hard disks with 150 GB storage space each. So I have 150*4 = 600 GB Storage available as whole .I need all four hard drives (600 GB ) as single volume to store and retrieve recording .
View 1 Replies
View Related
Aug 4, 2010
What is a logical volume? Why should we have them? Is there no need for grub on such a system? All kinds of problems since I tried to install Slackware!
View 3 Replies
View Related
Jul 13, 2010
I have cluster of 3 logical volumes making a filesystem, is there a tool or command out there that could tell me in which logical volume a file is?
View 3 Replies
View Related
Apr 7, 2010
I have a Fedora 8 system that uses LVM on one of it's drives (/dev/sdb2). One of the logical volumes is getting full (LogVol02). There is an unused, unmounted logical volume (LogVol03) available. I can see two possible options.
1) Mount the unused logical volume (LogVol03) on a new mount point (/home2) and create more space there
2) Delete the LogVol03 logical volume and extend the nearly full volume (LogVol02) into the now available space.
Option 2 seems like the better approach, since it will seem seamless to the system users. I'm looking for suggestions on how I should go about doing this and what I need to look out for. Is it better to use the command line tools (lvm ...) or the GUI (system-config-lvm) to do this?
View 2 Replies
View Related
May 19, 2010
My challenge today is a broken sound mixer in gnome. Yesterday I run 'yum update' and it installed about 200 updates. This morning I rebooted, when double-clicking the 'speaker' icon in the top right corner of my gnome and I got a "crash".
(I have to go to mixer and enable 'front speakers' before I get any sound - thats something else i'd like to fix one day) Here is what bug-buddy has to say:
Distribution: CentOS release 5.5 (Final)
Gnome Release: 2.16.0 2007-02-18 (CentOS)
BugBuddy Version: 2.16.0
Memory status: size: 265785344 vsize: 265785344 resident: 10158080 share: 7
[Code]...
Any advice would be great - i think I should start by reinstalling the gnome mixer, but not sure which 'yum' that is contained in. I did do some reading about rolling back, but I read that is by default disabled!! Arh! why! only when you broke something you realise you need to turn it on.... o well hey ho.
View 11 Replies
View Related
Nov 13, 2009
My computer: (Lenovo T61 Thinkpad, running fc11 for about 2 and half months). Apparently I when I made my partitions I didn't leave quite enough room in my root directory, because I just completely ran out. Here is how my hard drive is partitioned:
1 physical volume group (sda)
4 logical volumes (home, root, swap, var)
The root had about 15 gigs on it, which just filled up. When I restarted to see if that would help, when it rebooted it went fine up to the log-in screen. Instead of the usual fedora blue background, it was black except for the log-in window, which looked very low-res. A little pop-up kept coming up saying the GNOME power configuration settings failed to load or something. When I logged in, the whole screen was black except for the mouse, and I could get no response. I have plenty of space left in home, so I rebooted to rescue mode using the first fedora installation disk, and tried the following command:
Code:
lvreduce -L90G /dev/mapper/DRIVE
which only returned:
Code:
lvreduce: relocation error: lvreduce: symbol dm_tree_node_size_changed, version Base not defined in file libdevmapper.so.1.02
So I couldn't reduce the size of home, and thus couldn't increase the size of root.
IN SUMMARY:
a) the lack of memory in root the probable cause for my computer not working
b) there a good way to reduce home and increase root while running this live disk
Note: When I am looking at it now in the logical volume manager, it says that on the whole physical volume there is only 400MB free. However, when I last looked (about 30 mins before I started having problems) it said there were about 100 Gb free.
Edit: Nevermind. I did some more research and it turned out to be more of a gnome power manager thing rather than a memory space thing, although I'm certainly going to increase my root memory now.
View 3 Replies
View Related
Jul 22, 2011
I've got a big problem. Earlier this afternoon I tried to unlock my screen, but the password dialog didn't appear (the background did, and I could move the pointer, but no dialog). So I restarted the computer, only for the Fedora bootup icon to get about 3/4 of the way full before the screen blanked out and I got the message "Boot has failed. Sleeping forever." I booted into the liveCD and opened the system installer to see if maybe I could just reinstall the system in place while leaving my data intact. When I got to the partitioning stage, my old partition layout was there...except one LVM volume group was totally missing. And this is the volume group that contained my / and /home, among other things. Another volume group sitting on a different RAID was still there, but ironically it was the one for short-term data.
I have three hard drives, using soft RAID and LVM. Each drive is split into 4 partitions. The first partition of each is part of a RAID-1 where /boot sits. The second of each makes up a RAID-5 on which sits my "Main" volume group for my important data (this is the one that has gone AWOL). The third of each makes up a RAID-0 on which my "Volatile" volume group sits (for /tmp, /var/tmp, and the like). The fourth is swap.
Is there any chance I can restore my volume group so my data can be recovered? I'm not sure if I've got the full layout with volume sizes written down anywhere.
View 1 Replies
View Related
Jul 30, 2010
I have 3 harddisks, 1 for system and 2 for data.
To manage it more easy, I tied 2 harddisk in LVM. And I made an logical volume. It used ext4 for it's filesystem.
Today, I wanted to format and reinstall the system. So I booted the system using Ubuntu CD. But managing the partition, I accidently delete the logical volume. Because backup(/etc/lvm) was in itself, I couldn't restore the old config. I just create new logical volume.
As I expected, I couldn't mount it correctly. Mount said that "Mount: Mouting failed A on B! Invalid argument!"
I must recover it, because it has a lot of import data. What should I do?
View 1 Replies
View Related
Mar 6, 2011
I have a system with a single disk that is partitioned as below:
1) hda
hda1 - boot partition - 0.3GB
hda2 - System - 15.7GB
There are 2 volumes on single group. The boot partion is a physical volume and the system is a logical volume. The disk has more room up to 40GB. How can I extend the logical volume. Tried system-config-lvm, but it does not gives the option.
View 4 Replies
View Related
Jul 14, 2010
Hi. We have a cluster consisting of 10 logical volumes all part of one filesystem. Is there a way to know which logical volume owns a certain file/inode? I have tried what is suggested at this link, but the output is the filesystem and not a specific logical volume.
View 6 Replies
View Related
Jun 14, 2010
I just read and learned about logical volume management today. I have a server running RHEL5.4, LVM2. I have 1 physical volume, with one volume group, and 3 logical volumes. I have no free extents, nor do I have any in my volume group (not sure if it's possible to have free in one and not the other anyway), and I am running out of space on one of my logical volumes. Doing a df -h shows 96% of 9.7GB used on /dev/mapper/MainVG-root, mounted at /. So here's the stupid question: how can I find out what directories/files are taking up what space within this logical volume? As I said I have 3 all together, and the other 2 are mapped to /var and a /var pgsql sub-directory. I figured I could get the sizes of the other directories under / and drill down accordingly, but I seem to be missing some basic rule because the commands I am using and the values I am getting don't add up.
For example, it seemed logical to me to do an ls -lsh on / to try and identify the largest directories. Each directory is listed as being ~4-8K in size. That doesn't make sense to me. So I decided to do a du -sh on each directory. Having done this on all of the / sub-directories and added up those values, there is not enough reported usage here to equal 8.9GB of used space (as df -h / reports).how they would find out how the 9.7GB here is being allocated? Preferably without scripts as I am not ready to add a layer of complexity to this yet without understanding some fundamentals.
View 2 Replies
View Related
May 4, 2011
I (again) ran into trouble since two months i was trying out fedora lovelock "nightly build" in a virtualbox my host is Ubuntu 11.04 (previously 10.10 i upgraded yesterday) (had worked fine .. just was slow because i alloted only 512 MB ram) ... now i uninstalled virtualbox and deleted .virtualbox in home folder, but i couldn't recover my 8 GB space when i installed i made virtual disk fixed storage (my mistake i guess!! ) ) i don't know much about it either .. just wanted to try out fedora 15 so experimented it using virtuallbox ...
i'm running out of disk space (don't have bucks to purchase external hard disk .. otherwise i wouldn't have cared .. also don't have time to do a reinstallation of ubuntu/some other os (may be fedora) on my laptop ...
i just got 24 GB left .. i intend to store a few more movies and songs .. i would run out of disk space fairly quickly ... 8GB would be buffer if i get it back ...
View 3 Replies
View Related
Apr 22, 2011
I have a raid 5 with 5 disks, I had a disk failure which made my raid go down, after some struggle I got the raid5 up again and the faulty disk was replaced and rebuilt itself. After the disk rebuilt itself I tried doing a pvscan but could not find my /dev/md0. I followed some steps on the net to recreate the pv using the same uuid then restored the vg(storage) using a backup file. This all went fine.I can now see the PV, VG(storage) and LV's but when I try to mount it, I get a error "wrong fs type" I know that the lv's are reiserfs filesystems, so I did a reiserfsck on /dev/storage/software, this gives me the following error:reiserfs_open: the reiserfs superblock cannot be foundNow next step would be to rebuild then superblock, but I'm afraid that I might have configured something wrong on my raid or LVM and by overwriting the superblock I might not be able to go back and fix it once I've figured out what I didn't configure correctly.
View 5 Replies
View Related
